--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/condat/com/include/custom.h	Fri Oct 16 06:23:26 2020 +0000
@@ -0,0 +1,592 @@
+/*
++-----------------------------------------------------------------------------
+|  Project :  GSM-PS (6147)
+|  Modul   :  CUSTOM
++-----------------------------------------------------------------------------
+|  Copyright 2002 Texas Instruments Berlin, AG
+|                 All rights reserved.
+|
+|                 This file is confidential and a trade secret of Texas
+|                 Instruments Berlin, AG
+|                 The receipt of or possession of this file does not convey
+|                 any rights to reproduce or disclose its contents or to
+|                 manufacture, use, or sell anything it may describe, in
+|                 whole, or in part, without the specific written consent of
+|                 Texas Instruments Berlin, AG.
++-----------------------------------------------------------------------------
+|  Purpose :  Custom dependent definitions
+|
+|             Use this header for definitions to integrate the
+|             protocol stack in your target system !
++-----------------------------------------------------------------------------
+*/
+
+#ifndef CUSTOM_H
+#define CUSTOM_H
+
+/*
+ * OPTION_MULTITHREAD
+ *
+ * Description :  For Operationg systems where the entire protocol
+ *                stack is linked as an process and the entitys are
+ *                started as threads, this option must be set. In
+ *                this case all the pei_ functions of one entity
+ *                were prefixed by the entity name like cc_pei...
+ *
+ * Options:       #define OPTION_MULTITHREAD
+ *                                       Multithread application
+ *                #undef  OPTION_MULTITHREAD
+ *                                       No multithread application.
+ *                                       Each entity is linked seperatly.
+ *
+ */
+/*
+#undef OPTION_MULTITHREAD must be passed as compile switch
+*/
+/*==== ENTITY DEPENDENT CONFIGURATION PARAMETER ===================*/
+
+#ifndef __PFRAME_C__ /* do not include the entity specific custom
+                        header if we compile the frame */
+
+#ifdef ENTITY_CST
+#include "cst/cus_cst.h"
+#endif
+
+#if defined (ENTITY_SMI) || defined (ENTITY_MFW) || defined (ENTITY_ACI) || defined (ENTITY_MMI)
+#include "cus_aci.h"
+#endif
+
+#ifdef ENTITY_PAN
+#endif
+
+#ifdef ENTITY_DL
+#include "cus_dl.h"
+#endif
+
+#ifdef ENTITY_RR
+#include "cus_rr.h"
+#endif
+
+#ifdef ENTITY_MM
+#include "cus_mm.h"
+#endif
+
+#ifdef ENTITY_CC
+#include "cus_cc.h"
+#endif
+
+#ifdef ENTITY_SS
+#include "cus_ss.h"
+#endif
+
+#ifdef ENTITY_ESIM
+#include "cus_esim.h"
+#endif
+
+#ifdef ENTITY_SMS
+#include "cus_sms.h"
+#endif
+
+#ifdef ENTITY_PL
+  #ifdef ALR
+    #include "cus_alr.h"
+  #else
+    #include "cus_til.h"
+  #endif
+#endif
+
+#ifdef ENTITY_L1
+#include "cus_l1.h"
+#endif
+
+#ifdef ENTITY_SIM
+#include "cus_sim.h"
+#endif
+
+#ifdef ENTITY_L2R
+#include "cus_l2r.h"
+#endif
+
+#ifdef ENTITY_RLP
+#include "cus_rlp.h"
+#endif
+
+#ifdef ENTITY_T30
+#include "cus_t30.h"
+#endif
+
+#ifdef ENTITY_FAD
+#include "cus_fad.h"
+#endif
+
+#ifdef ENTITY_RA
+#include "cus_ra.h"
+#endif
+
+#ifdef ENTITY_WAP
+#ifdef FF_GPF_TCPIP
+#include "cus_wapmic.h"
+#endif
+#ifdef CO_UDP_IP
+#include "cus_wap.h"
+#endif
+#endif
+
+#ifdef ENTITY_UDP
+#include "cus_udp.h"
+#endif
+
+#ifdef ENTITY_IP
+#include "cus_ip.h"
+#endif
+
+#ifdef ENTITY_TCP
+#include "cus_tcp.h"
+#endif
+
+#endif
+
+/*==== ENTITY NAMES ===============================================*/
+/*
