FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/psa_gpppf.c @ 220:0ed36de51973
ABB semaphore protection overhaul
The ABB semaphone protection logic that came with TCS211 from TI
was broken in several ways:
* Some semaphore-protected functions were called from Application_Initialize()
context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with
NU_INVALID_SUSPEND in this context, but the return value wasn't checked,
and NU_Release_Semaphore() would be called unconditionally at the end.
The latter call would increment the semaphore count past 1, making the
semaphore no longer binary and thus no longer effective for resource
protection. The fix is to check the return value from NU_Obtain_Semaphore()
and skip the NU_Release_Semaphore() call if the semaphore wasn't properly
obtained.
* Some SPI hardware manipulation was being done before entering the semaphore-
protected critical section. The fix is to reorder the code: first obtain
the semaphore, then do everything else.
* In the corner case of L1/DSP recovery, l1_abb_power_on() would call some
non-semaphore-protected ABB & SPI init functions. The fix is to skip those
calls in the case of recovery.
* A few additional corner cases existed, all of which are fixed by making
ABB semaphore protection 100% consistent for all ABB functions and code paths.
There is still one remaining problem of priority inversion: suppose a low-
priority task calls an ABB function, and some medium-priority task just happens
to preempt right in the middle of that semaphore-protected ABB operation. Then
the high-priority SPI task is locked out for a non-deterministic time until
that medium-priority task finishes its work and goes back to sleep. This
priority inversion problem remains outstanding for now.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 20:55:25 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the functions for the protocol | stack adapter for GPRS Point-to-Point Protocol ( PPP ). +----------------------------------------------------------------------------- */ #if defined (GPRS) && defined (DTI) #ifndef PSA_GPPPF_C #define PSA_GPPPF_C #endif #include "aci_all.h" #undef TRACING /*==== INCLUDES ===================================================*/ #include "dti.h" /* functionality of the dti library */ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci.h" #include "psa.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "gaci.h" #include "gaci_cmh.h" #include "cmh.h" #include "cmh_sm.h" #include "psa_gppp.h" #include "aci_io.h" #include "psa_uart.h" #include "sap_dti.h" #ifdef FF_PSI #include "psa_psi.h" #include "cmh_psi.h" #include "ati_src_psi.h" #endif /*FF_PSI*/ /*==== CONSTANTS ==================================================*/ /*#define ITM_WDT (14)*/ /* item width in chars */ /*#define HDR_WDT (10)*/ /* header width in chars */ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ EXTERN GLOBAL void cmhGPPP_send_establish_request ( UBYTE peer, UBYTE prot ); /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPF | | STATE : code ROUTINE : psaGPPP_Init | +-------------------------------------------------------------------+ PURPOSE : initialize the protocol stack adapter for PPP. */ /* MACRO: initializer for set parameter */ #ifdef INIT_SET_PARM #undef INIT_SET_PARM #endif #define INIT_SET_PARM( dest, def )\ for( LpCnt = 0; LpCnt < OWN_SRC_MAX; LpCnt++ )\ gpppShrdPrm.setPrm[LpCnt].dest = def GLOBAL void psaGPPP_Init ( UBYTE accm, UBYTE restart_timer, UBYTE max_configure, UBYTE max_terminate, UBYTE max_failure ) { /* *------------------------------------------------------------------- * set default parms *------------------------------------------------------------------- */ gpppShrdPrm.owner = (UBYTE) CMD_SRC_NONE; gpppShrdPrm.ppp_authentication_protocol = PPP_AP_AUTO; gpppShrdPrm.accm = accm; gpppShrdPrm.restart_timer = restart_timer; gpppShrdPrm.max_configure = max_configure; gpppShrdPrm.max_terminate = max_terminate; gpppShrdPrm.max_failure = max_failure; } UBYTE GPPS_First_Stored_Peer = 0; // HHV: Bad hack due to two DTI links in one prim! GLOBAL void psaGPPPS_Dti_Req( T_DTI_CONN_LINK_ID link_id, UBYTE peer ) { T_PDP_CONTEXT_INTERNAL *p_pdp_context_node = NULL; TRACE_FUNCTION("psaGPPPS_Dti_Req()"); p_pdp_context_node = pdp_context_find_node_from_cid( work_cids[0]); switch ( peer ) { #ifdef BT_ADAPTER case DTI_ENTITY_BLUETOOTH: p_pdp_context_node->internal_data.link_id_uart = link_id; dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_BLUETOOTH, 0, 0); dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PPPS, 0, 0); if (GPPS_First_Stored_Peer) { io_setDCD (p_pdp_context_node->internal_data.owner, IO_DCD_ON); cmhGPPP_send_establish_request(GPPS_First_Stored_Peer, DTI_ENTITY_BLUETOOTH); GPPS_First_Stored_Peer = 0; } else { GPPS_First_Stored_Peer = DTI_ENTITY_BLUETOOTH; } break; #endif /* BT_ADAPTER */ case DTI_ENTITY_UART: p_pdp_context_node->internal_data.link_id_uart = link_id; dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_UART, 0, 0); dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PPPS, 0, 0); if (GPPS_First_Stored_Peer) { io_setDCD (p_pdp_context_node->internal_data.owner, IO_DCD_ON); cmhGPPP_send_establish_request(GPPS_First_Stored_Peer, DTI_ENTITY_UART); GPPS_First_Stored_Peer = 0; } else { GPPS_First_Stored_Peer = DTI_ENTITY_UART; } break; #if 0 /* For the 3G protocol stack PPP can not have UPM as peer as all data goes through SNDCP! */ case DTI_ENTITY_UPM: p_pdp_context_node->internal_data.link_id = link_id; dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_UPM, 0, 0); dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PPPS, 0, 0); if (GPPS_First_Stored_Peer) { T_DTI_ENTITY_ID other_peer = dti_cntrl_get_peer(DTI_ENTITY_PPPS, 0, 0); if(DTI_ENTITY_UART EQ other_peer) { io_setDCD (p_pdp_context_node->internal_data.owner, IO_DCD_ON); } cmhGPPP_send_establish_request(GPPS_First_Stored_Peer, DTI_ENTITY_UPM); GPPS_First_Stored_Peer = 0; } else { GPPS_First_Stored_Peer = DTI_ENTITY_UPM; } break; #endif /* 0 */ #ifdef FF_PSI case DTI_ENTITY_PSI: p_pdp_context_node->internal_data.link_id_uart = link_id; dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PSI, 0, 0); dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PPPS, 0, 0); if (GPPS_First_Stored_Peer) { io_setDCD (p_pdp_context_node->internal_data.owner, IO_DCD_ON); cmhGPPP_send_establish_request(GPPS_First_Stored_Peer, DTI_ENTITY_PSI); } else { GPPS_First_Stored_Peer = DTI_ENTITY_PSI; } break; #endif /*FF_PSI*/ case DTI_ENTITY_AAA: p_pdp_context_node->internal_data.link_id_uart = link_id; dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_AAA, 0, 0); dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PPPS, 0, 0); if (GPPS_First_Stored_Peer) { cmhGPPP_send_establish_request(GPPS_First_Stored_Peer, DTI_ENTITY_AAA); GPPS_First_Stored_Peer = 0; } else { GPPS_First_Stored_Peer = DTI_ENTITY_AAA; } break; case DTI_ENTITY_SNDCP: p_pdp_context_node->internal_data.link_id = link_id; dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_SNDCP, 0, 0); dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_PPPS, 0, 0); if (GPPS_First_Stored_Peer) { T_DTI_ENTITY_ID other_peer = dti_cntrl_get_peer(DTI_ENTITY_PPPS, 0, 0); if(DTI_ENTITY_UART EQ other_peer) { io_setDCD (p_pdp_context_node->internal_data.owner, IO_DCD_ON); } cmhGPPP_send_establish_request(GPPS_First_Stored_Peer, DTI_ENTITY_SNDCP); GPPS_First_Stored_Peer = 0; } else { GPPS_First_Stored_Peer = DTI_ENTITY_SNDCP; } break; } } /* +-------------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : PSA_PPPF | | STATE : code ROUTINE : PPP_UART_connect_dti_cb | +-------------------------------------------------------------------------+ PURPOSE : Callback for DTI connection between PPP Server and UART. */ GLOBAL