diff src/g23m-aci/aci/cmh_mms.c @ 1:fa8dc04885d8

src/g23m-*: import from Magnetite
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 16 Oct 2020 06:25:50 +0000
parents
children
line wrap: on
line diff
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/g23m-aci/aci/cmh_mms.c	Fri Oct 16 06:25:50 2020 +0000
@@ -0,0 +1,1325 @@
+/* 
++----------------------------------------------------------------------------- 
+|  Project :  GSM-PS (6147)
+|  Modul   :  CMH_MMS
++----------------------------------------------------------------------------- 
+|  Copyright 2002 Texas Instruments Berlin, AG 
+|                 All rights reserved. 
+| 
+|                 This file is confidential and a trade secret of Texas 
+|                 Instruments Berlin, AG 
+|                 The receipt of or possession of this file does not convey 
+|                 any rights to reproduce or disclose its contents or to 
+|                 manufacture, use, or sell anything it may describe, in 
+|                 whole, or in part, without the specific written consent of 
+|                 Texas Instruments Berlin, AG. 
++----------------------------------------------------------------------------- 
+|  Purpose :  This module provides the set functions related to the
+|             protocol stack adapter for mobility management.
++----------------------------------------------------------------------------- 
+*/ 
+
+#ifndef CMH_MMS_C
+#define CMH_MMS_C
+#endif
+
+#include "aci_all.h"
+
+/*==== INCLUDES ===================================================*/
+#include "aci_cmh.h"
+
+#include "rtc.h"
+
+#ifdef DTI
+#include "dti.h"      /* functionality of the dti library */
+#include "dti_conn_mng.h"
+#endif
+
+#include "aci_mem.h"
+
+#ifdef FAX_AND_DATA
+/* #include "aci_fd.h" */
+#endif    /* of #ifdef FAX_AND_DATA */
+
+#include "psa.h"
+#include "psa_sim.h"
+#include "psa_mm.h"
+#include "cmh.h"
+#include "cmh_sim.h"
+#include "cmh_mm.h"
+
+#include "psa_cc.h"
+#include "cmh_cc.h"
+
+#ifdef GPRS
+  #include "gaci.h"
+  #include "gaci_cmh.h"
+  #include "psa_gmm.h"
+  #include "cmh_gmm.h"
+#endif
+
+#ifndef _SIMULATION_
+/***************************/
+/* TEMPORARY until NVM     */
+/* just to get FFs !!!! */
+#ifndef GPRS
+#define DONT_LET_FFSH_DEF_GPRS
+#endif
+
+#include "ffs/ffs.h"
+
+#include "rx.h"
+
+#include "rtc.h"
+
+#ifdef FF_TIMEZONE
+#include "rv/rv_general.h"
+#include "rtc/rtc_tz.h"
+#endif
+
+/* check whether latter has defined GPRS !!! */
+#ifdef DONT_LET_FFSH_DEF_GPRS
+#undef GPRS
+#endif
+
+#undef DONT_LET_FFSH_DEF_GPRS
+/***************************/
+#endif /* _SIMULATION_ */
+
+
+/*==== CONSTANTS ==================================================*/
+
+/*==== EXPORT =====================================================*/
+
+/*==== VARIABLES ==================================================*/
+
+/*==== FUNCTIONS ==================================================*/
+EXTERN void wake_up_rr (void);
+
+#ifdef TI_PS_FF_AT_P_CMD_CTREG
+EXTERN BOOL cl_shrd_set_treg_val(T_TREG *treg);
+#endif /* TI_PS_FF_AT_P_CMD_CTREG */
+
+#ifndef _SIMULATION_
+LOCAL void rx_Cb (drv_SignalID_Type *signal_params);
+LOCAL UCHAR rx_sequence_Cb (void* arg);
+#endif /* _SIMULATION_ */
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentBAND          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %BAND AT command
+            which is responsible for configuring the way the mobile
+            deals with multiband.
+
+            <bandMode>: band switch mode.
+            <bandType>: band selection by user: coded in bitfield as following.            
+            Bit set to 1 if band is set, 0 otherwise...