+ *  The names are used as identifier for the communication resource
+ */
+
+#define NULL_NAME     "NULL"
+#define L1_NAME       "L1"
+#define PL_NAME       "PL"
+#define DL_NAME       "DL"
+#define RR_NAME       "RR"
+#define MM_NAME       "MM"
+#define CC_NAME       "CC"
+#define SS_NAME       "SS"
+#define ESIM_NAME       "ESIM"
+#define SMS_NAME      "SMS"
+#define SIM_NAME      "SIM"
+#define PAN_NAME      "PAN"
+#define DMYA_NAME     "DMYA"
+#define DMYB_NAME     "DMYB"
+#define CST_NAME      "CST"
+#define GRR_NAME      "GRR"
+
+#define ACI_NAME      "MMI"
+#define AAA_NAME      "AAA"
+#define RIV_NAME      "RIV"
+
+#define L2R_NAME      "L2R"
+#define TRA_NAME      L2R_NAME  /* TRA running in L2R task */
+#define RLP_NAME      "RLP"
+#define T30_NAME      "T30"
+#define FAD_NAME      "FAD"
+#define RA_NAME       "RA"
+#define WAP_NAME      "WAP"
+#define UDP_NAME      "UDP"
+#define IP_NAME       "IP"
+#define PPP_NAME      "PPP"
+#define UART_NAME     "UART"
+#define PSI_NAME      "PSI"
+#define DTI_NAME      "DTI"
+#define TAP_NAME      "TAP"
+#define BTI_NAME      "BTI"   /* BTI is not an entity, but the name is used to identify BTI */
+#define LC_NAME       "LC"
+
+
+#ifndef _TARGET_
+  #define CLT_NAME    "CLT"   /* Used only during Simulation testing*/
+#endif /*!_TARGET_*/
+
+#define RRLP_NAME     "RRLP"
+
+
+#ifdef FF_TRACE_OVER_MTST
+#define MTST_NAME     "MTST"
+#endif /* FF_TRACE_OVER_MTST */
+
+#ifdef GPRS
+#define GMM_NAME      "GMM"
+#define GRR_NAME      "GRR"
+#define GRLC_NAME     "GRLC"
+#define PKTIO_NAME    "PKT"
+#define GPL_NAME      "GRR"
+#endif /* #ifdef GPRS */
+
+#define DCM_NAME      "MMI"
+#define TCPIP_NAME    "TCP"
+
+#define APP_NAME      "APP"
+#define GDD_DIO_NAME  "GDDI"
+
+#ifndef NEW_FRAME
+/*==== STATIC CONFIGURATION =======================================*/
+/*
+ * TRACE_FKT
+ *
+ * Description :  A trace string is send to the environment when a
+ *                function is called.
+ *
+ * Options:       #define TRACE_FKT     configuration is active
+ *                #undef  TRACE_FKT     configuration is not active
+ *                #define TC_FUNC  <n>  used trace class
+ *
+ * Function Traces only under Windows and for MMI
+ */
+
+/*
+ * It is nearly impossible to debug ACI/MFW/SMI without function traces
+ */
+#if defined(WIN32) OR defined(ENTITY_MFW) OR defined(ENTITY_ACI) OR defined(ENTITY_SMI)
+#define  TRACE_FKT
+#define TC_FUNC             1
+#else
+#undef TRACE_FKT
+#endif
+
+/*
+ * TRACE_EVE
+ *
+ * Description :  A trace string is given to the environment when
+ *                an event has happened, for example start of cell
+ *                selection.
+ *
+ * Options:       #define TRACE_EVE     configuration is active
+ *                #undef  TRACE_EVE     configuration is not active
+ *                #define TC_EVENT  <n> used trace class
+ */
+
+#if !defined (NTRACE)
+#define TRACE_EVE
+#define TC_EVENT           2
+#else
+#undef TRACE_EVE
+#endif
+
+/*
+ * TRACE_ERR
+ *
+ * valid for   :  Mobile and Base Station
+ *
+ * Description :  A trace string is given to the environment when
+ *                an error has occured, for example parameter error
+ *                by dynamic configuration.
+ *
+ * Options:       #define TRACE_ERR     configuration is active
+ *                #undef  TRACE_ERR     configuration is not active
+ *                #define TC_ERROR  <n> used trace class
+ */
+
+#if !defined (NTRACE)
+#define TRACE_ERR
+#define TC_ERROR           3
+#else
+#undef TRACE_ERR
+#endif
+
+/*
+ * TRACE_PRIM
+ *
+ * Description :  A trace string is send to the environment when a
+ *                primitive is received or send.
