FreeCalypso > hg > fc-tourmaline
view src/cs/services/audio/audio_error_hdlr.c @ 220:0ed36de51973
ABB semaphore protection overhaul
The ABB semaphone protection logic that came with TCS211 from TI
was broken in several ways:
* Some semaphore-protected functions were called from Application_Initialize()
context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with
NU_INVALID_SUSPEND in this context, but the return value wasn't checked,
and NU_Release_Semaphore() would be called unconditionally at the end.
The latter call would increment the semaphore count past 1, making the
semaphore no longer binary and thus no longer effective for resource
protection. The fix is to check the return value from NU_Obtain_Semaphore()
and skip the NU_Release_Semaphore() call if the semaphore wasn't properly
obtained.
* Some SPI hardware manipulation was being done before entering the semaphore-
protected critical section. The fix is to reorder the code: first obtain
the semaphore, then do everything else.
* In the corner case of L1/DSP recovery, l1_abb_power_on() would call some
non-semaphore-protected ABB & SPI init functions. The fix is to skip those
calls in the case of recovery.
* A few additional corner cases existed, all of which are fixed by making
ABB semaphore protection 100% consistent for all ABB functions and code paths.
There is still one remaining problem of priority inversion: suppose a low-
priority task calls an ABB function, and some medium-priority task just happens
to preempt right in the middle of that semaphore-protected ABB operation. Then
the high-priority SPI task is locked out for a non-deterministic time until
that medium-priority task finishes its work and goes back to sleep. This
priority inversion problem remains outstanding for now.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 26 Apr 2021 20:55:25 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: audio_error_hdlr.c */ /* */ /* Purpose: This file contains routines used to report unrecoverable */ /* memory errors that might occur. */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------------------------------------------*/ /* 14 May 2001 Create */ /* */ /* Author Francois Mazard - Stephanie Gerthoux */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_AUDIO_MAIN_SWE #ifndef _WINDOWS #include "config/swconfig.cfg" #include "config/sys.cfg" #include "config/chipset.cfg" #endif #include "l1_confg.h" #include "rv/rv_general.h" #include "rvf/rvf_api.h" #include "audio/audio_features_i.h" #include "audio/audio_api.h" #include "audio/audio_error_hdlr_i.h" #include "audio/audio_macro_i.h" /********************************************************************************/ /* */ /* Function Name: audio_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_MESSAGE: { AUDIO_SEND_TRACE("AUDIO entity has received a bad message",RV_TRACE_LEVEL_ERROR); break; } } } /*********************** End of audio_error_trace function **********************/ #if (KEYBEEP) /********************************************************************************/ /* */ /* Function Name: audio_keybeep_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_keybeep_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Keybeep entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Keybeep entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Keybeep entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO Keybeep entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO Keybeep entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } } } #endif /* #if (KEYBEEP) */ /*********************** End of audio_keybeep_error_trace function **********************/ #if (TONE) /********************************************************************************/ /* */ /* Function Name: audio_tones_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_tones_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Tones entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Tones entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Tones entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO Tones entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO Tones entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } } } #endif /* tone */ /*********************** End of audio_tones_error_trace function **********************/ #if (MELODY_E1) /********************************************************************************/ /* */ /* Function Name: audio_melody_E1_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_melody_E1_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_MODE: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity has received a start with a wrong mode",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_ERROR: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity has received wrong file name",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_NO_CLOSE: { AUDIO_SEND_TRACE("AUDIO Melody E1 entity can't close a FFS file ",RV_TRACE_LEVEL_ERROR); break; } } } #endif /* #if (Melody E1) */ #if (MELODY_E2) /********************************************************************************/ /* */ /* Function Name: audio_melody_E2_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 7 December 01 Create */ /* */ /********************************************************************************/ void audio_melody_E2_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_MODE: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has received a start with a wrong mode",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_DOWNLOAD: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has received a download error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_NOT_DOWNLOAD: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has not download the instrument file",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_ERROR: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has received wrong file name",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_NO_CLOSE: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity can't close a FFS file ",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_LOAD_FILE_INSTR_ERROR: { AUDIO_SEND_TRACE("AUDIO Melody E2 entity has received wrong file name to load instruments",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_INSTRUMENT_SIZE: { AUDIO_SEND_TRACE("AUDIO Melody E2 not enough memory for the instrument of this melody",RV_TRACE_LEVEL_ERROR); break; } } } #endif /* #if (Melody E2) */ #if (VOICE_MEMO) /********************************************************************************/ /* */ /* Function Name: audio_voice_memo_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_voice_memo_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_MODE: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity has received a start with a wrong mode",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_ERROR: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity has received wrong file name",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_NO_CLOSE: { AUDIO_SEND_TRACE("AUDIO Voice Memo entity can't close a FFS file",RV_TRACE_LEVEL_ERROR); break; } } } #endif /* #if (Voice Memo) */ #if (L1_VOICE_MEMO_AMR) /********************************************************************************/ /* */ /* Function Name: audio_voice_memo_amr_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_voice_memo_amr_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR not started.",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_BAD_PARAMETER: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_STOP_EVENT: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_START_EVENT: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_MODE: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity has received a start with a wrong mode",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_ERROR: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity has received wrong file name",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_CLOSE: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity can't close a FFS file",RV_TRACE_LEVEL_ERROR); break; case AUDIO_FEATURE_NOT_COMPILED: AUDIO_SEND_TRACE("AUDIO Voice Memo AMR entity: feature not compiled",RV_TRACE_LEVEL_ERROR); break; default: AUDIO_SEND_TRACE_PARAM("AUDIO Voice Memo AMR entity: unknown error", error_id, RV_TRACE_LEVEL_ERROR); break; } } #endif /* #if (Voice Memo AMR) */ #if (MELODY_E1) || (VOICE_MEMO) || (SPEECH_RECO) /********************************************************************************/ /* */ /* Function Name: audio_ffs_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 25 May 01 Create */ /* */ /********************************************************************************/ void audio_ffs_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO FFS entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_SAVED: AUDIO_SEND_TRACE("AUDIO FFS entity can't saved the file in flash",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_CLOSE: AUDIO_SEND_TRACE("AUDIO FFS entity can't close the file",RV_TRACE_LEVEL_ERROR); break; } } #endif /* #if (MELODY_E1) || (VOICE_MEMO) */ #if (AUDIO_NEW_FFS_MANAGER) void audio_new_ffs_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO FFS entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_SAVED: AUDIO_SEND_TRACE("AUDIO FFS entity can't save the file in flash",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_CLOSE: AUDIO_SEND_TRACE("AUDIO FFS entity can't close the file",RV_TRACE_LEVEL_ERROR); break; } } #endif #if (AUDIO_RAM_MANAGER) void audio_ram_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO RAM entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_SAVED: AUDIO_SEND_TRACE("AUDIO RAM entity can't save the file in flash",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_CLOSE: AUDIO_SEND_TRACE("AUDIO RAM entity can't close the file",RV_TRACE_LEVEL_ERROR); break; } } #endif #if (AUDIO_MEM_MANAGER) void audio_mem_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO MEM entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_SAVED: AUDIO_SEND_TRACE("AUDIO MEM entity can't save the file in flash",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_CLOSE: AUDIO_SEND_TRACE("AUDIO MEM entity can't close the file",RV_TRACE_LEVEL_ERROR); break; } } #endif #if (SPEECH_RECO) /********************************************************************************/ /* */ /* Function Name: audio_sr_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 25 May 01 Create */ /* */ /********************************************************************************/ void audio_sr_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Speech reco entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_FILE_ALREADY_EXIST: { AUDIO_SEND_TRACE("AUDIO Speech reco file already exists.