BOOL PPP_UART_connect_dti_cb(UBYTE dti_id, T_DTI_CONN_STATE result_type) { TRACE_FUNCTION("PPP_UART_connect_dti_cb"); switch( result_type) { case DTI_CONN_STATE_DISCONNECTING: break; case DTI_CONN_STATE_DISCONNECTED: dti_cntrl_clear_conn_parms(dti_id); if (dti_cntrl_is_dti_id_to_reconnect(dti_id)) { T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI}; T_DTI_CNTRL info; if (dti_cntrl_get_info_from_dti_id( dti_id, &info) EQ FALSE) { TRACE_EVENT_P1("cannot find info for dti_id=%d", dti_id); return FALSE; } if (info.dev_id EQ DTI_ENTITY_UART) { io_setDCD ((T_ACI_CMD_SRC)info.src_id, IO_DCD_OFF); dti_cntrl_clear_dti_id_to_reconnect(dti_id); dti_cntrl_est_dpath_indirect ( info.src_id, entity_list, 1, SPLIT, atiUART_dti_cb, DTI_CPBLTY_CMD, DTI_CID_NOTPRESENT); } #ifdef FF_PSI else if (info.dev_id EQ DTI_ENTITY_PSI) { io_setDCD ((T_ACI_CMD_SRC)info.src_id, IO_DCD_OFF); dti_cntrl_clear_dti_id_to_reconnect(dti_id); dti_cntrl_est_dpath_indirect ( info.src_id, entity_list, 1, SPLIT, atiPSI_dti_cb, DTI_CPBLTY_CMD, DTI_CID_NOTPRESENT); } #endif /*FF_PSI*/ else return FALSE; } break; case DTI_CONN_STATE_CONNECTING: break; case DTI_CONN_STATE_CONNECTED: break; case DTI_CONN_STATE_ERROR: /* connection not possible: disconnect PPP */ dti_cntrl_close_dpath_from_dti_id(dti_id); break; case DTI_CONN_STATE_UNKNOWN: default: TRACE_EVENT("PPP_UART_connect_dti_cb call with not awaited value"); break; } return TRUE; } #if 0 /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_PPPF | | ROUTINE : psaGPPP_shrPrmDump | +-------------------------------------------------------------------+ PURPOSE : this function dumps the shared parameter to the debug output. */ GLOBAL void psaGPPP_shrPrmDump ( void ) { #ifdef TRACING char lnBuf [80]; /* holds buffer for output line */ char mccBuf[SIZE_MCC + 1]; /* MCC converted to printable C-string */ char mncBuf[SIZE_MNC + 1]; /* MNC converted to printable C-string */ SHORT chrNr; /* holds number of processed chars */ SHORT cnt; /* holds a counter */ /* --- PLMN list ------------------------------------------------*/ for( cnt = 0; cnt<MAX_PLMN_ID AND mmShrdPrm.PLMNLst[cnt].v_plmn NEQ INVLD_PLMN; cnt++ ) { chrNr = sprintf( lnBuf, "%*.*s[%2d]", HDR_WDT, HDR_WDT, " PLMN list",cnt ); utl_BCD2String (mccBuf, mmShrdPrm.PLMNLst[cnt].mcc, SIZE_MCC); utl_BCD2String (mncBuf, mmShrdPrm.PLMNLst[cnt].mnc, SIZE_MNC); chrNr += sprintf( lnBuf+chrNr, "%*s %*s", ITM_WDT/2, ITM_WDT/2, mccBuf, mncBuf); TRACE_EVENT( lnBuf ); } /* --- used PLMN ------------------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " used PLMN" ); if( mmShrdPrm.usedPLMN.v_plmn EQ VLD_PLMN ) { utl_BCD2String (mccBuf, mmShrdPrm.usedPLMN.mcc, SIZE_MCC); utl_BCD2String (mncBuf, mmShrdPrm.usedPLMN.mnc, SIZE_MNC); chrNr += sprintf( lnBuf+chrNr, "%*s %*s", ITM_WDT/2, ITM_WDT/2, mccBuf, mncBuf); } else { chrNr += sprintf( lnBuf+chrNr, "%*s", ITM_WDT, "none" ); } TRACE_EVENT( lnBuf ); /* --- registration mode ----------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "rgstr mode" ); chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT, mmShrdPrm.setPrm[0].regMode ); TRACE_EVENT( lnBuf ); /* --- registration status --------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "rgstr stat" ); chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT, mmShrdPrm.regStat ); TRACE_EVENT( lnBuf ); /* --- search result --------------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, " srch rslt" ); chrNr += sprintf( lnBuf+chrNr, "%*hd", ITM_WDT, mmShrdPrm.srchRslt ); TRACE_EVENT( lnBuf ); /* --- de-registration cause ------------------------------------*/ chrNr = sprintf( lnBuf, "%*.*s", HDR_WDT, HDR_WDT, "dereg caus" ); chrNr += sprintf( lnBuf+chrNr, "%*X", ITM_WDT, mmShrdPrm.deregCs ); TRACE_EVENT( lnBuf ); #endif /* of #ifdef TRACING */ } #endif /* #if 0 */ #endif /* GPRS */ /*==== EOF ========================================================*/