FreeCalypso > hg > fc-tourmaline
view src/g23m-gsm/mm/cnf_mm.h @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 19 Oct 2020 05:11:29 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (8410) | Modul : CNF_MM +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Dynamic Configuration for Mobility Management +----------------------------------------------------------------------------- */ #ifndef CNF_MM_H #define CNF_MM_H /*==== CONSTANTS ==================================================*/ /* * CONFIGURATION PARAMETER * * Description : The constants define the commands for dynamic * configuration proposals. */ #define MM_TIMER_SET "TIMER_SET" #define MM_TIMER_RESET "TIMER_RESET" #define MM_TIMER_SPEED_UP "TIMER_SPEED_UP" #define MM_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN" #define MM_TIMER_SUPPRESS "TIMER_SUPPRESS" #define MM_T3212_CNT "T3212_CNT" #define MM_USE_STORED_BCCH "USE_STORED_BCCH" #define MM_FFS_RESET_EPLMN "FFS_RESET_EPLMN" #define MM_FFS_READ_EPLMN "FFS_READ_EPLMN" #define MM_FFS_READ_EPLMN_INIT "FFS_READ_EPLMN_INIT" #define MM_FFS_WRITE_EPLMN "FFS_WRITE_EPLMN" /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ #endif