FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/gtt_include/ctm/viterbi.h @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 19 Oct 2020 05:11:29 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* ******************************************************************************* * * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH * * The program(s) may be used and/or copied only with the * written permission from Ericsson or in accordance * with the terms and conditions stipulated in the agreement or * contract under which the program(s) have been supplied. * ******************************************************************************* * * File : viterbi.h * Purpose : Header file for viterbi.c * Author : Francisco Javier Gil Gomez * * Revision history * * $Log: $ * ******************************************************************************* */ #ifndef viterbi_h #define viterbi_h "$Id: $" #include <stdio.h> #include <math.h> #include "conv_poly.h" /* definition of viterbi_t */ /***********************************************************************/ /* viterbi_init() */ /* ************** */ /* Initialization of the Viterbi decoder. */ /* */ /* output variables: */ /* *viterbi_state initialized state variable of the decoder */ /* */ /***********************************************************************/ void viterbi_init(viterbi_t* viterbi_state); /***********************************************************************/ /* viterbi_reinit() */ /* **************** */ /* Re-Initialization of the Viterbi decoder. This function should be */ /* used for re-setting a Viterbi decoder that has already been */ /* initialized. In contrast to viterbi_init(), this reinit function */ /* does not calculate the values of all members of viterbi_state that */ /* do not change during the execution of the Viterbi algorithm. */ /* */ /* output variables: */ /* *viterbi_state initialized state variable of the decoder */ /* */ /***********************************************************************/ void viterbi_reinit(viterbi_t* viterbi_state); /***********************************************************************/ /* viterbi_exec() */ /* ************** */ /* Execution of the Viterbi decoder */ /* */ /* input variables: */ /* inputword Vector with gross bits */ /* length_input Number of valid gross bits in vector inputword.*/ /* length_input must be an integer multiple of */ /* CHC_RATE */ /* */ /* output variables: */ /* out Vector with the decoded net bits. The net bits */ /* are either 0 or 1. */ /* *num_valid_out_bits Number of valid bits in vector out */ /* */ /* input/output variables: */ /* *viterbi_state State variable of the decoder */ /* */ /***********************************************************************/ void viterbi_exec(WORD16* inputword, WORD16 length_input, WORD16* out, WORD16* num_valid_out_bits, viterbi_t* viterbi_state); #endif