FreeCalypso > hg > fc-tourmaline
view src/cs/drivers/drv_app/kpd/kpd_scan_functions.h @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 19 Oct 2020 05:11:29 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/** * @file kpd_scan_functions.h * * Declaration of keypad interface functions. * * @author Laurent Sollier (l-sollier@ti.com) * @version 0.1 */ /* * History: * * Date Author Modification * ---------------------------------------- * 10/10/2001 L Sollier Create * * * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef _KPD_SCAN_FUNCTIONS_H_ #define _KPD_SCAN_FUNCTIONS_H_ #include "kpd/kpd_i.h" #include "rv/rv_general.h" /* For Windows environment */ #ifdef _WINDOWS #ifdef __cplusplus extern "C" { #endif #endif /** * @name Internal functions * */ /*@{*/ #if (CHIPSET == 12) /** * function: kpd_init_ctrl_reg * Initialize the Control register */ void kpd_init_ctrl_reg(const UINT8 software_nreset, const T_KPD_Nsoftware_mode nsoftware_mode, const T_KPD_PTV ptv, const T_KPD_EnableDetection long_key_process_en, const T_KPD_EnableDetection time_out_empty_en, const T_KPD_EnableDetection time_out_long_key_en, const T_KPD_EnableDetection repeat_mode_en); /** * function: kpd_software_reset * * Reset software */ void kpd_software_reset(void); #endif /** * function: kpd_initialize_keypad_hardware * * Hardware initialization (Not implemented on Riviera tool). */ void kpd_initialize_keypad_hardware(void); /** * function: kpd_acknowledge_key_pressed * * Unmask keypad interrupt (Not implemented on Riviera tool). */ void kpd_acknowledge_key_pressed(void); /** * function: kpd_key_pressed * * This function send the message T_KPD_KEY_PRESSED_MSG with the value of key pressed. * * @param value Physical key identification. */ void kpd_key_pressed(UINT8 value); /** * function: kpd_scan_keypad * * This function returns the physical key Id for the pressed key, or * KPD_KEY_NULL if no key is pressed. * * @return Physical key identification. */ T_KPD_PHYSICAL_KEY_ID kpd_scan_keypad(void); #ifdef _WINDOWS /** * function: kpd_key_handler * * This function is called when a key is pressed (Interrupt process). * */ void kpd_key_handler(void); /** * function: kpd_key_released * * This function send the message T_KPD_KEY_PRESSED_MSG with the value of key=KPD_PKEY_NULL. * */ void kpd_key_released(void); /** * function: kpd_set_key_value * * This function set the key identification. * * @param value Physical key identification. */ void kpd_set_key_value(T_KPD_PHYSICAL_KEY_ID value); #ifdef __cplusplus } #endif #endif /*@}*/ #endif /* #ifndef _KPD_SCAN_FUNCTIONS_H_ */