FreeCalypso > hg > fc-tourmaline

view src/g23m-aci/aci/cmh_psi.h @ 51:04aaa5622fa7

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
disable deep sleep when Iota LEDB is on TI's Iota chip docs say that CLK13M must be running in order for LEDB to work, and practical experience on Mot C139 which uses Iota LEDB for its keypad backlight concurs: if Calypso enters deep sleep while the keypad backlight is turned on, the light flickers visibly as the chipset goes into and out of deep sleep. TI's original L1 sleep manager code had logic to disable deep sleep when LT_Status() returns nonzero, but that function only works for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no check of Iota LEDB status anywhere. Change this code for our current hardware: disable deep sleep when Iota LEDB has been turned on through LLS.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 19 Oct 2020 05:11:29 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_PKTIO
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the command handler of the 
|             psi managment.
+----------------------------------------------------------------------------- 
*/ 
#ifdef FF_PSI

#ifndef CMH_PSI_H
#define CMH_PSI_H


#include "aci_lst.h"

/*==== CONSTANTS ==================================================*/
  
#define ACI_DIO_ID_MASK 0x0000FF00  /* bit 08-15: device combination id from DIO Interface layer, v4 */

/*==== TYPES ======================================================*/
typedef enum{
   PSI_DTI_CLS_CNF,
   PSI_DTI_CLS_IND
}T_PSI_DTI_CLS_TYP;

typedef union
{
  T_DIO_CAP_SER             dio_cap_ser;    
  T_DIO_CAP_SER_MUX         dio_cap_ser_mux;   
  T_DIO_CAP_PKT             dio_cap_pkt;       
} T_DIO_CAP_PSI;
typedef T_DIO_CAP_PSI T_ACI_PSI_CAP_PAR;

typedef union 
{
  T_DIO_DCB_SER  dio_cap_ser;
  T_DIO_DCB_SER_MUX  dio_cap_ser_mux;
  T_DIO_DCB_PKT  dio_cap_pkt;
} T_ACI_PSI_CAP;

typedef union 
{
  T_DIO_DCB_SER  dio_dcb_ser;
  T_DIO_DCB_SER_MUX  dio_dcb_ser_mux;
  T_DIO_DCB_PKT  dio_dcb_pkt;
} T_ACI_PSI_DCB_PAR; 

typedef struct {
  U32               devId;
 T_ACI_PSI_DCB_PAR  dcbPar;
} T_ACI_DEVICE_DCB_ENTRY;

typedef struct
{
    U32 devId;
    T_ACI_PSI_CAP_PAR psi_cap;
    U8 psi_data_mode;
} T_ACI_PSI;

typedef struct
{
  UBYTE               src_id;
  T_DTI_ENTITY_ID     entity_to_conn;
  UBYTE               num_entities;
  T_DTI_CONN_MODE     mode;
  T_DTI_CONN_CB*      cb;
  UBYTE               capability;
  UBYTE               cid;
  T_ACI_AT_CMD        last_cmd;
}T_ACI_PSI_CALL_TYPE;

/*==== PROTOTYPES =================================================*/
EXTERN void cmhPSI_DTI_OpenCnf (U32 devId, U32 link_id, T_DTI_CONN_RESULT result);
EXTERN void cmhPSI_DTI_Close (U32 devId, T_PSI_DTI_CLS_TYP  state, U32 link_id);
EXTERN void cmhPSI_Line_State_Ind (U32 devId, U16 line_state);
EXTERN BOOL cmhPSItest_srcId( UBYTE srcId, void *elem);
EXTERN void cmhPSI_getdata ( T_ACI_CMD_SRC srcId );

EXTERN BOOL cmhPSItest_device (U32 devId, void *elem);
EXTERN void cmhPSI_AddDeviceToDcbParameter( U32 devId, U32 dio_driver_type);
EXTERN void cmhPSI_erase_src_elem(UBYTE srcId);
EXTERN void cmhPSI_RemoveDeviceFromDcbParameter( U32 devId );
EXTERN void cmhPSI_CleanDcbParameterList( void );
EXTERN T_ACI_DEVICE_DCB_ENTRY* cmhPSI_GetDcbParOverDevice( U32 devId );
EXTERN T_ACI_DEVICE_DCB_ENTRY* cmhPSI_GetDeviceParOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhPSI_GetParityOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhPSI_GetStopBitOverSrcID( UBYTE srcId );
EXTERN UBYTE cmhPSI_GetDataBitOverSrcID( UBYTE srcId );
EXTERN void cmhPSI_SetDcbParToUnchanged( T_ACI_DEVICE_DCB_ENTRY *dcbntry );
EXTERN T_ACI_RETURN cmhPSI_SetDataRate ( UBYTE srcId, T_ACI_BD_RATE  rate);
EXTERN T_ACI_RETURN cmhPSI_SetCharacterFraming ( UBYTE srcId, 
                                                  T_ACI_BS_FRM format, 
                                                  T_ACI_BS_PAR parity );
EXTERN void cmhPSI_Ind (T_ACI_PSI *psi_indic_msg, UBYTE src_id,U32 dio_cap);
EXTERN T_ACI_RETURN cmhPSI_SetFlowControl (UBYTE srcId, T_ACI_RX_FLOW_CTRL DCE_by_DTE);
EXTERN T_ACI_RETURN cmhPSI_SetEscape( UBYTE srcId, UBYTE detection );
EXTERN T_ACI_BS_FRM cmhPSI_GetFktInterfaceFormat( T_ACI_DEVICE_DCB_ENTRY *dcbntry );
EXTERN T_ACI_BS_PAR cmhPSI_GetFktInterfaceParity( T_ACI_DEVICE_DCB_ENTRY *dcbntry );
EXTERN T_ACI_DTI_PRC_PSI *cmhPSI_find_dlci (T_ACI_LIST *search_list, U32 devId, UBYTE dlci );
EXTERN void cmhPSI_lst_init (void);
EXTERN void cmhPSI_clean_all_elem(void);
EXTERN T_ACI_LIST *psi_src_params;
EXTERN T_ACI_LIST *psi_dcb_par;

EXTERN  void psaPSI_SetConfReq( T_ACI_DEVICE_DCB_ENTRY *dcbPar );
/*==== EXPORT =====================================================*/
#ifdef CMH_PSIF_C
GLOBAL T_ACI_PSI_CALL_TYPE psi_ato;
#else
EXTERN T_ACI_PSI_CALL_TYPE psi_ato;
#endif  /* CMH_PSIF_C */

#endif /*CMH_PSI_H*/

#endif
/*==== EOF =======================================================*/