comparison src/g23m-aci/aci/cmh_mms.c @ 1:fa8dc04885d8

src/g23m-*: import from Magnetite
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 16 Oct 2020 06:25:50 +0000
parents
children
comparison
equal deleted inserted replaced
0:4e78acac3d88 1:fa8dc04885d8
1 /*
2 +-----------------------------------------------------------------------------
3 | Project : GSM-PS (6147)
4 | Modul : CMH_MMS
5 +-----------------------------------------------------------------------------
6 | Copyright 2002 Texas Instruments Berlin, AG
7 | All rights reserved.
8 |
9 | This file is confidential and a trade secret of Texas
10 | Instruments Berlin, AG
11 | The receipt of or possession of this file does not convey
12 | any rights to reproduce or disclose its contents or to
13 | manufacture, use, or sell anything it may describe, in
14 | whole, or in part, without the specific written consent of
15 | Texas Instruments Berlin, AG.
16 +-----------------------------------------------------------------------------
17 | Purpose : This module provides the set functions related to the
18 | protocol stack adapter for mobility management.
19 +-----------------------------------------------------------------------------
20 */
21
22 #ifndef CMH_MMS_C
23 #define CMH_MMS_C
24 #endif
25
26 #include "aci_all.h"
27
28 /*==== INCLUDES ===================================================*/
29 #include "aci_cmh.h"
30
31 #include "rtc.h"
32
33 #ifdef DTI
34 #include "dti.h" /* functionality of the dti library */
35 #include "dti_conn_mng.h"
36 #endif
37
38 #include "aci_mem.h"
39
40 #ifdef FAX_AND_DATA
41 /* #include "aci_fd.h" */
42 #endif /* of #ifdef FAX_AND_DATA */
43
44 #include "psa.h"
45 #include "psa_sim.h"
46 #include "psa_mm.h"
47 #include "cmh.h"
48 #include "cmh_sim.h"
49 #include "cmh_mm.h"
50
51 #include "psa_cc.h"
52 #include "cmh_cc.h"
53
54 #ifdef GPRS
55 #include "gaci.h"
56 #include "gaci_cmh.h"
57 #include "psa_gmm.h"
58 #include "cmh_gmm.h"
59 #endif
60
61 #ifndef _SIMULATION_
62 /***************************/
63 /* TEMPORARY until NVM */
64 /* just to get FFs !!!! */
65 #ifndef GPRS
66 #define DONT_LET_FFSH_DEF_GPRS
67 #endif
68
69 #include "ffs/ffs.h"
70
71 #include "rx.h"
72
73 #include "rtc.h"
74
75 #ifdef FF_TIMEZONE
76 #include "rv/rv_general.h"
77 #include "rtc/rtc_tz.h"
78 #endif
79
80 /* check whether latter has defined GPRS !!! */
81 #ifdef DONT_LET_FFSH_DEF_GPRS
82 #undef GPRS
83 #endif
84
85 #undef DONT_LET_FFSH_DEF_GPRS
86 /***************************/
87 #endif /* _SIMULATION_ */
88
89
90 /*==== CONSTANTS ==================================================*/
91
92 /*==== EXPORT =====================================================*/
93
94 /*==== VARIABLES ==================================================*/
95
96 /*==== FUNCTIONS ==================================================*/
97 EXTERN void wake_up_rr (void);
98
99 #ifdef TI_PS_FF_AT_P_CMD_CTREG
100 EXTERN BOOL cl_shrd_set_treg_val(T_TREG *treg);
101 #endif /* TI_PS_FF_AT_P_CMD_CTREG */
102
103 #ifndef _SIMULATION_
104 LOCAL void rx_Cb (drv_SignalID_Type *signal_params);
105 LOCAL UCHAR rx_sequence_Cb (void* arg);
106 #endif /* _SIMULATION_ */
107
108
109 /*
110 +--------------------------------------------------------------------+
111 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
112 | STATE : code ROUTINE : sAT_PercentBAND |
113 +--------------------------------------------------------------------+
114
115 PURPOSE : This is the functional counterpart to the %BAND AT command
116 which is responsible for configuring the way the mobile
117 deals with multiband.
118
119 <bandMode>: band switch mode.
120 <bandType>: band selection by user: coded in bitfield as following.
121 Bit set to 1 if band is set, 0 otherwise...
122
123 BITS: | 5 | 4 | 3 | 2 | 1 |
124 | GSM850 | E_GSM | GSM1900 | GSM1800 | GSM900 |
125 */
126
127 GLOBAL T_ACI_RETURN sAT_PercentBAND(T_ACI_CMD_SRC srcId,
128 T_ACI_BAND_MODE bandMode,
129 UBYTE bandType)
130 {
131 UBYTE ManufacturerBands;
132 UBYTE ubyte_dummy;
133
134 TRACE_FUNCTION("sAT_PercentBAND()");
135
136 /* check command source */
137 if(!cmh_IsVldCmdSrc (srcId))
138 {
139 return( AT_FAIL );
140 }
141
142 /* Check Parameter bandMode */
143 switch( bandMode )
144 {
145 case( BAND_MODE_Auto ):
146 bandType = 0x00; /* scan all */
147 break;
148
149 case( BAND_MODE_Manual ):
150 /* Check Parameter bandType */
151 if(cmhMM_getBandSettings(&ubyte_dummy, &ManufacturerBands))
152 {
153 TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS successful");
154 }
155 else
156 {
157 TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS failed");
158 }
159
160
161 if( !cmhMM_isBandAllowed(bandType, ManufacturerBands) )
162 {
163 TRACE_EVENT_P1("Band combination %d is not supported by this hardware", bandType);
164 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
165 return( AT_FAIL );
166 }
167 break;
168
169 default:
170 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
171 return( AT_FAIL );
172 }
173
174 if( !cmhMM_writeSetBand(bandType) )
175 return(AT_FAIL);
176
177 /* switch off radio */
178 if( CFUNfun EQ CFUN_FUN_Full )
179 {
180 /* if mobile is on, proceed a soft switch off
181 and then switch back on */
182 mmEntStat.curCmd = AT_CMD_BAND;
183
184 return( sAT_PlusCFUN( srcId,
185 CFUN_FUN_Disable_TX_RX_RF,
186 CFUN_RST_NotPresent) );
187 }
188 else
189 {
190 /* new configuration has been written to Flash and that's it ! */
191 return( AT_CMPL);
192 }
193 }
194
195 /*
196 +--------------------------------------------------------------------+
197 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
198 | STATE : code ROUTINE : sAT_PlusCOPS |
199 +--------------------------------------------------------------------+
200
201 PURPOSE : This is the functional counterpart to the +COPS AT command
202 which is responsible for selection and deselection of an
203 network operator.