+       
+     BITS:  |    5   |   4   |    3    |    2    |    1   |      
+            | GSM850 | E_GSM | GSM1900 | GSM1800 | GSM900 |
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentBAND(T_ACI_CMD_SRC   srcId,
+                                    T_ACI_BAND_MODE bandMode,
+                                    UBYTE           bandType)
+{
+  UBYTE ManufacturerBands;
+  UBYTE ubyte_dummy;
+
+  TRACE_FUNCTION("sAT_PercentBAND()");
+
+  /* check command source */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    return( AT_FAIL );
+  }
+
+  /* Check Parameter bandMode */
+  switch( bandMode )
+  {
+  case( BAND_MODE_Auto ):
+    bandType = 0x00;    /* scan all */
+    break;
+
+  case( BAND_MODE_Manual ):
+    /* Check Parameter bandType */
+    if(cmhMM_getBandSettings(&ubyte_dummy, &ManufacturerBands))
+    {
+      TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS successful");
+    }
+    else
+    {
+      TRACE_FUNCTION("cmhMM_getBandSettings: data reading from FFS failed");
+    }
+
+
+    if( !cmhMM_isBandAllowed(bandType, ManufacturerBands) )
+    {
+      TRACE_EVENT_P1("Band combination %d is not supported by this hardware", bandType);
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+    break;
+  
+  default:
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  if( !cmhMM_writeSetBand(bandType) )
+    return(AT_FAIL);
+
+  /* switch off radio */
+  if( CFUNfun EQ CFUN_FUN_Full )
+  {
+    /* if mobile is on, proceed a soft switch off
+     and then switch back on */
+    mmEntStat.curCmd = AT_CMD_BAND;
+
+    return( sAT_PlusCFUN( srcId,
+                          CFUN_FUN_Disable_TX_RX_RF,
+                          CFUN_RST_NotPresent) );
+  }
+  else
+  {
+    /* new configuration has been written to Flash and that's it ! */
+    return( AT_CMPL);
+  }
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PlusCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +COPS AT command
+            which is responsible for selection and deselection of an
+            network operator.
+
+            <mode>:   registration mode.
+            <format>: format of operator selection
+            <oper>:   operator string
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusCOPS ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_COPS_MOD mode,
+                                   T_ACI_COPS_FRMT format,
+                                   CHAR * oper )
+{
+  return(sat_Plus_Percent_COPS(srcId,
+                               mode,
+                               format,
+                               oper,
+                               AT_CMD_COPS));
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %COPS AT command
+            which is responsible for selection and deselection of an
+            network operator. %COPS will add, in principle, 
+            the following functionality to the standard AT command +COPS: 
+           
+            -Possibility to query the "service status" in which the phone is currently registered; 
+              the possible values will be "full service", "limited service" or  "no service".
+            -Possibility to select the "last registered" operator using  %COPS=1. 
+
+
+            <mode>:   registration mode.
+            <format>: format of operator selection
+            <oper>:   operator string
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCOPS ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_COPS_MOD mode,
+                                   T_ACI_COPS_FRMT format,
+                                   CHAR * oper )
+{
+  return(sat_Plus_Percent_COPS(srcId,
+                               mode,
+                               format,
+                               oper,
+                               AT_CMD_P_COPS));
+}
+
+#ifdef TI_PS_FF_AT_CMD_WS46
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PlusWS46             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +WS46 AT
+            command which is responsible to select wireless network.
+
+            <mode>: network mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusWS46   (T_ACI_CMD_SRC srcId,
+                                    T_ACI_WS46_MOD mode )
+{
+
+  TRACE_FUNCTION ("sAT_PlusWS46()");
+
+/*
+ *-------------------------------------------------------------------
+ * process the value parameter
+ *-------------------------------------------------------------------
+ */
+  if( mode NEQ ACI_NumParmNotPresent )
+  {
+    if( mode NEQ WS46_MOD_Gsm )
+    {
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+    }
+  }
+
+  return( AT_CMPL );
+}
+#endif /* TI_PS_FF_AT_CMD_WS46 */
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : tAT_PercentALS           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %ALS AT command
+            which is responsible for testing if ALS mode is present.
+            (always if an E-Plus Sim-card is detected or the if the CSP
+            field is present on the inserted Sim-card and enables
+            ALS mode).
+
+            
+*/
+GLOBAL T_ACI_RETURN tAT_PercentALS  ( T_ACI_CMD_SRC srcId, T_ACI_ALS_MOD *ALSmode )
+
+{ 
+  TRACE_FUNCTION ("tAT_PercentALS()");
+
+  if( !cmh_IsVldCmdSrc( srcId ) )
+  {
+    return( AT_FAIL );
+  }
+
+#if defined(FF_BAT) && defined(_SIMULATION_)
+  /* test command %ALS is not used anymore by BAT.lib, change CMD MODE only for host tests */
+  if(aci_cmd_src_mode_get(srcId) EQ CMD_MODE_BAT)
+  {
+    aci_cmd_src_mode_set((UBYTE)srcId, CMD_MODE_ATI);
+  }
+#endif /* FF_BAT && _SIMULATION_ */  
+
+  /* E-Plus SIM-Card inserted (mcc=0x262, mnc=0x03) ? */
+  if (cmhSIM_plmn_is_hplmn(0x262, 0x03F))
+  {
+    *ALSmode = (T_ACI_ALS_MOD)(ALS_MOD_SPEECH | ALS_MOD_AUX_SPEECH);
+    return (AT_CMPL);
+  }
+
+  simEntStat.curCmd = AT_CMD_ALS;
+  simShrdPrm.owner = (T_OWN)srcId; 
+  simEntStat.entOwn =  srcId;
+
+  ccShrdPrm.als_cmd = ALS_CMD_TEST;
+  *ALSmode = ALS_MOD_NOTPRESENT;
+
+  cmhCC_checkALS_Support();
+  return (AT_EXCT);
+}
+
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentNRG           |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %NRG AT command
+            which is responsible for the setting of registration mode
+            and service mode.