+ *
+ * Options:       #define TRACE_PRIM     configuration is active
+ *                #undef  TRACE_PRIM     configuration is not active
+ *                #define TC_PRIM   <n>  used trace class
+ */
+
+#if !defined (NTRACE)
+#define TRACE_PRIM
+#define TC_PRIM            4
+#else
+#undef TRACE_PRIM
+#endif
+
+/*
+ * TRACE_STATE
+ *
+ * Description :  A trace string is send to the environment when a
+ *                state variable is changed or retrieved.
+ *
+ * Options:       #define TRACE_STATE     configuration is active
+ *                #undef  TRACE_STATE     configuration is not active
+ *                #define TC_STATE   <n>  used trace class
+ */
+
+#if !defined (NTRACE)
+#define TRACE_STATE
+#define TC_STATE           8
+#else
+#undef TRACE_STATE
+#endif
+
+#endif /* NEW_FRAME */
+
+/*
+ * SIM Application Toolkit
+ *
+ * Description :  Depending of the general activation of SIM application
+ *                Toolkit, specific parts can be activated
+ *
+ * Options:       #define SAT_CBM_DNL_SUPPORT   Cell Broadcast Data
+ *                                              Download shall be supported
+ *                #define SAT_SMS_DNL_SUPPORT   SMS Data Download shall
+ *                                              be supported
+ *                #define SAT_CALL_CTRL_SUPPORT Call Control by SIM shall
+ *                                              be supported
+ *                #define SAT_CALL_REQ_SUPPORT  Setup Call and Send SS/USSD
+ *                                              shall be supported
+ */
+
+#ifdef SIM_TOOLKIT
+#define SAT_CBM_DNL_SUPPORT
+#define SAT_SMS_DNL_SUPPORT
+#define SAT_CALL_CTRL_SUPPORT
+#define SAT_CALL_REQ_SUPPORT
+#endif
+
+/*
+ * Engineering Mode
+ *
+ * Description :  The configuration enables feature flag for engineering mode under WIN32.
+ *
+ * Options:       #define FF_EM_MODE       engineering mode is supported
+ *
+ */
+
+//#if defined (WIN32)
+//#define FF_EM_MODE
+//#endif
+
+/*
+ * OPTION_REF
+ *
+ * Description :  There are two ways defined to communicate
+ *                between protocol stack entities. Either by
+ *                copying buffers or by exchanging buffer
+ *                addresses. This options defines which
+ *                way is used.
+ *
+ * Options:       #define OPTION_REF    communication is
+ *                                      carried out by
+ *                                      exchanging buffer addresses
+ *                #undef  OPTION_REF    communication is
+ *                                      carried out by
+ *                                      copying buffers
+ */
+
+#define OPTION_REF
+
+/*
+ * OPTION_LENGTH
+ *
+ * Description :  If the communication is carried out by
+ *                exchanging buffer addresses it is not
+ *                necessary to calculate the length of
+ *                the buffer. This option suppresses
+ *                the calculation of the size parameter
+ *                of the sending communication buffer.
+ *
+ * Options:       #undef  OPTION_LENGTH  size parameter is set
+ *                                       to zero.
+ *                #define OPTION_LENGTH  size parameter is set
+ *                                       to buffer size
+ */
+
+#define OPTION_LENGTH
+
+/*
+ * OPTION_SET_CONFIG_ONLY
+ *
+ * Description :  The pei_config () function is used
+ *                to set and/or to read dynamic configuration.
+ *                The possibility to read a dynamic configuration
+ *                is switched off by this configuration.
+ *
+ * Options:       #define OPTION_SET_CONFIG_ONLY
+ *                                       It is not possible to read
+ *                                       a dynamic configuration
+ *                #undef  OPTION_SET_CONFIG_ONLY
+ *                                       It is possible to read
+ *                                       a dynamic configuration
+ */
+
+#define OPTION_SET_CONFIG_ONLY
+
+/*
+ * OPTION_GSM_ONLY
+ *
+ * Description :  If the environment ensures that only GSM
+ *                primitives are forwarded to the protocol
+ *                stack entity this option suppresses the
+ *                use of the vsi_c_primitive() function.
+ *
+ * Options:       #define OPTION_GSM_ONLY
+ *                                       The environment sends
+ *                                       only GSM primitives
+ *                #undef  OPTION_GSM_ONLY
+ *                                       The environment sends
+ *                                       GSM and SYSTEM primitives
+ */
+
+#undef OPTION_GSM_ONLY
+
+/*
+ * OPTION_TIMEOUT_SYNC
+ *
+ * Description :  If the environment ensures that the
+ *                pei_primitive and pei_timeout function
+ *                not called at the same time this option
+ *                suppresses the use of the vsi_c_awake()
+ *                function. The timeout-handling is started
+ *                directly by the pei_timeout() function.