204
205 <mode>: registration mode.
206 <format>: format of operator selection
207 <oper>: operator string
208 */
209
210 GLOBAL T_ACI_RETURN sAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
211 T_ACI_COPS_MOD mode,
212 T_ACI_COPS_FRMT format,
213 CHAR * oper )
214 {
215 return(sat_Plus_Percent_COPS(srcId,
216 mode,
217 format,
218 oper,
219 AT_CMD_COPS));
220 }
221
222
223 /*
224 +--------------------------------------------------------------------+
225 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
226 | STATE : code ROUTINE : sAT_PercentCOPS |
227 +--------------------------------------------------------------------+
228
229 PURPOSE : This is the functional counterpart to the %COPS AT command
230 which is responsible for selection and deselection of an
231 network operator. %COPS will add, in principle,
232 the following functionality to the standard AT command +COPS:
233
234 -Possibility to query the "service status" in which the phone is currently registered;
235 the possible values will be "full service", "limited service" or "no service".
236 -Possibility to select the "last registered" operator using %COPS=1.
237
238
239 <mode>: registration mode.
240 <format>: format of operator selection
241 <oper>: operator string
242 */
243
244 GLOBAL T_ACI_RETURN sAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
245 T_ACI_COPS_MOD mode,
246 T_ACI_COPS_FRMT format,
247 CHAR * oper )
248 {
249 return(sat_Plus_Percent_COPS(srcId,
250 mode,
251 format,
252 oper,
253 AT_CMD_P_COPS));
254 }
255
256 #ifdef TI_PS_FF_AT_CMD_WS46
257 /*
258 +--------------------------------------------------------------------+
259 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
260 | STATE : code ROUTINE : sAT_PlusWS46 |
261 +--------------------------------------------------------------------+
262
263 PURPOSE : This is the functional counterpart to the +WS46 AT
264 command which is responsible to select wireless network.
265
266 <mode>: network mode.
267 */
268
269 GLOBAL T_ACI_RETURN sAT_PlusWS46 (T_ACI_CMD_SRC srcId,
270 T_ACI_WS46_MOD mode )
271 {
272
273 TRACE_FUNCTION ("sAT_PlusWS46()");
274
275 /*
276 *-------------------------------------------------------------------
277 * process the value parameter
278 *-------------------------------------------------------------------
279 */
280 if( mode NEQ ACI_NumParmNotPresent )
281 {
282 if( mode NEQ WS46_MOD_Gsm )
283 {
284 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
285 return( AT_FAIL );
286 }
287 }
288
289 return( AT_CMPL );
290 }
291 #endif /* TI_PS_FF_AT_CMD_WS46 */
292
293
294 /*
295 +--------------------------------------------------------------------+
296 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
297 | STATE : code ROUTINE : tAT_PercentALS |
298 +--------------------------------------------------------------------+
299
300 PURPOSE : This is the functional counterpart to the %ALS AT command
301 which is responsible for testing if ALS mode is present.
302 (always if an E-Plus Sim-card is detected or the if the CSP
303 field is present on the inserted Sim-card and enables
304 ALS mode).
305
306
307 */
308 GLOBAL T_ACI_RETURN tAT_PercentALS ( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *ALSmode )
309
310 {
311 TRACE_FUNCTION ("tAT_PercentALS()");
312
313 if( !cmh_IsVldCmdSrc( srcId ) )
314 {
315 return( AT_FAIL );
316 }
317
318 #if defined(FF_BAT) && defined(_SIMULATION_)
319 /* test command %ALS is not used anymore by BAT.lib, change CMD MODE only for host tests */
320 if(aci_cmd_src_mode_get(srcId) EQ CMD_MODE_BAT)
321 {
322 aci_cmd_src_mode_set((UBYTE)srcId, CMD_MODE_ATI);
323 }
324 #endif /* FF_BAT && _SIMULATION_ */
325
326 /* E-Plus SIM-Card inserted (mcc=0x262, mnc=0x03) ? */
327 if (cmhSIM_plmn_is_hplmn(0x262, 0x03F))
328 {
329 *ALSmode = (T_ACI_ALS_MOD)(ALS_MOD_SPEECH | ALS_MOD_AUX_SPEECH);
330 return (AT_CMPL);
331 }
332
333 simEntStat.curCmd = AT_CMD_ALS;
334 simShrdPrm.owner = (T_OWN)srcId;
335 simEntStat.entOwn = srcId;
336
337 ccShrdPrm.als_cmd = ALS_CMD_TEST;
338 *ALSmode = ALS_MOD_NOTPRESENT;
339
340 cmhCC_checkALS_Support();
341 return (AT_EXCT);
342 }
343
344
345
346 /*
347 +--------------------------------------------------------------------+
348 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
349 | STATE : code ROUTINE : sAT_PercentNRG |
350 +--------------------------------------------------------------------+
351
352 PURPOSE : This is the functional counterpart to the %NRG AT command
353 which is responsible for the setting of registration mode
354 and service mode.