+
+            <regMode>: registration mode.
+            <srvMode>: service mode.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentNRG( T_ACI_CMD_SRC  srcId,
+                                    T_ACI_NRG_RGMD regMode,
+                                    T_ACI_NRG_SVMD srvMode,
+                                    T_ACI_NRG_FRMT oprFrmt,
+                                    CHAR          *opr)
+{
+  T_MM_CMD_PRM * pMMCmdPrm;  /* points to MM command parameters */
+
+ 
+  TRACE_FUNCTION ("sAT_PercentNRG()");
+
+
+  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
+
+/*
+ *-------------------------------------------------------------------
+ * check MM entity status
+ *-------------------------------------------------------------------
+ */
+  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+
+    return( AT_BUSY );
+
+
+
+
+ /*
+ *-------------------------------------------------------------------
+ * process the oprFrmt,svrMode and regMode parameters
+ *-------------------------------------------------------------------
+ */
+  switch( oprFrmt )
+  {
+    case( NRG_FRMT_NotPresent ):
+      oprFrmt = pMMCmdPrm -> NRGoprFrmt;
+      break;
+    case( NRG_FRMT_Long  ):
+    case( NRG_FRMT_Short ):
+    case( NRG_FRMT_Numeric ):
+      break;
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }   
+
+  if( srvMode EQ NRG_SVMD_NotPresent ) 
+    srvMode=(T_ACI_NRG_SVMD)pMMCmdPrm->NRGregMode;
+
+  if( regMode EQ NRG_RGMD_NotPresent ) 
+    regMode=pMMCmdPrm->NRGregMode;
+
+
+
+/* Set the value of the current command executed */
+  mmEntStat.curCmd  = AT_CMD_NRG;  
+
+
+  return cmhMM_OperatorSelect(srcId,regMode,srvMode,oprFrmt,opr);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                  |
+| STATE   : code                    ROUTINE : sAT_PercentCSQ             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function for Signal Quality 
+  Param:
+  srcId:    command ID;
+  CSQmode:  enable(1) or disable(0) CSQ
+
+  Shen,Chao
+  Juni.13th, 2003
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCSQ( T_ACI_CMD_SRC  srcId,
+                                    T_ACI_CSQ_MODE CSQmode)
+{
+
+  T_MM_CMD_PRM  * pMMCmdPrm;  /* points to MM command parameters */
+
+  if( !cmh_IsVldCmdSrc( srcId ) )
+  {
+    return( AT_FAIL );
+  }
+
+  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+
+  switch(CSQmode)
+  {
+    case( CSQ_Enable):
+    {
+      if ( pMMCmdPrm->CSQworkStat EQ CSQ_Enable )
+      {
+        TRACE_EVENT("CSQ is already enabled");
+      }
+      else
+      {
+        cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Enable;
+        if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) AND
+            (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam NEQ CMER_INDICATOR_2) )
+        { /* rx_Init() not yet called from CIND service */
+#ifndef _SIMULATION_
+          rx_Init(rx_Cb);
+#endif /* _SIMULATION_ */
+        }
+      }
+      break;
+    }
+
+    case(CSQ_Disable):
+    {
+      if ( pMMCmdPrm->CSQworkStat EQ CSQ_Enable )
+      {
+        cmhPrm[srcId].mmCmdPrm.CSQworkStat = CSQ_Disable;
+        if( (pMMCmdPrm->sIndicationParam.sMmCINDSettings.sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) &&
+            (pMMCmdPrm->sIndicationParam.sMmCMERSettings.sCmerIndParam NEQ CMER_INDICATOR_2)  )
+        { /* CIND service inactive -> no more reading the signal strength necessary */
+#ifndef _SIMULATION_
+        rx_Init(NULL);
+#endif /* _SIMULATION_ */
+        }
+      }
+      break;
+    }
+    default:
+      return(AT_FAIL);
+  }
+  return( AT_CMPL);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                |
+| STATE   : code                    ROUTINE : sAT_Plus CIND          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function to setup the indications toward
+            terminal
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusCIND( T_ACI_CMD_SRC  srcId,
+                                       T_ACI_CIND_SIGNAL_TYPE  sCindSgnalSettings,
+                                       T_ACI_CIND_SMSFULL_TYPE sCindSmsFullSettings )
+{
+  T_ACI_MM_CIND_VAL_TYPE  *pMMCindPrm;
+  T_ACI_MM_CMER_VAL_TYPE  *pMMCmerPrm;
+  T_ACI_CIND_SIGNAL_TYPE   sOldSignalSetting;
+
+  TRACE_EVENT( "sAT_PlusCIND()" );
+
+  if( !cmh_IsVldCmdSrc( srcId ) )
+  {
+    return( AT_FAIL );
