view src/cs/services/cst/cus_cst.h @ 51:04aaa5622fa7

disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT : XXX                        SOURCE : CUS_CST.H            |
| AUTHOR  : XXX                        VERSION: 1.0                  |
| CREATED : 01.02.99                   STATE  : code                 |
+--------------------------------------------------------------------+

   MODULE  : CUS_CST

   PURPOSE : Custom dependent definitions for the CST entity of the
             mobile station.

             Use this header for definitions to integrate the protocol
             stack entity CST in your target system.
*/

#ifndef CUS_CST_H
#define CUS_CST_H


/*==== CONSTANTS ==================================================*/
/*
 * TIMER_VALUES
 *
 * Description :  The constants define the timer values for the CST
 *                timer TXXX depending on the various channel types
 *                and service access point identifiers.
 *
 *                If your target system uses other units please
 *                change the values.
 */

/*
 * Unit is 1 ms 
 */
#define T_RX_VALUE              1000
#define TICS_PER_DECIHOURS      (1000*60*6)


/*
 * MAX_CST_TIMER
 *
 * Description :  The constant define the number of timer available
 *                in the timer pool.
 */
#define MAX_CST_TIMER 4

/*
 * VERSION
 *
 * Description :  The constants define the type and the value of a
 *                version identification. The version is part of the
 *                monitor struct.
 */
#define T_VERSION   char
#define VERSION_CST  "CST 1.0"

/*
 * VSI_CALLER
 *
 * Description :  For multithread applications the constant VSI_CALLER
 *                must be defined to identify the calling thread of the
 *                VSI-Interface. This must be done correponding to the
 *                type of T_VSI_CALLER in VSI.H. The comma symbol is
 *                neccessary because the vsi-functions are called
 *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
 */

#ifdef OPTION_MULTITHREAD
#define VSI_CALLER cst_handle,
#define VSI_CALLER_SINGLE cst_handle
#else
#define VSI_CALLER
#define VSI_CALLER_SINGLE
#endif

#endif // CUS_CST_H