355
356 <regMode>: registration mode.
357 <srvMode>: service mode.
358 */
359
360 GLOBAL T_ACI_RETURN sAT_PercentNRG( T_ACI_CMD_SRC srcId,
361 T_ACI_NRG_RGMD regMode,
362 T_ACI_NRG_SVMD srvMode,
363 T_ACI_NRG_FRMT oprFrmt,
364 CHAR *opr)
365 {
366 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
367
368
369 TRACE_FUNCTION ("sAT_PercentNRG()");
370
371
372 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
373
374
375 /*
376 *-------------------------------------------------------------------
377 * check MM entity status
378 *-------------------------------------------------------------------
379 */
380 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
381
382 return( AT_BUSY );
383
384
385
386
387 /*
388 *-------------------------------------------------------------------
389 * process the oprFrmt,svrMode and regMode parameters
390 *-------------------------------------------------------------------
391 */
392 switch( oprFrmt )
393 {
394 case( NRG_FRMT_NotPresent ):
395 oprFrmt = pMMCmdPrm -> NRGoprFrmt;
396 break;
397 case( NRG_FRMT_Long ):
398 case( NRG_FRMT_Short ):
399 case( NRG_FRMT_Numeric ):
400 break;
401 default:
402 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
403 return( AT_FAIL );
404 }
405
406 if( srvMode EQ NRG_SVMD_NotPresent )
407 srvMode=(T_ACI_NRG_SVMD)pMMCmdPrm->NRGregMode;
408
409 if( regMode EQ NRG_RGMD_NotPresent )
410 regMode=pMMCmdPrm->NRGregMode;
411
412
413
414 /* Set the value of the current command executed */
415 mmEntStat.curCmd = AT_CMD_NRG;
416
417
418 return cmhMM_OperatorSelect(srcId,regMode,srvMode,oprFrmt,opr);
419 }
420
421 /*
422 +--------------------------------------------------------------------+
423 | PROJECT : ACI/MMI MODULE : CMH_MMS |
424 | STATE : code ROUTINE : sAT_PercentCSQ |
425 +--------------------------------------------------------------------+
426
427 PURPOSE : This is the function for Signal Quality
428 Param:
429 srcId: command ID;
430 CSQmode: enable(1) or disable(0) CSQ
431
432 Shen,Chao
433 Juni.13th, 2003
434 */
435
436 GLOBAL T_ACI_RETURN sAT_PercentCSQ( T_ACI_CMD_SRC srcId,
437 T_ACI_CSQ_MODE CSQmode)
438 {
439
440 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
441
442 if( !cmh_IsVldCmdSrc( srcId ) )
443 {
444 return( AT_FAIL );
445 }
446
447 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
448
449 switch(CSQmode)
450 {
451 case( CSQ_Enable):
452 {
453 if ( pMMCmdPrm->CSQworkStat EQ CSQ_Enable )
454 {
455 TRACE_EVENT("CSQ is already enabled");
456 }
457 else
458 {
459 cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Enable;
460 if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) AND
461 (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam NEQ CMER_INDICATOR_2) )
462 { /* rx_Init() not yet called from CIND service */
463 #ifndef _SIMULATION_
464 rx_Init(rx_Cb);
465 #endif /* _SIMULATION_ */
466 }
467 }
468 break;
469 }
470
471 case(CSQ_Disable):
472 {
473 if ( pMMCmdPrm->CSQworkStat EQ CSQ_Enable )
474 {
475 cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Disable;
476 if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) &&
477 (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam NEQ CMER_INDICATOR_2) )
478 { /* CIND service inactive -> no more reading the signal strength necessary */
479 #ifndef _SIMULATION_
480 rx_Init(NULL);
481 #endif /* _SIMULATION_ */
482 }
483 }
484 break;
485 }
486 default:
487 return(AT_FAIL);
488 }
489 return( AT_CMPL);
490 }
491
492
493 /*
494 +--------------------------------------------------------------------+
495 | PROJECT : ACI/MMI MODULE : CMH_MMS |
496 | STATE : code ROUTINE : sAT_Plus CIND |
497 +--------------------------------------------------------------------+
498
499 PURPOSE : This is the function to setup the indications toward
500 terminal
501 */
502
503 GLOBAL T_ACI_RETURN sAT_PlusCIND( T_ACI_CMD_SRC srcId,
504 T_ACI_CIND_SIGNAL_TYPE sCindSgnalSettings,
505 T_ACI_CIND_SMSFULL_TYPE sCindSmsFullSettings )
506 {
507 T_ACI_MM_CIND_VAL_TYPE *pMMCindPrm;
508 T_ACI_MM_CMER_VAL_TYPE *pMMCmerPrm;
509 T_ACI_CIND_SIGNAL_TYPE sOldSignalSetting;
510
511 TRACE_EVENT( "sAT_PlusCIND()" );
512
513 if( !cmh_IsVldCmdSrc( srcId ) )
514 {
515 return( AT_FAIL );
516 }
517
518 pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
519 pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
520
521 if( sCindSgnalSettings EQ CIND_SIGNAL_INDICATOR_INVALID OR