+  }
+
+  pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
+  pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
+
+  if( sCindSgnalSettings   EQ CIND_SIGNAL_INDICATOR_INVALID OR 
+      sCindSmsFullSettings EQ CIND_SMSFULL_INDICATOR_INVALID )
+  {
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  sOldSignalSetting = pMMCindPrm->sCindSignalParam;
+  pMMCindPrm->sCindSignalParam  = sCindSgnalSettings;
+  pMMCindPrm->sCindSmsFullParam = sCindSmsFullSettings;
+
+  /* ----------------- signal strength setting part ------------------------ */
+  if( sOldSignalSetting <= CIND_SIGNAL_INDICATOR_LVL0 )
+  { /* the old (previews) signal setting is off */
+    if( (sCindSgnalSettings > CIND_SIGNAL_INDICATOR_LVL0) AND 
+        (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND 
+        (pMMCmerPrm->sCmerIndParam NEQ CMER_INDICATOR_2) )
+    { /* greather LVL0 --> rx_Init must be initialize... */
+#ifndef _SIMULATION_
+      rx_Init(rx_Cb);
+#endif /* _SIMULATION_ */
+    }
+  }
+  else
+  { /* the old (previews) signal setting is on */
+    if( (sCindSgnalSettings EQ CIND_SIGNAL_INDICATOR_LVL0) AND
+        (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND
+        (pMMCmerPrm->sCmerIndParam NEQ CMER_INDICATOR_2) )
+    { /* LVL0 --> rx_Init must be reset... */
+#ifndef _SIMULATION_
+        rx_Init(NULL);
+#endif /* _SIMULATION_ */
+    }
+  }
+  return(AT_CMPL);
+}
+
+/* 
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                |
+| STATE   : code                    ROUTINE : sAT_Plus CMER          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the function to setup the buffer control for the 
+            indications toward terminal equipment
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusCMER( T_ACI_CMD_SRC  srcId,
+                                       T_ACI_CMER_MODE_TYPE sCmerModeSettings,
+                                       T_ACI_CMER_IND_TYPE sCmerIndicationSettings,
+                                       T_ACI_CMER_BFR_TYPE sCmerBfrSettings )
+{
+  T_ACI_MM_CMER_VAL_TYPE  *pMMCmerPrm;
+  T_ACI_MM_CIND_VAL_TYPE  *pMMCindPrm;
+  T_ACI_CMER_IND_TYPE      sOldCmerIndSetting;
+
+  TRACE_EVENT( "sAT_PlusCMER()" );
+
+  if( !cmh_IsVldCmdSrc( srcId ) )
+  {
+    return( AT_FAIL );
+  }
+
+  pMMCmerPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings);
+  pMMCindPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings);
+
+  sOldCmerIndSetting        = pMMCmerPrm->sCmerIndParam;
+  if( sCmerModeSettings NEQ CMER_MODE_INVALID )
+  {
+    pMMCmerPrm->sCmerModeParam = sCmerModeSettings;
+  }
+  if( sCmerIndicationSettings NEQ CMER_INDICATOR_INVALID )
+  {
+    pMMCmerPrm->sCmerIndParam  = sCmerIndicationSettings;
+  }
+  if( sCmerBfrSettings NEQ CMER_BFR_INVALID )
+  {
+    pMMCmerPrm->sCmerBfrParam  = sCmerBfrSettings;
+  }
+
+  /* ---------------- maybe switch on all indication settings ------------- */
+  if( sOldCmerIndSetting NEQ CMER_INDICATOR_2 )
+  { /* the old (previews) indicator setting is 'off' */
+    if( (sCmerIndicationSettings EQ CMER_INDICATOR_2) AND
+        (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND 
+        (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
+    { /* all indications must be show --> rx_Init must be initialize... */
+#ifndef _SIMULATION_
+      rx_Init(rx_Cb);
+#endif /* _SIMULATION_ */
+    }
+  }
+  else
+  { /* the old (previews) signal setting is on */
+    if( (sCmerIndicationSettings NEQ CMER_INDICATOR_2) AND
+        (cmhPrm[srcId].mmCmdPrm.CSQworkStat EQ CSQ_Disable) AND
+        (pMMCindPrm->sCindSignalParam <= CIND_SIGNAL_INDICATOR_LVL0) )
+    { /* LVL0 --> rx_Init must be reset... */
+#ifndef _SIMULATION_
+        rx_Init(NULL);
+#endif /* _SIMULATION_ */
+    }
+  }
+
+  return(AT_CMPL);
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI                 MODULE  : CMH_MMS                  |
+| STATE   : code                    ROUTINE : sAT_PercentCSQ             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the callback function for Signal Quality 
+  Param:
+  signal_params   callback function name
+
+  Shen,Chao
+  Juni.13th, 2003
+*/
+
+#ifndef _SIMULATION_
+LOCAL void rx_Cb (drv_SignalID_Type *signal_params)
+{
+    rx_Status_Type *para = NULL;
+
+    TRACE_EVENT("rx_Cb()");
+
+    ACI_MALLOC(para,sizeof(rx_Status_Type));
+
