FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/tcpip/include/atp_config.h @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 19 Oct 2020 05:11:29 +0000 |
| parents | fa8dc04885d8 |
| children |
line wrap: on
line source
/******************************************************************************* * * File Name : atp_config.h * * Configuration setting of ATP SW entity * * (C) Texas Instruments, all rights reserved * * Version number : 0.1 Date : 28-Feb-2000 * * History : 0.1 - Created by E. Baissus * * * Author : Eric Baissus : e-baissus@ti.com * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved ******************************************************************************/ #ifndef ATP_CONFIG_H #define ATP_CONFIG_H #include "rvf_pool_size.h" /* Stack & Memory Bank sizes definitions */ /* Maximum number of SW entity which can register simultaneously register to the ATP SW entity */ #define ATP_MAX_NB_SW_ENTITY 10 // This does not includes GSM SW entity #define ATP_SW_ENTITY_NAME_MAX_CARAC 10 #define ATP_SPP_MAX_PENDING_PORT 10 /* Maximum number of port which can be in open port pending state at the same time Note that a port is considered to be in pending state when in server mode */ #define ATP_HSG_NAME "HSG" /* Sw entity name : used to register to ATP the HSG*/ #define ATP_GSM_NAME "GSM" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_SPP_NAME "SPP" /* Sw entity name : used to register to ATP the SPP */ #define ATP_HS_NAME "HS" /* Sw entity name : used to register to ATP the HS */ #define ATP_AAA_NAME "AAA" /* Sw entity name of the GSM-PS used to register to the ATP */ #define ATP_DEFAULT_GSM_MAX_PACKET_SIZE (1500) // Default value indicating the maximum size that is supported // when GSM sends a packet to ATP #define ATP_MAX_NB_OF_PORT_SUPPORTED_BY_GSM (3) #define ATP_MAX_CMD_LENGTH (0xFF) // Maximum length of a command handled by ATP /* Configuration parameters for environment */ #define ATP_MB_PRIM_SIZE RVF_ATP_MB1_SIZE #define ATP_MB_PRIM_WATERMARK (ATP_MB_PRIM_SIZE - 1000) /* ** This def is in rvm_priorities.h ** #define ATP_SWE_LEVEL (4); // SHOULD BE DEFINED IN RVM_PRIORITIES.H !!! */ #endif