522 sCindSmsFullSettings EQ CIND_SMSFULL_INDICATOR_INVALID )
523 {
524 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
525 return( AT_FAIL );
526 }
527
528 sOldSignalSetting = pMMCindPrm->sCindSignalParam;
529 pMMCindPrm->sCindSignalParam = sCindSgnalSettings;
530 pMMCindPrm->sCindSmsFullParam = sCindSmsFullSettings;
531
532 /* ----------------- signal strength setting part ------------------------ */
533 if( sOldSignalSetting <= CIND_SIGNAL_INDICATOR_LVL0 )
534 { /* the old (previews) signal setting is off */
535 if( (sCindSgnalSettings > CIND_SIGNAL_INDICATOR_LVL0) AND
536 (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND
537 (pMMCmerPrm->sCmerIndParam NEQ CMER_INDICATOR_2) )
538 { /* greather LVL0 --> rx_Init must be initialize... */
539 #ifndef _SIMULATION_
540 rx_Init(rx_Cb);
541 #endif /* _SIMULATION_ */
542 }
543 }
544 else
545 { /* the old (previews) signal setting is on */
546 if( (sCindSgnalSettings EQ CIND_SIGNAL_INDICATOR_LVL0) AND
547 (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND
548 (pMMCmerPrm->sCmerIndParam NEQ CMER_INDICATOR_2) )
549 { /* LVL0 --> rx_Init must be reset... */
550 #ifndef _SIMULATION_
551 rx_Init(NULL);
552 #endif /* _SIMULATION_ */
553 }
554 }
555 return(AT_CMPL);
556 }
557
558 /*
559 +--------------------------------------------------------------------+
560 | PROJECT : ACI/MMI MODULE : CMH_MMS |
561 | STATE : code ROUTINE : sAT_Plus CMER |
562 +--------------------------------------------------------------------+
563
564 PURPOSE : This is the function to setup the buffer control for the
565 indications toward terminal equipment
566 */
567
568 GLOBAL T_ACI_RETURN sAT_PlusCMER( T_ACI_CMD_SRC srcId,
569 T_ACI_CMER_MODE_TYPE sCmerModeSettings,
570 T_ACI_CMER_IND_TYPE sCmerIndicationSettings,
571 T_ACI_CMER_BFR_TYPE sCmerBfrSettings )
572 {
573 T_ACI_MM_CMER_VAL_TYPE *pMMCmerPrm;
574 T_ACI_MM_CIND_VAL_TYPE *pMMCindPrm;
575 T_ACI_CMER_IND_TYPE sOldCmerIndSetting;
576
577 TRACE_EVENT( "sAT_PlusCMER()" );
578
579 if( !cmh_IsVldCmdSrc( srcId ) )
580 {
581 return( AT_FAIL );
582 }
583
584 pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
585 pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
586
587 sOldCmerIndSetting = pMMCmerPrm->sCmerIndParam;
588 if( sCmerModeSettings NEQ CMER_MODE_INVALID )
589 {
590 pMMCmerPrm->sCmerModeParam = sCmerModeSettings;
591 }
592 if( sCmerIndicationSettings NEQ CMER_INDICATOR_INVALID )
593 {
594 pMMCmerPrm->sCmerIndParam = sCmerIndicationSettings;
595 }
596 if( sCmerBfrSettings NEQ CMER_BFR_INVALID )
597 {
598 pMMCmerPrm->sCmerBfrParam = sCmerBfrSettings;
599 }
600
601 /* ---------------- maybe switch on all indication settings ------------- */
602 if( sOldCmerIndSetting NEQ CMER_INDICATOR_2 )
603 { /* the old (previews) indicator setting is 'off' */
604 if( (sCmerIndicationSettings EQ CMER_INDICATOR_2) AND
605 (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND
606 (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
607 { /* all indications must be show --> rx_Init must be initialize... */
608 #ifndef _SIMULATION_
609 rx_Init(rx_Cb);
610 #endif /* _SIMULATION_ */
611 }
612 }
613 else
614 { /* the old (previews) signal setting is on */
615 if( (sCmerIndicationSettings NEQ CMER_INDICATOR_2) AND
616 (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND
617 (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
618 { /* LVL0 --> rx_Init must be reset... */
619 #ifndef _SIMULATION_
620 rx_Init(NULL);
621 #endif /* _SIMULATION_ */
622 }
623 }
624
625 return(AT_CMPL);
626 }
627
628
629 /*
630 +--------------------------------------------------------------------+
631 | PROJECT : ACI/MMI MODULE : CMH_MMS |
632 | STATE : code ROUTINE : sAT_PercentCSQ |
633 +--------------------------------------------------------------------+
634
635 PURPOSE : This is the callback function for Signal Quality
636 Param:
637 signal_params callback function name
638
639 Shen,Chao
640 Juni.13th, 2003
641 */
642
643 #ifndef _SIMULATION_
644 LOCAL void rx_Cb (drv_SignalID_Type *signal_params)
645 {
646 rx_Status_Type *para = NULL;
647
648 TRACE_EVENT("rx_Cb()");
649
650 ACI_MALLOC(para,sizeof(rx_Status_Type));
651
652 para->actLevel = ((rx_Status_Type *) signal_params->UserData)->actLevel;
653 para->gsmLevel = ((rx_Status_Type *) signal_params->UserData)->gsmLevel;
654 para->rxQuality = ((rx_Status_Type *) signal_params->UserData)->rxQuality;