+    para->actLevel = ((rx_Status_Type *) signal_params->UserData)->actLevel;
+    para->gsmLevel = ((rx_Status_Type *) signal_params->UserData)->gsmLevel;
+    para->rxQuality = ((rx_Status_Type *) signal_params->UserData)->rxQuality;
+#ifdef FF_PS_RSSI
+    para->min_access_level = ((rx_Status_Type *) signal_params->UserData)->min_access_level;
+#endif
+        
+    if (!cmh_set_delayed_call (rx_sequence_Cb, (void *)para))
+    {
+      /* Implements Measure#32: Row 990  */
+      TRACE_EVENT("Error, can not set the delayed resequence callback for AT_CMD_CSQ");
+      ACI_MFREE(para);
+      return ;
+    }
+
+    TRACE_EVENT("delayed requence call back requested: 100 ms");
+    cmh_start_delayed_call (20);
+
+    return;   
+    
+}
+#endif /* _SIMULATION_ */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : ACI/MMI          MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCSQ             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the delayed callback function for Signal Quality 
+  Shen,Chao
+  Juni.13th, 2003
+*/
+#ifndef _SIMULATION_
+LOCAL UCHAR rx_sequence_Cb (void* arg)
+{
+  int  i;
+  UBYTE rssi;
+  UBYTE ber;
+#ifdef FF_PS_RSSI
+  UBYTE min_access_level;
+#endif
+  T_ACI_CIND_SIGNAL_TYPE sSignalStrength;
+  T_ACI_MM_CIND_VAL_TYPE sIndValues;
+
+  struct rx_Status_Type* tmp_p = (struct rx_Status_Type*) arg;
+  
+  TRACE_EVENT("rx_sequence_Cb()");
+
+  sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
+
+  if ( tmp_p->gsmLevel EQ 0xFF OR tmp_p->gsmLevel EQ 0 )
+  {
+    rssi = ACI_RSSI_FAULT;
+    sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
+  }
+  else if ( tmp_p->gsmLevel > 59 )
+  {
+    rssi = 31;
+  }
+  else
+  {
+    rssi = ( tmp_p->gsmLevel / 2 ) + 2;
+  }
+
+  if ( tmp_p->rxQuality EQ RX_QUAL_UNAVAILABLE )
+  {
+    ber = ACI_BER_FAULT;
+  }
+  else
+  {
+    ber = tmp_p->rxQuality;
+  }  
+
+#ifdef FF_PS_RSSI
+  if ( tmp_p->min_access_level EQ RX_ACCE_UNAVAILABLE)
+  {
+    min_access_level = ACI_MIN_RXLEV_FAULT;
+  }
+  else
+  {
+    min_access_level = tmp_p->min_access_level;
+  }
+#endif
+
+  for( i = CMD_SRC_LCL; i < CMD_SRC_MAX; i++)
+  {
+    if (cmhPrm[i].mmCmdPrm.CSQworkStat EQ CSQ_Enable)
+    {
+#ifdef FF_PS_RSSI
+      R_AT (RAT_CSQ, (T_ACI_CMD_SRC)i) (rssi, ber, tmp_p->actLevel, min_access_level);
+#else
+      R_AT (RAT_CSQ, (T_ACI_CMD_SRC)i) (rssi,ber,tmp_p->actLevel);
+#endif
+    }
+    /* ==================== process the service of +CIEV ========================== */
+    sSignalStrength = CIND_SIGNAL_INDICATOR_LVL0;
+    if( tmp_p->gsmLevel >= 11 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL1; };
+    if( tmp_p->gsmLevel >= 21 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL2; };
+    if( tmp_p->gsmLevel >= 32 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL3; };
+    if( tmp_p->gsmLevel >= 42 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL4; };
+    if( tmp_p->gsmLevel >= 52 ) { sSignalStrength = CIND_SIGNAL_INDICATOR_LVL5; };
+    sIndValues.sCindSignalParam = sSignalStrength;
+    sIndValues.sCindSmsFullParam = CIND_SMSFULL_INDICATOR_INVALID;
+    if( ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam > CIND_SIGNAL_INDICATOR_LVL0) AND
+         (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam >= sIndValues.sCindSignalParam) AND
+          (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam EQ CMER_INDICATOR_2)) OR 
+        ((cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCINDSettings.sCindSignalParam < sIndValues.sCindSignalParam) AND
+          (cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings.sCmerIndParam EQ CMER_INDICATOR_1)) )
+    {
+      TRACE_EVENT("send +CIEV");
+      R_AT (RAT_CIEV, (T_ACI_CMD_SRC)i) ( sIndValues, cmhPrm[i].mmCmdPrm.sIndicationParam.sMmCMERSettings );
+    }
+  }
+
+  if (!cmh_set_delayed_call (NULL, NULL))
+  { /* reset this callback pointer -> will be set again via rx_Cb */
+    /* Implements Measure#32: Row 991  */
+    TRACE_EVENT("Can not reset the delayed resequence callback for AT_CMD_CSQ");
+    return FALSE;
+  }
+  ACI_MFREE(tmp_p);
+
+  return TRUE;    
+}
+#endif /* _SIMULATION_ */
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCHPL          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CHPL AT command
+            which will return the list of entries in EF_HPLMNwAcT.
