view src/cs/riviera/rvf/rvf_trace_adapt.c @ 51:04aaa5622fa7

disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  Name        rvf_trace_adapt.c                                           */
/*                                                                          */
/*  Function    this file is used to trace messages if TRACE module is      */
/*              activated or not                                            */
/*                                                                          */
/*  Version		0.1															*/
/*																			*/
/* 	Date       	Modification												*/
/*  ------------------------------------									*/
/*  03/19/2001		Create													*/
/*																			*/
/*	Author		Pascal Puel (p-puel@tif.ti.com)								*/
/*																			*/
/* (C) Copyright 1999 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/


#ifndef _WINDOWS
	#include "config/rv.cfg"
	#include "config/trace.cfg"
#endif

#include "rv/general.h"
#include "rv/rv.h"
#include "rv/rv_general.h"
#include "rvf/rvf_api.h"

#include "rvt/rvt_gen.h"

#include "rvm/rvm_use_id_list.h"

#include <string.h>

/* DAR files used to redirect trace to DAR entity */
//#ifdef RVM_DAR_SWE
//	#include "dar_api.h"
//	#include "dar_gen.h"
//	#include "dar_structs_i.h"
//	#include "dar_diagnose_i.h"

	/* Define a pointer to the DAR Global Environment Control block   */
//	extern T_DAR_ENV_CTRL_BLK *dar_gbl_var_p;
//#endif

UINT8 rvf_trace_level = TRACE_LEVEL_FILTER;
UINT32 rvf_layer_mask = LAYER_DBG;

/* Decimal to hexadecimal conversion table */
static const char Num2Char[] = {'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'};

extern T_RVT_USER_ID rv_trace_user_id;

#ifndef FRAMING_PROTOCOL
void rvf_send_trace1 (char * msg, UINT8 msg_length, UINT32 val, UINT8 TRACE_LEVEL, UINT32 swe_use_id)
{	
	UINT32 trace_type = swe_use_id;

	/* Apply the appropriate compilation flags to filter trace messages based on
	their type and level */
	if ((TRACE_LEVEL < RV_TRACE_LEVEL_WARNING) ||
		((TRACE_LEVEL <= rvf_trace_level) &&
		 (((trace_type & rvf_layer_mask & 0x0000FFFF) == (trace_type & 0x0000FFFF)) ||
		  ((trace_type & rvf_layer_mask & 0xFFFF0000) != (trace_type & 0xFFFF0000)))))
		{
			char * buff;

			if (val == NULL_PARAM)
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length, (T_RVT_BUFFER *)&buff);
				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{
					/* Copy the body of the message */
					memcpy( buff, msg, msg_length);
					rvt_send_trace_no_cpy( buff, rv_trace_user_id, msg_length, RVT_ASCII_FORMAT);
				}
			}
			else
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length +11, (T_RVT_BUFFER *)&buff);
				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{	
					UINT8 i;
				
					/* Copy the body of the message */
					memcpy( buff, msg, msg_length);

					((char *)buff)[msg_length]		= ' ';
					((char *)buff)[msg_length + 1]	= '0'; 
					((char *)buff)[msg_length + 2]	= 'x';
					
					for (i=0; i<8; i++)
					{
						((char *)buff)[msg_length+3+i] = Num2Char[(UINT8)((val<<(i<<2))>>28)];
					}
					rvt_send_trace_no_cpy(buff, rv_trace_user_id, msg_length + 11, RVT_BINARY_FORMAT);
				}
			}
		}
}
#else
/********************************* VERSION WITH TRACE MUX **************************/

void rvf_send_trace1 (char * msg, UINT8 msg_length, UINT32 val, UINT8 TRACE_LEVEL, UINT32 swe_use_id)
{	
	UINT32 trace_type = swe_use_id;

	/* Apply the appropriate compilation flags to filter trace messages based
	on their type and level */
	if ((TRACE_LEVEL < RV_TRACE_LEVEL_WARNING) ||
		((TRACE_LEVEL <= rvf_trace_level) &&
		 (((trace_type & rvf_layer_mask & 0x0000FFFF) == (trace_type & 0x0000FFFF)) ||
		  ((trace_type & rvf_layer_mask & 0xFFFF0000) != (trace_type & 0xFFFF0000)))))
		{
			char * buff;

			if (val == NULL_PARAM)
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length+5, (T_RVT_BUFFER *)&buff);

				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{
					/* Add the trace type (MSB and LSB) and Trace level	*/
					buff [0] = (char) (trace_type >> 24);
					buff [1] = (char) (trace_type >> 16);
					buff [2] = (char) (trace_type >> 8);
					buff [3] = (char) (trace_type & 0xff);
					buff [4] = (char) TRACE_LEVEL;

					/* Copy the message in the new buffer */
					memcpy(buff+5, msg, msg_length);
					
					/* Send the trace message */
					rvt_send_trace_no_cpy ((T_RVT_BUFFER) buff, rv_trace_user_id, msg_length+5, RVT_BINARY_FORMAT);
				}
			}
			else
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length+16, (T_RVT_BUFFER *)&buff);

				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{	
					UINT8 i;

					/* Add the trace type (MSB and LSB) and Trace level	*/
					buff [0] = (char) (trace_type >> 24);
					buff [1] = (char) (trace_type >> 16);
					buff [2] = (char) (trace_type >> 8);
					buff [3] = (char) (trace_type & 0xff);
					buff [4] = (char) TRACE_LEVEL;

					/* Copy the message in the new buffer */
					memcpy( buff + 5, msg, msg_length);
					
					buff[5+msg_length]		= ' ';
					buff[5+msg_length + 1]	= '0'; 
					buff[5+msg_length + 2]	= 'x';
					
					for (i=0; i<8; i++)
					{
						((char *)buff)[8+msg_length+i] = Num2Char[(UINT8)((val<<(i<<2))>>28)];
					}

					/* Send the trace message */
					rvt_send_trace_no_cpy ((T_RVT_BUFFER) buff, rv_trace_user_id, msg_length+16, RVT_BINARY_FORMAT);
				}
			}
		}
}
#endif