655 #ifdef FF_PS_RSSI
656 para->min_access_level = ((rx_Status_Type *) signal_params->UserData)->min_access_level;
657 #endif
658
659 if (!cmh_set_delayed_call (rx_sequence_Cb, (void *)para))
660 {
661 /* Implements Measure#32: Row 990 */
662 TRACE_EVENT("Error, can not set the delayed resequence callback for AT_CMD_CSQ");
663 ACI_MFREE(para);
664 return ;
665 }
666
667 TRACE_EVENT("delayed requence call back requested: 100 ms");
668 cmh_start_delayed_call (20);
669
670 return;
671
672 }
673 #endif /* _SIMULATION_ */
674
675 /*
676 +--------------------------------------------------------------------+
677 | PROJECT : ACI/MMI MODULE : CMH_MMS |
678 | STATE : code ROUTINE : sAT_PercentCSQ |
679 +--------------------------------------------------------------------+
680
681 PURPOSE : This is the delayed callback function for Signal Quality
682 Shen,Chao
683 Juni.13th, 2003
684 */
685 #ifndef _SIMULATION_
686 LOCAL UCHAR rx_sequence_Cb (void* arg)
687 {
688 int i;
689 UBYTE rssi;
690 UBYTE ber;
691 #ifdef FF_PS_RSSI
692 UBYTE min_access_level;
693 #endif
694 T_ACI_CIND_SIGNAL_TYPE sSignalStrength;
695 T_ACI_MM_CIND_VAL_TYPE sIndValues;
696
697 struct rx_Status_Type* tmp_p = (struct rx_Status_Type*) arg;
698
699 TRACE_EVENT("rx_sequence_Cb()");
700
701 sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
702
703 if ( tmp_p->gsmLevel EQ 0xFF OR tmp_p->gsmLevel EQ 0 )
704 {
705 rssi = ACI_RSSI_FAULT;
706 sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
707 }
708 else if ( tmp_p->gsmLevel > 59 )
709 {
710 rssi = 31;
711 }
712 else
713 {
714 rssi = ( tmp_p->gsmLevel / 2 ) + 2;
715 }
716
717 if ( tmp_p->rxQuality EQ RX_QUAL_UNAVAILABLE )
718 {
719 ber = ACI_BER_FAULT;
720 }
721 else
722 {
723 ber = tmp_p->rxQuality;
724 }
725
726 #ifdef FF_PS_RSSI
727 if ( tmp_p->min_access_level EQ RX_ACCE_UNAVAILABLE)
728 {
729 min_access_level = ACI_MIN_RXLEV_FAULT;
730 }
731 else
732 {
733 min_access_level = tmp_p->min_access_level;
734 }
735 #endif
736
737 for( i = CMD_SRC_LCL; i < CMD_SRC_MAX; i++)
738 {
739 if (cmhPrm[i].mmCmdPrm.CSQworkStat EQ CSQ_Enable)
740 {
741 #ifdef FF_PS_RSSI
742 R_AT (RAT_CSQ, (T_ACI_CMD_SRC)i) (rssi, ber, tmp_p->actLevel, min_access_level);
743 #else
744 R_AT (RAT_CSQ, (T_ACI_CMD_SRC)i) (rssi,ber,tmp_p->actLevel);
745 #endif
746 }
747 /* ==================== process the service of +CIEV ========================== */
748 sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
749 if( tmp_p->gsmLevel >= 11 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL1; };
750 if( tmp_p->gsmLevel >= 21 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL2; };
751 if( tmp_p->gsmLevel >= 32 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL3; };
752 if( tmp_p->gsmLevel >= 42 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL4; };
753 if( tmp_p->gsmLevel >= 52 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL5; };
754 sIndValues.sCindSignalParam = sSignalStrength;
755 sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
756 if( ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam > CIND_SIGNAL_INDICATOR_LVL0) AND
757 (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam >= sIndValues.sCindSignalParam) AND
758 (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam EQ CMER_INDICATOR_2)) OR
759 ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam < sIndValues.sCindSignalParam) AND
760 (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam EQ CMER_INDICATOR_1)) )
761 {
762 TRACE_EVENT("send +CIEV");
763 R_AT (RAT_CIEV, (T_ACI_CMD_SRC)i) ( sIndValues, cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings );
764 }
765 }
766
767 if (!cmh_set_delayed_call (NULL, NULL))
768 { /* reset this callback pointer -> will be set again via rx_Cb */
769 /* Implements Measure#32: Row 991 */
770 TRACE_EVENT("Can not reset the delayed resequence callback for AT_CMD_CSQ");
771 return FALSE;
772 }
773 ACI_MFREE(tmp_p);
774
775 return TRUE;
776 }
777 #endif /* _SIMULATION_ */
778
779 /*
780 +--------------------------------------------------------------------+
781 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
782 | STATE : code ROUTINE : sAT_PercentCHPL |
783 +--------------------------------------------------------------------+
784
785 PURPOSE : This is the functional counterpart to the %CHPL AT command
786 which will return the list of entries in EF_HPLMNwAcT.
787
788 <mode>: registration mode.
