view src/cs/layer1/p_include/l1p_sign.h @ 51:04aaa5622fa7

disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1P_SIGN.H
 *
 *        Filename l1p_sign.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#define P_GPRS  ( P_L1C + 2 )

// Messages Packet Transfer <-> L1A
#define MPHP_SINGLE_BLOCK_REQ             ( ( P_GPRS << 8 ) | 1  )
#define MPHP_SINGLE_BLOCK_CON             ( ( P_GPRS << 8 ) | 2  )
#define MPHP_STOP_SINGLE_BLOCK_REQ        ( ( P_GPRS << 8 ) | 3  )
#define MPHP_STOP_SINGLE_BLOCK_CON        ( ( P_GPRS << 8 ) | 4  )
#define L1P_SINGLE_BLOCK_CON              ( ( P_GPRS << 8 ) | 5  )

#define MPHP_ASSIGNMENT_REQ               ( ( P_GPRS << 8 ) | 6  )
#define MPHP_ASSIGNMENT_CON               ( ( P_GPRS << 8 ) | 7  )

#define MPHP_TBF_RELEASE_REQ              ( ( P_GPRS << 8 ) | 8  )
#define MPHP_TBF_RELEASE_CON              ( ( P_GPRS << 8 ) | 9  )

#define MPHP_REPEAT_UL_FIXED_ALLOC_REQ    ( ( P_GPRS << 8 ) | 10 )
#define MPHP_REPEAT_UL_FIXED_ALLOC_CON    ( ( P_GPRS << 8 ) | 11 )

#define MPHP_PDCH_RELEASE_REQ             ( ( P_GPRS << 8 ) | 12 )
#define MPHP_PDCH_RELEASE_CON             ( ( P_GPRS << 8 ) | 13 )

#define MPHP_TIMING_ADVANCE_REQ           ( ( P_GPRS << 8 ) | 14 )
#define MPHP_TIMING_ADVANCE_CON           ( ( P_GPRS << 8 ) | 15 )

#define MPHP_UPDATE_PSI_PARAM_REQ         ( ( P_GPRS << 8 ) | 16 )
#define MPHP_UPDATE_PSI_PARAM_CON         ( ( P_GPRS << 8 ) | 17 )


#define MPHP_RA_REQ                       ( ( P_GPRS << 8 ) | 18 )
#define MPHP_RA_CON                       ( ( P_GPRS << 8 ) | 19 )
#define MPHP_RA_STOP_REQ                  ( ( P_GPRS << 8 ) | 20 )
#define MPHP_RA_STOP_CON                  ( ( P_GPRS << 8 ) | 21 )

#define MPHP_POLLING_RESPONSE_REQ         ( ( P_GPRS << 8 ) | 22 )
#define MPHP_POLLING_IND                  ( ( P_GPRS << 8 ) | 23 )

#define L1P_RA_DONE                       ( ( P_GPRS << 8 ) | 24 )

// Messages Packet Idle <-> L1A
#define MPHP_START_PCCCH_REQ              ( ( P_GPRS << 8 ) | 25 )
#define MPHP_STOP_PCCCH_REQ               ( ( P_GPRS << 8 ) | 26 )
#define MPHP_STOP_PCCCH_CON               ( ( P_GPRS << 8 ) | 27 )
#define MPHP_SCELL_PBCCH_REQ              ( ( P_GPRS << 8 ) | 28 )
#define MPHP_SCELL_PBCCH_STOP_REQ         ( ( P_GPRS << 8 ) | 29 )
#define MPHP_SCELL_PBCCH_STOP_CON         ( ( P_GPRS << 8 ) | 30 )
#define MPHP_CR_MEAS_REQ                  ( ( P_GPRS << 8 ) | 31 )
#define MPHP_CR_MEAS_STOP_REQ             ( ( P_GPRS << 8 ) | 32 )
#define MPHP_CR_MEAS_STOP_CON             ( ( P_GPRS << 8 ) | 33 )
#define MPHP_INT_MEAS_REQ                 ( ( P_GPRS << 8 ) | 34 )
#define MPHP_INT_MEAS_STOP_REQ            ( ( P_GPRS << 8 ) | 35 )
#define MPHP_INT_MEAS_STOP_CON            ( ( P_GPRS << 8 ) | 36 )
#define MPHP_NCELL_PBCCH_REQ              ( ( P_GPRS << 8 ) | 37 )
#define MPHP_NCELL_PBCCH_STOP_REQ         ( ( P_GPRS << 8 ) | 38 )
#define MPHP_NCELL_PBCCH_STOP_CON         ( ( P_GPRS << 8 ) | 39 )

#define MPHP_DATA_IND                     ( ( P_GPRS << 8 ) | 40 )
#define MPHP_CR_MEAS_IND                  ( ( P_GPRS << 8 ) | 41 )
#define MPHP_INT_MEAS_IND                 ( ( P_GPRS << 8 ) | 42 )
#define MPHP_TINT_MEAS_IND                ( ( P_GPRS << 8 ) | 43 )
#define MPHP_NCELL_PBCCH_IND              ( ( P_GPRS << 8 ) | 44 )
#define MPHP_TCR_MEAS_REQ                 ( ( P_GPRS << 8 ) | 45 )
#define MPHP_TCR_MEAS_IND                 ( ( P_GPRS << 8 ) | 46 )
#define MPHP_TCR_MEAS_STOP_REQ            ( ( P_GPRS << 8 ) | 47 )
#define MPHP_TCR_MEAS_STOP_CON            ( ( P_GPRS << 8 ) | 48 )

/*** L1S -> L1A communication ***/
#define L1P_PALLC_INFO                    ( ( P_GPRS << 8)  | 49)
#define L1P_PNP_INFO                      ( ( P_GPRS << 8)  | 50)
#define L1P_PEP_INFO                      ( ( P_GPRS << 8)  | 51)
#define L1P_PBCCHS_INFO                   ( ( P_GPRS << 8)  | 52)
#define L1P_PACCH_INFO                    ( ( P_GPRS << 8)  | 53)
#define L1P_CR_MEAS_DONE                  ( ( P_GPRS << 8)  | 54)
#define L1P_TRANSFER_DONE                 ( ( P_GPRS << 8)  | 55)
#define L1P_TCR_MEAS_DONE                 ( ( P_GPRS << 8)  | 56)
#define L1P_TBF_RELEASED                  ( ( P_GPRS << 8)  | 57)
#define L1P_ITMEAS_IND                    ( ( P_GPRS << 8)  | 58)
#define L1P_POLL_DONE                     ( ( P_GPRS << 8)  | 59)
#define L1P_PDCH_RELEASED                 ( ( P_GPRS << 8)  | 60)
#define L1P_TA_CONFIG_DONE                ( ( P_GPRS << 8)  | 61)
#define L1P_PBCCHN_INFO                   ( ( P_GPRS << 8)  | 62)
#define L1P_REPEAT_ALLOC_DONE             ( ( P_GPRS << 8)  | 63)
#define L1P_ALLOC_EXHAUST_DONE            ( ( P_GPRS << 8)  | 64)