view src/g23m-aci/aci/cmh_gmmq.c @ 220:0ed36de51973

ABB semaphore protection overhaul The ABB semaphone protection logic that came with TCS211 from TI was broken in several ways: * Some semaphore-protected functions were called from Application_Initialize() context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with NU_INVALID_SUSPEND in this context, but the return value wasn't checked, and NU_Release_Semaphore() would be called unconditionally at the end. The latter call would increment the semaphore count past 1, making the semaphore no longer binary and thus no longer effective for resource protection. The fix is to check the return value from NU_Obtain_Semaphore() and skip the NU_Release_Semaphore() call if the semaphore wasn't properly obtained. * Some SPI hardware manipulation was being done before entering the semaphore- protected critical section. The fix is to reorder the code: first obtain the semaphore, then do everything else. * In the corner case of L1/DSP recovery, l1_abb_power_on() would call some non-semaphore-protected ABB & SPI init functions. The fix is to skip those calls in the case of recovery. * A few additional corner cases existed, all of which are fixed by making ABB semaphore protection 100% consistent for all ABB functions and code paths. There is still one remaining problem of priority inversion: suppose a low- priority task calls an ABB function, and some medium-priority task just happens to preempt right in the middle of that semaphore-protected ABB operation. Then the high-priority SPI task is locked out for a non-deterministic time until that medium-priority task finishes its work and goes back to sleep. This priority inversion problem remains outstanding for now.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 20:55:25 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the query functions related to the
|             protocol stack adapter for GPRS mobility management ( GMM ).
+----------------------------------------------------------------------------- 
*/ 

#if defined (GPRS) && defined (DTI)

#ifndef CMH_GMMQ_C
#define CMH_GMMQ_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "dti.h"      /* functionality of the dti library */
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "dti_conn_mng.h"

#include "pcm.h"

#include "gaci.h"
#include "gaci_cmh.h"
#include "psa.h"
#include "psa_gmm.h"

#include "cmh.h"
#include "cmh_gmm.h"

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : finished              ROUTINE : qAT_PlusCGATT            |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CGATT? AT
            command which returns the current state of GPRS attachment.
*/

GLOBAL T_ACI_RETURN qAT_PlusCGATT  ( T_ACI_CMD_SRC srcId, T_CGATT_STATE *state )
{
  TRACE_FUNCTION ("qAT_PlusCGATT()");

  if ( !cmh_IsVldCmdSrc (srcId) )
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

  switch ( cmhGMM_Get_state() )
  {
    case AS_ATTACHED:
    case AS_SUSPENTED:
      *state = CGATT_STATE_ATTACHED;
      break;
    case AS_INVALID_STATE:
    case AS_MOBILE_OFF:
    case AS_DETACHED:
    case AS_ATTACHING:
    case AS_DETACHING:
    default:
      *state = CGATT_STATE_DETACHED;
      break;
   }

   return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : code                  ROUTINE : qAT_PlusCGCLASS          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CGCLASS? AT
            command which returns current GACI mobile class.
*/

GLOBAL T_ACI_RETURN qAT_PlusCGCLASS  ( T_ACI_CMD_SRC srcId, T_CGCLASS_CLASS *m_class )
{
   TRACE_FUNCTION ("qAT_PlusCGCLASS()");

/*
 *-------------------------------------------------------------------
 * check command source - should be Serial link ?
 *-------------------------------------------------------------------
 */
   if ( !cmh_IsVldCmdSrc (srcId) ) {
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return( AT_FAIL );
   }

/*
 *-------------------------------------------------------------------
 * fill in parameters
 *-------------------------------------------------------------------
 */
  switch ( gmmShrdPrm.mobile_class )
  {
    case GMMREG_CLASS_A:
      *m_class = CGCLASS_CLASS_A;     /* mobile class A  (highest) */
      break;
    case GMMREG_CLASS_B:
    case GMMREG_CLASS_BC:
    case GMMREG_CLASS_BG:
      *m_class = CGCLASS_CLASS_B;     /* mobile class B */
      break;
    case GMMREG_CLASS_CG:
      *m_class = CGCLASS_CLASS_CG;    /* mobile class CG (GPRS only mode) */
      break;
    case GMMREG_CLASS_CC:
      *m_class = CGCLASS_CLASS_CC;    /* mobile class CC (circuit switched only mode - lowest) */
      break;
    default: /*bad user command */
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
      return AT_FAIL;
  }

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : finished              ROUTINE : qAT_PercentCGAATT        |
+--------------------------------------------------------------------+

  PURPOSE : This command get the mode of automatic attach / detach.
*/

GLOBAL T_ACI_RETURN qAT_PercentCGAATT  ( T_ACI_CMD_SRC srcId, T_CGAATT_ATTACH_MODE *att_m, T_CGAATT_DETACH_MODE *det_m )

{
  TRACE_FUNCTION ("qAT_PercentCGAATT()");  

  *att_m = automatic_attach_mode;
  *det_m = automatic_detach_mode;

  return( AT_CMPL );   
}

GLOBAL T_ACI_RETURN qAT_PlusCGREG( T_ACI_CMD_SRC srcId, T_CGREG_STAT *stat, USHORT *lac, USHORT *ci )
{
  TRACE_FUNCTION ("qAT_PlusCGREG()");

  *stat = gmmShrdPrm.cgreg_stat;
  *lac  = gmmShrdPrm.lac;
  *ci   = gmmShrdPrm.cid;

  return( AT_CMPL );
}

GLOBAL T_ACI_RETURN qAT_PercentCGREG   ( T_ACI_CMD_SRC srcId, T_P_CGREG_STAT *stat, USHORT *lac, USHORT *ci )
{
  TRACE_FUNCTION ("qAT_PercentCGREG()");

  *stat = gmmShrdPrm.p_cgreg_stat;
  *lac  = gmmShrdPrm.lac;
  *ci   = gmmShrdPrm.cid;

  return( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GPRS (8441)           MODULE  : CMH_GMMQ                 |
| STATE   : code                  ROUTINE : qAT_PercentCGCLASS       |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CGCLASS? AT
            command which returns current GPRS mobile class.
*/
GLOBAL T_ACI_RETURN qAT_PercentCGCLASS  ( T_ACI_CMD_SRC srcId, T_PERCENT_CGCLASS *m_class, T_PERCENT_CGCLASS *currentClass )
{
   TRACE_FUNCTION ("qAT_PercentCGCLASS()");

  *m_class = *currentClass = gaciMobileClass.current;
  if( PERCENT_CGCLASS_BX EQ gaciMobileClass.current)
  {
    switch ( gmmShrdPrm.mobile_class )
    {
      case GMMREG_CLASS_BC:
        *currentClass = PERCENT_CGCLASS_BC;
        break;
      case GMMREG_CLASS_BG:
        *currentClass = PERCENT_CGCLASS_BG;
        break;
    }
  }

  return( AT_CMPL );
}
#endif  /* GPRS */
/*==== EOF ========================================================*/