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Speech reco entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_STOP_EVENT: { AUDIO_SEND_TRACE("AUDIO Speech reco entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ERROR_START_EVENT: { AUDIO_SEND_TRACE("AUDIO Speech reco entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_SPEECH_NO_SAVED: { AUDIO_SEND_TRACE("AUDIO Speech reco entity can't save the speech sample",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_MODEL_NO_SAVED: { AUDIO_SEND_TRACE("AUDIO Speech reco entity can't save the model sample",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Speech reco entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_DATABASE: { AUDIO_SEND_TRACE("AUDIO Speech reco entity has bad database",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_MODEL_NO_LOAD: { AUDIO_SEND_TRACE("AUDIO Speech reco entity model isn't loaded",RV_TRACE_LEVEL_ERROR); break; } } } #endif /* #if (SPEECH_RECO) */ /********************************************************************************/ /* */ /* Function Name: audio_mode_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 25 May 01 Create */ /* */ /********************************************************************************/ void audio_mode_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: { AUDIO_SEND_TRACE("AUDIO Mode entity not started.",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_NO_MEMORY: { AUDIO_SEND_TRACE("AUDIO Mode entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_BAD_PARAMETER: { AUDIO_SEND_TRACE("AUDIO Mode entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; } case AUDIO_ENTITY_AUDIO_MODE_NO_LOADED: { AUDIO_SEND_TRACE("AUDIO Mode entity: no audio mode was loaded",RV_TRACE_LEVEL_ERROR); break; } } } #if (L1_AUDIO_DRIVER) void audio_driver_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: AUDIO_SEND_TRACE("AUDIO DRIVER entity not started.",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO DRIVER entity: not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_BAD_PARAMETER: AUDIO_SEND_TRACE("AUDIO DRIVER entity: bad parameters",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_STOP_EVENT: AUDIO_SEND_TRACE("AUDIO DRIVER entity: stop error event",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_L1_STOP_EVENT: AUDIO_SEND_TRACE("AUDIO DRIVER entity: stop error event in Layer1",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_START_EVENT: AUDIO_SEND_TRACE("AUDIO DRIVER entity: start error event",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_L1_START_EVENT: AUDIO_SEND_TRACE("AUDIO DRIVER entity: start error event in Layer1",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_MODE: AUDIO_SEND_TRACE("AUDIO DRIVER entity: start with a wrong mode",RV_TRACE_LEVEL_ERROR); break; case AUDIO_FEATURE_NOT_COMPILED: AUDIO_SEND_TRACE("AUDIO DRIVER entity has not been compiled",RV_TRACE_LEVEL_ERROR); break; default: AUDIO_SEND_TRACE_PARAM("AUDIO DRIVER entity: unknow error", error_id, RV_TRACE_LEVEL_ERROR); break; } } #endif #if (L1_MIDI==1) /********************************************************************************/ /* */ /* Function Name: audio_midi_error_trace */ /* */ /* Purpose: This function is used to report error occured during the */ /* audio entity execution */ /* */ /* Input Parameters: */ /* status - Contains the error code to be reported. */ /* */ /* Output Parameters: */ /* None. */ /* */ /* Global Parameters: */ /* None. */ /* */ /* Note: */ /* None. */ /* */ /* Revision History: */ /* 14 May 01 Create */ /* */ /********************************************************************************/ void audio_midi_error_trace(UINT8 error_id) { switch(error_id) { case AUDIO_ENTITY_NOT_START: AUDIO_SEND_TRACE("AUDIO MIDI not started.",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_NO_MEMORY: AUDIO_SEND_TRACE("AUDIO MIDI entity has not enough memory",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_BAD_PARAMETER: AUDIO_SEND_TRACE("AUDIO MIDI entity has bad parameters",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_STOP_EVENT: AUDIO_SEND_TRACE("AUDIO MIDI entity has received a stop error event",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_START_EVENT: AUDIO_SEND_TRACE("AUDIO MIDI entity has received a start error event",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ERROR_MODE: AUDIO_SEND_TRACE("AUDIO MIDI entity has received a start with a wrong mode",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_ERROR: AUDIO_SEND_TRACE("AUDIO MIDI entity has received wrong file name",RV_TRACE_LEVEL_ERROR); break; case AUDIO_ENTITY_FILE_NO_CLOSE: AUDIO_SEND_TRACE("AUDIO MIDI entity can't close a FFS file",RV_TRACE_LEVEL_ERROR); break; case AUDIO_FEATURE_NOT_COMPILED: AUDIO_SEND_TRACE("AUDIO MIDI entity: feature not compiled",RV_TRACE_LEVEL_ERROR); break; default: AUDIO_SEND_TRACE_PARAM("AUDIO MIDI entity: unknown error", error_id, RV_TRACE_LEVEL_ERROR); break; } } #endif // #if (L1_MIDI==1) #endif /* #ifdef RVM_AUDIO_SWE */