789 <format>: format of operator selection
790 <oper>: operator string
791 */
792
793 GLOBAL T_ACI_RETURN sAT_PercentCHPL ( T_ACI_CMD_SRC srcId,
794 T_ACI_OPER_NTRY *oper )
795 {
796 T_OPER_ENTRY plmnDesc;
797 BOOL found;
798 SHORT mccBuf;
799 SHORT mncBuf;
800
801 TRACE_FUNCTION ("sAT_PercentCHPL()");
802
803 /*
804 *-------------------------------------------------------------------
805 * check whether SIM is ready
806 *-------------------------------------------------------------------
807 */
808 if (!cmhSIM_CheckSimStatus ())
809 {
810 return AT_FAIL;
811 }
812
813 /*
814 *-------------------------------------------------------------------
815 * check command source
816 *-------------------------------------------------------------------
817 */
818 if(!cmh_IsVldCmdSrc (srcId))
819 {
820 TRACE_EVENT_P1("sAT_PercentCHPL(): Invalid source: %d", srcId);
821 return( AT_FAIL );
822 }
823 if(!cmhMM_GetActingHPLMN(&mccBuf, &mncBuf))/* Enhancement Acting HPLMN*/
824 {
825 cmhSIM_GetHomePLMN (&mccBuf, &mncBuf);
826 }
827
828 found = cmhMM_FindPLMN (&plmnDesc, mccBuf, mncBuf, NOT_PRESENT_16BIT, FALSE);
829 if (!found)
830 {
831 TRACE_EVENT_P2("sAT_PercentCHPL(): MCC/MN not found in database (0x%X, 0x%X", mccBuf, mncBuf);
832 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal);
833 return( AT_FAIL );
834 }
835
836 strcpy (oper->longName, plmnDesc.longName);
837 strcpy (oper->shrtName, plmnDesc.shrtName);
838 oper->mcc = plmnDesc.mcc;
839 oper->mnc = plmnDesc.mnc;
840 oper->pnn = plmnDesc.pnn;
841 oper->long_len = plmnDesc.long_len;
842 oper->shrt_len = plmnDesc.shrt_len;
843
844 return (AT_CMPL);
845 }
846
847 /*
848 +--------------------------------------------------------------------+
849 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
850 | STATE : code ROUTINE : sAT_PlusCTZR |
851 +--------------------------------------------------------------------+
852
853 PURPOSE : This is the functional counterpart to the +CTZR AT command
854 which will set the status of CTZRmode, indicating whether time
855 zone change rep[orting is enabled or disabled.
856
857 <on/off>: Indicates whether time zone reporting is enabled or disabled.
858 */
859
860 GLOBAL T_ACI_RETURN sAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
861 T_ACI_CTZR_MODE mode)
862 {
863 TRACE_FUNCTION ("sAT_PlusCTZR()");
864
865 /*
866 *-------------------------------------------------------------------
867 * check command source
868 *-------------------------------------------------------------------
869 */
870 if(!cmh_IsVldCmdSrc (srcId))
871 {
872 TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid source: %d", srcId);
873 return( AT_FAIL );
874 }
875
876 /*
877 *-------------------------------------------------------------------
878 * process the mode parameter
879 *-------------------------------------------------------------------
880 */
881 switch (mode)
882 {
883 case CTZR_MODE_OFF:
884 case CTZR_MODE_ON:
885 cmhPrm[srcId].mmCmdPrm.CTZRMode = mode;
886 break;
887
888 default:
889 TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid mode: %d", mode);
890 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
891 return( AT_FAIL );
892 }
893
894 return( AT_CMPL );
895 }
896
897
898 /*
899 +--------------------------------------------------------------------+
900 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
901 | STATE : code ROUTINE : sAT_PlusCTZU |
902 +--------------------------------------------------------------------+
903
904 PURPOSE : This is the functional counterpart to the +CTZU AT command
905 which will set the status of CTZUmode, indicating whether automatic time
906 zone update is enabled or disabled.
907
908 <on/off>: Indicates whether automatic time zone update is enabled or disabled.
909 */
910
911 GLOBAL T_ACI_RETURN sAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
912 T_ACI_CTZU_MODE mode)
913 {
914 TRACE_FUNCTION ("sAT_PlusCTZU()");
915
916 /*
917 *-------------------------------------------------------------------
918 * check command source
919 *-------------------------------------------------------------------
920 */
921 if(!cmh_IsVldCmdSrc (srcId))
922 {
923 TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid source: %d", srcId);
924 return( AT_FAIL );
925 }
926
927 /*
928 *-------------------------------------------------------------------
929 * process the mode parameter
930 *-------------------------------------------------------------------
931 */
932 switch (mode)
933 {
934 case CTZU_MODE_OFF:
935 case CTZU_MODE_ON:
936 cmhPrm[srcId].mmCmdPrm.CTZUMode = mode;
937 break;
938
939 default:
940 TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid mode: %d", mode);
941 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
942 return( AT_FAIL );
943 }
944
945 return( AT_CMPL );
946 }
947
948
949 /*
950 +--------------------------------------------------------------------+
951 | PROJECT : MODULE : CMH_MMS |
952 | STATE : code ROUTINE : sAT_PlusCCLK |
953 +--------------------------------------------------------------------+
954
955 PURPOSE : This is the functional counterpart to the +CCLK AT command
956 which will set the real time clock of the ME
957 */
958
959 GLOBAL T_ACI_RETURN sAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
960 T_ACI_RTC_DATE *date_s,
961 T_ACI_RTC_TIME *time_s,
962 int timeZone
963 )
964 {
965 #ifndef _SIMULATION_
966 UBYTE ret;
967 #endif /* _SIMULATION_ */
968
969 TRACE_FUNCTION ("sAT_PlusCCLK()");
970
971 /*
972 *-------------------------------------------------------------------
973 * check command source
974 *-------------------------------------------------------------------
975 */
976 if(!cmh_IsVldCmdSrc (srcId))
977 {
978 TRACE_EVENT_P1("sAT_PlusCCLK(): Invalid source: %d", srcId);
979 return( AT_FAIL );
980 }
981
982 /*
983 *-------------------------------------------------------------------
984 * Set the time in the RTC
985 *-------------------------------------------------------------------