+ *
+ * Options:       #define OPTION_TIMOUT_SYNC
+ *                                       direct timeout-handling
+ *                #undef  OPTION_TIMEOUT_SYNC
+ *                                       indirect timeout-handling
+ *                                       by using vsi_c_awake ()
+ */
+
+#undef OPTION_TIMEOUT_SYNC
+
+/*
+ * OPTION_SIGNAL
+ *
+ * Description :  The options defines whether signal processing
+ *                in the entity is possible or not.
+ *
+ * Options:       #define OPTION_SIGNAL
+ *                                       Signal processing is possible
+ *                #undef  OPTION_SIGNAL
+ *                                       Signal processing is not possible
+ *
+ */
+
+#define OPTION_SIGNAL
+
+/*
+ * OPTION_TIMER
+ *
+ * Description :  The options defines whether timer values are
+ *                changeable by dynamic configuration or not.
+ *
+ * Options:       #define OPTION_TIMER
+ *                                       Timer values are changeable
+ *                #undef  OPTION_TIMER
+ *                                       Timer values are not
+ *                                       changeable
+ */
+
+#if !defined (NCONFIG)
+#define OPTION_TIMER
+#else
+#undef OPTION_TIMER
+#endif
+
+/*
+ * OPTION_RELATIVE
+ *
+ * Description :  If the compiler for the target system
+ *                uses relative addressing it is possible
+ *                that the offset at run-time must be
+ *                added to some jump tables containing only
+ *                the offset at compile-time.
+ *
+ * Options:       #define OPTION_RELATIVE
+ *                                       add run-time offset
+ *                #undef  OPTION_RELATIVE
+ *                                       don't add run-time offset
+ */
+
+#undef OPTION_RELATIVE
+
+/*
+ * OPTION_MULTI_INSTANCE
+ * MAX_INSTANCES
+ *
+ *
+ * Description :  The option is used if multiple instances are
+ *                used. The routing information is stored in the
+ *                header (T_ROUTE route). The routing information
+ *                consists of instance number (inst_no),
+ *                channel number (chan_no) and timeslot number
+ *                (ts_no). The upper layer uses instance number
+ *                for routing, at the interface to physical layer
+ *                the channel and timeslot number are used. The
+ *                constant MAX_INSTANCES defines the maximum of
+ *                instances.
+ *
+ * Options:       #define OPTION_MULTI_INSTANCE
+ *                                       use multi instances
+ *                #undef  OPTION_MULTI_INSTANCE
+ *                                       only one instance
+ */
+
+#undef OPTION_MULTI_INSTANCE
+#define MAX_INSTANCES      1
+
+/*==== TYPES ======================================================*/
+/*
+ * T_PRIM_HEADER
+ *
+ * Description :  This type definition defines the custom specific
+ *                part of a primitive. All primitives have the
+ *                general format: header followed by data. The
+ *                header of a primitive is changeable according to
+ *                the requirements of the target system.
+ * Hints:         Only the operation code opc as a USHORT value must
+ *                be present. For multi-instance protocol stacks
+ *                the routing information must be include in the
+ *                header (T_ROUTE route).
+ */
+
+#ifdef OPTION_MULTI_INSTANCES
+
+typedef struct
+{
+  USHORT  inst_no;
+  USHORT  chan_no;
+  UBYTE   ts_no;
+} T_ROUTE;
+
+#endif
+
+#if !defined (T_PRIM_HEADER_DEFINED)
+
+#define T_PRIM_HEADER_DEFINED
+
+#ifdef _TMS470
+
+typedef struct
+{
+   USHORT opc;         /* equal to int SignalCode */
+   USHORT opc2;
+   USHORT len;
+   USHORT idx;
+   T_sdu *sdu;
+   UBYTE * Sender;     /* not used                */
+   UBYTE * SigP;       /* Pointer to data area    */
+} T_PRIM_HEADER;
+
+#else
+
+typedef struct
+{
+   UBYTE  ps;
+   UBYTE  fill;
+   UBYTE  snd;
+   UBYTE  rcv;
+   ULONG  timestamp;
+   USHORT len;
+   USHORT idx;
+   T_sdu *sdu;
+   USHORT lng;
+#ifdef OPTION_MULTI_INSTANCES
+   T_ROUTE route;
+#endif
+   USHORT opc;
+   USHORT opc2;
+} T_PRIM_HEADER;
+
+#endif
+
+#endif /* T_PRIM_HEADER_DEFINED */
+
+#endif /* CUSTOM_H */