+
+            <mode>:   registration mode.
+            <format>: format of operator selection
+            <oper>:   operator string
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCHPL ( T_ACI_CMD_SRC srcId,
+                                      T_ACI_OPER_NTRY *oper )
+{
+  T_OPER_ENTRY   plmnDesc;
+  BOOL           found;
+  SHORT          mccBuf;
+  SHORT          mncBuf;
+
+  TRACE_FUNCTION ("sAT_PercentCHPL()");
+
+/*
+ *-------------------------------------------------------------------
+ * check whether SIM is ready 
+ *-------------------------------------------------------------------
+ */
+  if (!cmhSIM_CheckSimStatus ())
+  {
+    return AT_FAIL;
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PercentCHPL(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+  if(!cmhMM_GetActingHPLMN(&mccBuf, &mncBuf))/* Enhancement Acting HPLMN*/
+  {
+    cmhSIM_GetHomePLMN (&mccBuf, &mncBuf);
+  }
+
+  found = cmhMM_FindPLMN (&plmnDesc, mccBuf, mncBuf, NOT_PRESENT_16BIT, FALSE);
+  if (!found)
+  {
+    TRACE_EVENT_P2("sAT_PercentCHPL(): MCC/MN not found in database (0x%X, 0x%X", mccBuf, mncBuf);
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Internal);
+    return( AT_FAIL );
+  }
+
+  strcpy (oper->longName, plmnDesc.longName);
+  strcpy (oper->shrtName, plmnDesc.shrtName);
+  oper->mcc = plmnDesc.mcc;
+  oper->mnc = plmnDesc.mnc;
+  oper->pnn = plmnDesc.pnn;
+  oper->long_len = plmnDesc.long_len;
+  oper->shrt_len = plmnDesc.shrt_len;
+
+  return (AT_CMPL);
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PlusCTZR             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CTZR AT command
+            which will set the status of CTZRmode, indicating whether time
+            zone change rep[orting is enabled or disabled.
+
+            <on/off>:   Indicates whether time zone reporting is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusCTZR ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CTZR_MODE mode)
+{
+  TRACE_FUNCTION ("sAT_PlusCTZR()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the mode parameter
+ *-------------------------------------------------------------------
+ */
+  switch (mode)
+  {
+    case CTZR_MODE_OFF:
+    case CTZR_MODE_ON:
+       cmhPrm[srcId].mmCmdPrm.CTZRMode = mode;
+       break;
+
+    default:
+       TRACE_EVENT_P1("sAT_PlusCTZR(): Invalid mode: %d", mode);
+       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+       return( AT_FAIL );
+  }
+  
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PlusCTZU             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CTZU AT command
+            which will set the status of CTZUmode, indicating whether automatic time
+            zone update is enabled or disabled.
