FreeCalypso > hg > fc-tourmaline

view src/cs/services/dar/dar_error_hdlr.c @ 51:04aaa5622fa7

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  dar_error_hdlr.c                                            */
/*                                                                          */
/*  Purpose:  This file contains routines used to report unrecoverable      */
/*                 memory errors that might occur.                          */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date               Modification                                         */
/*  ------------------------------------------------------------------------*/
/*  27 September 2001  Create                                               */
/*                                                                          */
/*  Author:  Stephanie Gerthoux                                             */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#ifdef RVM_DAR_SWE

   #include "rv/rv_general.h"
   #include "rvf/rvf_api.h"
   #include "dar/dar_error_hdlr_i.h"
   #include "dar/dar_macro_i.h"

   /********************************************************************************/
   /*                                                                              */
   /*    Function Name:   dar_error_trace                                          */
   /*                                                                              */
   /*    Purpose:         This function is used to report error occured during the */
   /*                     diagnose entity execution                                */
   /*                                                                              */
   /*    Input Parameters:                                                         */
   /*        status       - Contains the error code to be reported.                */
   /*                                                                              */
   /*    Output Parameters:                                                        */
   /*        None.                                                                 */
   /*                                                                              */
   /*    Global Parameters:                                                        */
   /*        None.                                                                 */
   /*                                                                              */
   /*    Note:                                                                     */
   /*        None.                                                                 */
   /*                                                                              */
   /*    Revision History:                                                         */
   /*       27 September 01           Create                                       */
   /*                                                                              */
   /********************************************************************************/
   void dar_error_trace(UINT8 error_id)
   {
      switch(error_id)
      {
         case DAR_ENTITY_NOT_START:
         {
            DAR_SEND_TRACE("DAR entity not started.",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_NO_MEMORY:
         {
            DAR_SEND_TRACE("DAR entity has not enough memory",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_BAD_PARAMETER:
         {
            DAR_SEND_TRACE("DAR entity has bad parameters",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ERROR_STOP_EVENT:
         {
            DAR_SEND_TRACE("DAR entity has received a stop error event",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ERROR_START_EVENT:
         {
             DAR_SEND_TRACE("DAR entity has received a start error event",RV_TRACE_LEVEL_ERROR);
             break;
         }

         case DAR_ENTITY_BAD_MESSAGE:
         {
            DAR_SEND_TRACE("DAR entity has received a bad message",RV_TRACE_LEVEL_ERROR);
            break;
         }  
      }
   }
   /************************* End of dar_error_trace function **********************/

   /********************************************************************************/
   /*                                                                              */
   /*    Function Name:   dar_ffs_error_trace                                      */
   /*                                                                              */
   /*    Purpose:         This function is used to report error occured during the */
   /*                     dar entity execution                                     */
   /*                                                                              */
   /*    Input Parameters:                                                         */
   /*        status       - Contains the error code to be reported.                */
   /*                                                                              */
   /*    Output Parameters:                                                        */
   /*        None.                                                                 */
   /*                                                                              */
   /*    Global Parameters:                                                        */
   /*        None.                                                                 */
   /*                                                                              */
   /*    Note:                                                                     */
   /*        None.                                                                 */
   /*                                                                              */
   /*    Revision History:                                                         */
   /*       29 october 01           Create                                         */
   /*                                                                              */
   /********************************************************************************/
   void dar_ffs_error_trace(UINT8 error_id)
   {
      switch(error_id)
      {
         case DAR_ENTITY_NO_MEMORY:
         {
            DAR_SEND_TRACE("DAR FFS entity has not enough memory",RV_TRACE_LEVEL_ERROR);
            break;
         }
         case DAR_ENTITY_FILE_ERROR:
         {
            DAR_SEND_TRACE("DAR FFS entity has received a wrong file name or the flash is not formatted",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_FILE_NO_SAVED:
         {
            DAR_SEND_TRACE("DAR FFS entity has not saved the file",RV_TRACE_LEVEL_ERROR);
            break;
         }

         case DAR_ENTITY_FILE_NO_CLOSE:
         {
            DAR_SEND_TRACE("DAR FFS entity has not closed the file",RV_TRACE_LEVEL_ERROR);
            break;
         }
      } /* switch(error_id) */
   } /* dar_ffs_error_trace */
   /************************* End of dar_ffs_error_trace function **********************/

#endif /* #ifdef RVM_DAR_SWE */