FreeCalypso > hg > fc-tourmaline
view src/gpf/inc/pco_view_templ.h @ 51:04aaa5622fa7
disable deep sleep when Iota LEDB is on
TI's Iota chip docs say that CLK13M must be running in order for
LEDB to work, and practical experience on Mot C139 which uses
Iota LEDB for its keypad backlight concurs: if Calypso enters
deep sleep while the keypad backlight is turned on, the light
flickers visibly as the chipset goes into and out of deep sleep.
TI's original L1 sleep manager code had logic to disable deep sleep
when LT_Status() returns nonzero, but that function only works
for B-Sample and C-Sample LT, always returns 0 on BOARD 41 - no
check of Iota LEDB status anywhere. Change this code for our
current hardware: disable deep sleep when Iota LEDB has been
turned on through LLS.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 19 Oct 2020 05:11:29 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : PCO2 | Modul : PCO_VIEW_TEMPLATE +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul contains a template of a PCO viewer class | with basic functions for several PCO control messages. | It can either be used just to connect to a PCO server or | can be specialized and extended like in PCOView_templ. +----------------------------------------------------------------------------- */ #ifndef _PCO_VIEW_TEMPL_H_ #define _PCO_VIEW_TEMPL_H_ /*==== INCLUDES ===================================================*/ #include "pco_const.h" /*==== DEFINES =====================================================*/ /*==== PROTOTYPES ==================================================*/ /*==== CLASSES =====================================================*/ class PCOView_templ { public: /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::PCOView_templ | +-------------------------------------------------------------------------------+ PURPOSE : initilizes viewer process PARAMS: primq .. name of primitive queue ctrlq .. name of control queue RETURNS: */ PCOView_templ(const char* primq_name="", const char* ctrlq_name=""); virtual ~PCOView_templ(); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::connect | +-------------------------------------------------------------------------------+ PURPOSE : tries to connect with server PARAMS: RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int connect(void); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::subscribe | +-------------------------------------------------------------------------------+ PURPOSE : tries to subscribe for live data from server PARAMS: mobileId .. name of mobile to receive live data from (may be empty) RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int subscribe(const char* mobileId); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::send2srv | +-------------------------------------------------------------------------------+ PURPOSE : tries to send a data buffer to the server PARAMS: buf ... pointer to buffer size .. size of buffer id ... message id RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int send2srv(void* buf, U16 size, U16 id); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::disconnect | +-------------------------------------------------------------------------------+ PURPOSE : tries to disconnect from server PARAMS: RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int disconnect(void); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::unsubscribe | +-------------------------------------------------------------------------------+ PURPOSE : tries to unsubscribe from livedata stream from server PARAMS: RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int unsubscribe(void); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::on_connected | +-------------------------------------------------------------------------------+ PURPOSE : reaction to PCO_CONNECTED from server PARAMS: buf .. data containing server type sender .. server queue name RETURNS: 0 .. server type supported -1 .. server type not supported */ virtual int on_connected(const void *buf,const char* sender); /* +---------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::req_logfile_info | +---------------------------------------------------------------------------------+ PURPOSE : contacts server to request info about a specified logfile PARAMS: fname .. name of logfile (can be full path) RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int req_logfile_info(const char* fname); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::get_logdata | +-------------------------------------------------------------------------------+ PURPOSE : contacts server to request logged data PARAMS: begin, end .. index area requested RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int get_logdata(ULONG begin, ULONG end); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::open_logfile | +-------------------------------------------------------------------------------+ PURPOSE : contacts server to request logged data from a specified logfile PARAMS: fname .. name of logfile (full path) begin, end .. index area requested RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int open_logfile(const char* fname, ULONG begin=0, ULONG end=0); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::set_filter | +-------------------------------------------------------------------------------+ PURPOSE : contacts server to change filter settings PARAMS: list .. '\0'-separated list of names of entitities (terminated by "\0\0") primitives/traces from entities in -list- should not be forwarded prim_trace .. parameter to disable/enable general forwarding of primitives/traces: 0 .. fowarding of everything (default) 1 .. no primitives 2 .. no traces positiv_list .. if true, only primitives/traces from entities in -list- will be forwarded RETURNS: 0 .. sucess -1 .. Server not found -2 .. error while contacting Server */ int set_filter(const char* list, char prim_trace=0, bool positiv_list=false); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::self_send | +-------------------------------------------------------------------------------+ PURPOSE : tries to send a data buffer to the control queue of this viewer PARAMS: buf ... pointer to buffer size .. size of buffer id ... message id RETURNS: 0 .. sucess -1 .. receiver not found -2 .. error while contacting receiver */ int self_send(void* buf, U16 size, U16 id); const char *primq_name() { return m_primq_name;} const char *ctrlq_name() { return m_ctrlq_name;} /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::start_logfile | +-------------------------------------------------------------------------------+ PURPOSE : contacts server to start logging data received in the given queue into the given logfile PARAMS: logfile .. name of the logfile (if no path is given the current server-path is used) queue .. name of the queue the server shall receive data (it will be created by the server) (if no queue is given, m_ctrlq_name+"_LF" is used) RETURNS: 0 .. sucess -1 .. receiver not found -2 .. error while contacting receiver */ int start_logfile(const char* logfile, const char* queue=NULL); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::stop_logfile | +-------------------------------------------------------------------------------+ PURPOSE : contacts server to stop logging data received in the given queue PARAMS: queue .. name of the queue the server received data (if no queue is given, m_ctrlq_name+"_LF" is used) RETURNS: 0 .. sucess -1 .. receiver not found -2 .. error while contacting receiver */ int stop_logfile(const char* queue=NULL); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::send_raw_data | +-------------------------------------------------------------------------------+ PURPOSE : sends raw data to the given queue PARAMS: rawdata .. the data rawsize .. size of rawdata queue .. name of the queue the data will be sent to (if no queue is given, m_ctrlq_name+"_LF" is used) RETURNS: 0 .. sucess -1 .. receiver not found -2 .. error while contacting receiver */ int send_raw_data(const void* rawdata, U16 rawsize, const char* queue=NULL); /* +-------------------------------------------------------------------------------+ | PROJECT : PCO2 MODULE : PCO_VIEW_TEMPL | | STATE : code ROUTINE : PCOView_templ::set_srv_name | +-------------------------------------------------------------------------------+ PURPOSE : change the name of the server queue PARAMS: sname ... new name of server queue */ void set_srv_name(const char* sname); U8 srv_type() const { return m_srv_type;} protected: char m_primq_name[MAX_QNAME_LEN+1],m_ctrlq_name[MAX_QNAME_LEN+1]; char m_srvq_name[MAX_QNAME_LEN+1]; U8 m_srv_type; }; #endif /* _PCO_VIEW_TEMPL_H_ */