+
+            <on/off>:   Indicates whether automatic time zone update is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusCTZU ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CTZU_MODE mode)
+{
+  TRACE_FUNCTION ("sAT_PlusCTZU()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the mode parameter
+ *-------------------------------------------------------------------
+ */
+  switch (mode)
+  {
+    case CTZU_MODE_OFF:
+    case CTZU_MODE_ON:
+       cmhPrm[srcId].mmCmdPrm.CTZUMode = mode;
+       break;
+
+    default:
+       TRACE_EVENT_P1("sAT_PlusCTZU(): Invalid mode: %d", mode);
+       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+       return( AT_FAIL );
+  }
+  
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT :                       MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PlusCCLK             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CCLK AT command
+            which will set the real time clock of the ME
+*/
+
+GLOBAL T_ACI_RETURN sAT_PlusCCLK ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_RTC_DATE *date_s,
+                                   T_ACI_RTC_TIME *time_s,
+                                   int timeZone
+                                 )
+{
+#ifndef _SIMULATION_
+  UBYTE  ret;
+#endif /* _SIMULATION_ */
+
+  TRACE_FUNCTION ("sAT_PlusCCLK()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PlusCCLK(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * Set the time in the RTC 
+ *-------------------------------------------------------------------
+ */
+#ifndef _SIMULATION_
+  ret = rtc_set_time_date( (T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s);
+
+  switch (ret)
+  {
+    case 0:                     /* RVF_OK. Date and time set ok*/
+#ifndef FF_TIMEZONE
+      return( AT_CMPL );
+#else  /* FF_TIMEZONE */
+      ret = RTC_SetCurrentTZ((T_RTC_TZ)timeZone); /* Set current timezone now time and date are set.*/
+      switch (ret)
+      {
+        case 0:                /* RVF_OK. RTC current TZ set ok*/
+          return( AT_CMPL );
+
+        default:
+          TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR1: %d", ret);  /* RTC setting failed */
+          return( AT_FAIL );
+      }
+#endif /* FF_TIMEZONE */
+
+    default:     /* RVF_NOT_READY or RVF_INTERNAL ERROR or RVF_INVALID_PARAMETER */
+      TRACE_EVENT_P1("sAT_PlusCCLK(): ERROR2: %d", ret);  /* Date and time setting failed */
+      return( AT_FAIL );
+  }
+#else /* _SIMULATION_ */
+  return( AT_CMPL );
+#endif /* _SIMULATION_ */
+
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCTZV             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CTZV AT command
+            which will set the status of PCTZVmode, indicating whether time and date report
+            is enabled or disabled.
+
+            <on/off>:   Indicates whether time and date report is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCTZV ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_PCTZV_MODE mode)
+{
+  TRACE_FUNCTION ("sAT_PercentCTZV()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the mode parameter
+ *-------------------------------------------------------------------
+ */
+  switch (mode)
+  {
+    case PCTZV_MODE_OFF:
+    case PCTZV_MODE_ON:
+       cmhPrm[srcId].mmCmdPrm.PCTZVMode = mode;
+       break;
+
+    default:
+       TRACE_EVENT_P1("sAT_PercentCTZV(): Invalid mode: %d", mode);
+       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+       return( AT_FAIL );
+  }
+  
+  return( AT_CMPL );
+}
+
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCNIV                |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CNIV AT command
+            which will set the status of CNIVmode, indicating whether time and date report
+            is enabled or disabled.
+
+            <on/off>:   Indicates whether time and date report is enabled or disabled.
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCNIV ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_CNIV_MODE mode)
+{
+  TRACE_FUNCTION ("sAT_PercentCNIV()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * process the mode parameter
+ *-------------------------------------------------------------------
+ */
+  switch (mode)
+  {
+    case CNIV_MODE_OFF:
+    case CNIV_MODE_ON:
+       cmhPrm[srcId].mmCmdPrm.CNIVMode = mode;
+       break;
+
+    default:
+       TRACE_EVENT_P1("sAT_PercentCNIV(): Invalid mode: %d", mode);
+       ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+       return( AT_FAIL );
+  }
+  
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCWUP          |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the +CWUP AT command
+                   which will force RR to trigger a power campaign.
+
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCWUP ( T_ACI_CMD_SRC srcId, T_ACI_CWUP_TYPE type )
+{
+  TRACE_FUNCTION ("sAT_PercentCWUP()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PercentCWUP(): Invalid source: %d", srcId);
+    return( AT_FAIL );
+  }
+
+/*
+ *-------------------------------------------------------------------
+ * check entity status
+ *-------------------------------------------------------------------
+ */
+  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+  {
+    TRACE_EVENT("sAT_PercentCWUP(): MM is busy");    
+    return( AT_BUSY );
+  }
+
+  wake_up_rr();
+  
+  return( AT_CMPL );
+}
+
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PlusCOPS             |
++--------------------------------------------------------------------+
+
+  PURPOSE : This function encapsulates the functionality of +COPS and %COPS command
+             
+            <srcId>:  Source Id
+            <mode>:   registration mode.