986 */
987 #ifndef _SIMULATION_
988 ret = rtc_set_time_date( (T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s);
989
990 switch (ret)
991 {
992 case 0: /* RVF_OK. Date and time set ok*/
993 #ifndef FF_TIMEZONE
994 return( AT_CMPL );
995 #else /* FF_TIMEZONE */
996 ret = RTC_SetCurrentTZ((T_RTC_TZ)timeZone); /* Set current timezone now time and date are set.*/
997 switch (ret)
998 {
999 case 0: /* RVF_OK. RTC current TZ set ok*/
1000 return( AT_CMPL );
1001
1002 default:
1003 TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR1: %d", ret); /* RTC setting failed */
1004 return( AT_FAIL );
1005 }
1006 #endif /* FF_TIMEZONE */
1007
1008 default: /* RVF_NOT_READY or RVF_INTERNAL ERROR or RVF_INVALID_PARAMETER */
1009 TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR2: %d", ret); /* Date and time setting failed */
1010 return( AT_FAIL );
1011 }
1012 #else /* _SIMULATION_ */
1013 return( AT_CMPL );
1014 #endif /* _SIMULATION_ */
1015
1016 }
1017
1018 /*
1019 +--------------------------------------------------------------------+
1020 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1021 | STATE : code ROUTINE : sAT_PercentCTZV |
1022 +--------------------------------------------------------------------+
1023
1024 PURPOSE : This is the functional counterpart to the %CTZV AT command
1025 which will set the status of PCTZVmode, indicating whether time and date report
1026 is enabled or disabled.
1027
1028 <on/off>: Indicates whether time and date report is enabled or disabled.
1029 */
1030
1031 GLOBAL T_ACI_RETURN sAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
1032 T_ACI_PCTZV_MODE mode)
1033 {
1034 TRACE_FUNCTION ("sAT_PercentCTZV()");
1035
1036 /*
1037 *-------------------------------------------------------------------
1038 * check command source
1039 *-------------------------------------------------------------------
1040 */
1041 if(!cmh_IsVldCmdSrc (srcId))
1042 {
1043 TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid source: %d", srcId);
1044 return( AT_FAIL );
1045 }
1046
1047 /*
1048 *-------------------------------------------------------------------
1049 * process the mode parameter
1050 *-------------------------------------------------------------------
1051 */
1052 switch (mode)
1053 {
1054 case PCTZV_MODE_OFF:
1055 case PCTZV_MODE_ON:
1056 cmhPrm[srcId].mmCmdPrm.PCTZVMode = mode;
1057 break;
1058
1059 default:
1060 TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid mode: %d", mode);
1061 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1062 return( AT_FAIL );
1063 }
1064
1065 return( AT_CMPL );
1066 }
1067
1068
1069 /*
1070 +--------------------------------------------------------------------+
1071 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1072 | STATE : code ROUTINE : sAT_PercentCNIV |
1073 +--------------------------------------------------------------------+
1074
1075 PURPOSE : This is the functional counterpart to the %CNIV AT command
1076 which will set the status of CNIVmode, indicating whether time and date report
1077 is enabled or disabled.
1078
1079 <on/off>: Indicates whether time and date report is enabled or disabled.
1080 */
1081
1082 GLOBAL T_ACI_RETURN sAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
1083 T_ACI_CNIV_MODE mode)
1084 {
1085 TRACE_FUNCTION ("sAT_PercentCNIV()");
1086
1087 /*
1088 *-------------------------------------------------------------------
1089 * check command source
1090 *-------------------------------------------------------------------
1091 */
1092 if(!cmh_IsVldCmdSrc (srcId))
1093 {
1094 TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid source: %d", srcId);
1095 return( AT_FAIL );
1096 }
1097
1098 /*
1099 *-------------------------------------------------------------------
1100 * process the mode parameter
1101 *-------------------------------------------------------------------
1102 */
1103 switch (mode)
1104 {
1105 case CNIV_MODE_OFF:
1106 case CNIV_MODE_ON:
1107 cmhPrm[srcId].mmCmdPrm.CNIVMode = mode;
1108 break;
1109
1110 default:
1111 TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid mode: %d", mode);
1112 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1113 return( AT_FAIL );
1114 }
1115
1116 return( AT_CMPL );
1117 }
1118
1119 /*
1120 +--------------------------------------------------------------------+
1121 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1122 | STATE : code ROUTINE : sAT_PercentCWUP |
1123 +--------------------------------------------------------------------+
1124
1125 PURPOSE : This is the functional counterpart to the +CWUP AT command
1126 which will force RR to trigger a power campaign.
1127
1128 */
1129
1130 GLOBAL T_ACI_RETURN sAT_PercentCWUP ( T_ACI_CMD_SRC srcId, T_ACI_CWUP_TYPE type )
1131 {
1132 TRACE_FUNCTION ("sAT_PercentCWUP()");
1133
1134 /*
1135 *-------------------------------------------------------------------
1136 * check command source
1137 *-------------------------------------------------------------------
1138 */
1139 if(!cmh_IsVldCmdSrc (srcId))
1140 {
1141 TRACE_EVENT_P1("sAT_PercentCWUP(): Invalid source: %d", srcId);
1142 return( AT_FAIL );
1143 }
1144
1145 /*
1146 *-------------------------------------------------------------------
1147 * check entity status
1148 *-------------------------------------------------------------------
1149 */
1150 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
1151 {
1152 TRACE_EVENT("sAT_PercentCWUP(): MM is busy");
1153 return( AT_BUSY );
1154 }
1155
1156 wake_up_rr();
1157
1158 return( AT_CMPL );
1159 }
1160
1161 /*
1162 +--------------------------------------------------------------------+
1163 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1164 | STATE : code ROUTINE : sAT_PlusCOPS |
1165 +--------------------------------------------------------------------+
1166
1167 PURPOSE : This function encapsulates the functionality of +COPS and %COPS command
1168
1169 <srcId>: Source Id
1170 <mode>: registration mode.