+            <format>: format of operator selection
+            <oper>:   operator string
+            <cmd>:    command
+*/
+
+GLOBAL T_ACI_RETURN sat_Plus_Percent_COPS ( T_ACI_CMD_SRC srcId,
+                                   T_ACI_COPS_MOD mode,
+                                   T_ACI_COPS_FRMT format,
+                                   CHAR * oper,
+                                   T_ACI_AT_CMD cmd)
+{
+  T_MM_CMD_PRM * pMMCmdPrm;  /* points to MM command parameters */
+
+
+  T_ACI_NRG_RGMD regMode; /*NRG Registration mode */
+  T_ACI_NRG_FRMT regFormat; 
+  T_ACI_NRG_SVMD  svrMode;
+
+
+  TRACE_FUNCTION ("sat_Plus_Percent_COPS()");
+
+
+  pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm;
+  mmShrdPrm.COPSmodeBeforeAbort = mmShrdPrm.COPSmode;
+  
+/*
+  *  check MM entity status
+  */
+  if( mmEntStat.curCmd NEQ AT_CMD_NONE )
+
+    return( AT_BUSY );
+
+
+/*
+  *convert  format to NRG type and set the COPS format value.
+  */
+
+
+if( format EQ COPS_FRMT_NotPresent ) format = pMMCmdPrm -> COPSfrmt;
+
+  
+  switch( format )
+  {
+    case(    COPS_FRMT_NotPresent): 
+    regFormat = NRG_FRMT_NotPresent; 
+    break;
+    case(   COPS_FRMT_Numeric ): 
+    regFormat =NRG_FRMT_Numeric ; 
+    break;
+    case( COPS_FRMT_Short):
+    regFormat = NRG_FRMT_Short; 
+    break;
+    case( COPS_FRMT_Long):
+    regFormat = NRG_FRMT_Long; 
+    break;
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+pMMCmdPrm -> COPSfrmt = format;
+
+
+
+/*
+  * The function cmhMM_OperatorSelect() is using the NRG types. Therefore the following conversion is required.
+  * Also the appropiate value for Service Mode, required by cmhMM_OperatorSelect(),  is set. 
+  */
+
+
+if( mode EQ COPS_MOD_NotPresent ) mode = mmShrdPrm.COPSmode;
+
+switch( mode )
+  {
+    case( COPS_MOD_NotPresent   ): 
+    regMode = NRG_RGMD_NotPresent; 
+    svrMode = NRG_SVMD_NotPresent;
+    break;
+    case(  COPS_MOD_Auto  ): 
+    regMode =NRG_RGMD_Auto ; 
+    svrMode = NRG_SVMD_Full;    /* Only Full Service makes sense for Automatic Mode */
+    break;
+    case(  COPS_MOD_Man):
+    regMode = NRG_RGMD_Manual; 
+    svrMode = NRG_SVMD_Full;   /* Only Full Service makes sense for Manual Mode */ 
+    break;
+    case(  COPS_MOD_Dereg):
+    regMode = NRG_RGMD_Dereg; 
+    svrMode = NRG_SVMD_Limited;    
+    break;
+    case(   COPS_MOD_Both ): 
+    regMode = NRG_RGMD_Both; 
+    svrMode = NRG_SVMD_Full;  /* Only Full Service makes sense for the Both Mode */
+    break;
+    case(COPS_MOD_SetOnly):  /*This mode can be fully handled in this function */
+       /* DO NOT SET mmShrdPrm.COPSmode !!! */
+      pMMCmdPrm -> COPSfrmt = format;
+      return AT_CMPL;
+    default:
+      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+      return( AT_FAIL );
+  }
+
+mmShrdPrm.COPSmode = mode;
+
+
+
+/*Set the value of the current command executed */
+mmEntStat.curCmd  = cmd;  
+
+return cmhMM_OperatorSelect(srcId,regMode,svrMode,regFormat,oper);
+ 
+}
+#ifdef TI_PS_FF_AT_P_CMD_CTREG
+/*
++--------------------------------------------------------------------+
+| PROJECT : GSM-PS (6147)         MODULE  : CMH_MMS                  |
+| STATE   : code                  ROUTINE : sAT_PercentCTREG         |
++--------------------------------------------------------------------+
+
+  PURPOSE : This is the functional counterpart to the %CTREG AT command
+            which will update the two tables present in common shared
+            location.
+
+*/
+
+GLOBAL T_ACI_RETURN sAT_PercentCTREG ( T_ACI_CMD_SRC srcId, T_TREG *treg )
+{
+  BOOL ret;
+
+  TRACE_FUNCTION ("sAT_PercentCTREG()");
+
+/*
+ *-------------------------------------------------------------------
+ * check command source
+ *-------------------------------------------------------------------
+ */
+  if(!cmh_IsVldCmdSrc (srcId))
+  {
+    TRACE_EVENT_P1("sAT_PercentCTREG(): Invalid source: %d", srcId);
+    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
+    return( AT_FAIL );
+  }
+
+  ret = cl_shrd_set_treg_val(treg);
+
+  if(ret EQ TRUE)
+  {
+    return( AT_CMPL );
+  }
+  return(AT_FAIL);
+}
+#endif /* TI_PS_FF_AT_P_CMD_CTREG */
+
+/*==== EOF ========================================================*/