1171 <format>: format of operator selection
1172 <oper>: operator string
1173 <cmd>: command
1174 */
1175
1176 GLOBAL T_ACI_RETURN sat_Plus_Percent_COPS ( T_ACI_CMD_SRC srcId,
1177 T_ACI_COPS_MOD mode,
1178 T_ACI_COPS_FRMT format,
1179 CHAR * oper,
1180 T_ACI_AT_CMD cmd)
1181 {
1182 T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */
1183
1184
1185 T_ACI_NRG_RGMD regMode; /*NRG Registration mode */
1186 T_ACI_NRG_FRMT regFormat;
1187 T_ACI_NRG_SVMD svrMode;
1188
1189
1190 TRACE_FUNCTION ("sat_Plus_Percent_COPS()");
1191
1192
1193 pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
1194 mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode;
1195
1196 /*
1197 * check MM entity status
1198 */
1199 if( mmEntStat.curCmd NEQ AT_CMD_NONE )
1200
1201 return( AT_BUSY );
1202
1203
1204 /*
1205 *convert format to NRG type and set the COPS format value.
1206 */
1207
1208
1209 if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt;
1210
1211
1212 switch( format )
1213 {
1214 case( COPS_FRMT_NotPresent):
1215 regFormat = NRG_FRMT_NotPresent;
1216 break;
1217 case( COPS_FRMT_Numeric ):
1218 regFormat =NRG_FRMT_Numeric ;
1219 break;
1220 case( COPS_FRMT_Short):
1221 regFormat = NRG_FRMT_Short;
1222 break;
1223 case( COPS_FRMT_Long):
1224 regFormat = NRG_FRMT_Long;
1225 break;
1226 default:
1227 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1228 return( AT_FAIL );
1229 }
1230
1231 pMMCmdPrm -> COPSfrmt = format;
1232
1233
1234
1235 /*
1236 * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required.
1237 * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(), is set.
1238 */
1239
1240
1241 if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode;
1242
1243 switch( mode )
1244 {
1245 case( COPS_MOD_NotPresent ):
1246 regMode = NRG_RGMD_NotPresent;
1247 svrMode = NRG_SVMD_NotPresent;
1248 break;
1249 case( COPS_MOD_Auto ):
1250 regMode =NRG_RGMD_Auto ;
1251 svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for Automatic Mode */
1252 break;
1253 case( COPS_MOD_Man):
1254 regMode = NRG_RGMD_Manual;
1255 svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for Manual Mode */
1256 break;
1257 case( COPS_MOD_Dereg):
1258 regMode = NRG_RGMD_Dereg;
1259 svrMode = NRG_SVMD_Limited;
1260 break;
1261 case( COPS_MOD_Both ):
1262 regMode = NRG_RGMD_Both;
1263 svrMode = NRG_SVMD_Full; /* Only Full Service makes sense for the Both Mode */
1264 break;
1265 case(COPS_MOD_SetOnly): /*This mode can be fully handled in this function */
1266 /* DO NOT SET mmShrdPrm.COPSmode !!! */
1267 pMMCmdPrm -> COPSfrmt = format;
1268 return AT_CMPL;
1269 default:
1270 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1271 return( AT_FAIL );
1272 }
1273
1274 mmShrdPrm.COPSmode = mode;
1275
1276
1277
1278 /*Set the value of the current command executed */
1279 mmEntStat.curCmd = cmd;
1280
1281 return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper);
1282
1283 }
1284 #ifdef TI_PS_FF_AT_P_CMD_CTREG
1285 /*
1286 +--------------------------------------------------------------------+
1287 | PROJECT : GSM-PS (6147) MODULE : CMH_MMS |
1288 | STATE : code ROUTINE : sAT_PercentCTREG |
1289 +--------------------------------------------------------------------+
1290
1291 PURPOSE : This is the functional counterpart to the %CTREG AT command
1292 which will update the two tables present in common shared
1293 location.
1294
1295 */
1296
1297 GLOBAL T_ACI_RETURN sAT_PercentCTREG ( T_ACI_CMD_SRC srcId, T_TREG *treg )
1298 {
1299 BOOL ret;
1300
1301 TRACE_FUNCTION ("sAT_PercentCTREG()");
1302
1303 /*
1304 *-------------------------------------------------------------------
1305 * check command source
1306 *-------------------------------------------------------------------
1307 */
1308 if(!cmh_IsVldCmdSrc (srcId))
1309 {
1310 TRACE_EVENT_P1("sAT_PercentCTREG(): Invalid source: %d", srcId);
1311 ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
1312 return( AT_FAIL );
1313 }
1314
1315 ret = cl_shrd_set_treg_val(treg);
1316
1317 if(ret EQ TRUE)
1318 {
1319 return( AT_CMPL );
1320 }
1321 return(AT_FAIL);
1322 }
1323 #endif /* TI_PS_FF_AT_P_CMD_CTREG */
1324
1325 /*==== EOF ========================================================*/