FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/psa_gppps.c @ 220:0ed36de51973
ABB semaphore protection overhaul
The ABB semaphone protection logic that came with TCS211 from TI
was broken in several ways:
* Some semaphore-protected functions were called from Application_Initialize()
context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with
NU_INVALID_SUSPEND in this context, but the return value wasn't checked,
and NU_Release_Semaphore() would be called unconditionally at the end.
The latter call would increment the semaphore count past 1, making the
semaphore no longer binary and thus no longer effective for resource
protection. The fix is to check the return value from NU_Obtain_Semaphore()
and skip the NU_Release_Semaphore() call if the semaphore wasn't properly
obtained.
* Some SPI hardware manipulation was being done before entering the semaphore-
protected critical section. The fix is to reorder the code: first obtain
the semaphore, then do everything else.
* In the corner case of L1/DSP recovery, l1_abb_power_on() would call some
non-semaphore-protected ABB & SPI init functions. The fix is to skip those
calls in the case of recovery.
* A few additional corner cases existed, all of which are fixed by making
ABB semaphore protection 100% consistent for all ABB functions and code paths.
There is still one remaining problem of priority inversion: suppose a low-
priority task calls an ABB function, and some medium-priority task just happens
to preempt right in the middle of that semaphore-protected ABB operation. Then
the high-priority SPI task is locked out for a non-deterministic time until
that medium-priority task finishes its work and goes back to sleep. This
priority inversion problem remains outstanding for now.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 20:55:25 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the signalling functions of the | protocol stack adapter for GPRS Point-to-Point Protocol ( PPP ). +----------------------------------------------------------------------------- */ #if defined (GPRS) && defined (DTI) #ifndef PSA_GPPPS_C #define PSA_GPPPS_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "dti.h" /* functionality of the dti library */ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci.h" #include "psa.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "psa_gppp.h" /*==== CONSTANTS ==================================================*/ #define TOK_STR " =\t" /* string of token delimiter */ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_Establish | +-------------------------------------------------------------------+ PURPOSE : request establishment of PPP connection */ GLOBAL void psaGPPP_Establish ( T_PPP_ESTABLISH_REQ *est_req ) { TRACE_FUNCTION ("psaGPPP_Establish()"); /* *------------------------------------------------------------------- * create and send primitive for establich PPP *------------------------------------------------------------------- */ { PALLOC (ppp_establish_req, PPP_ESTABLISH_REQ); *ppp_establish_req = *est_req; PSEND (hCommPPP, ppp_establish_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_Terminate | +-------------------------------------------------------------------+ PURPOSE : close the PPP connection */ GLOBAL void psaGPPP_Terminate ( UBYTE lower_layer ) { TRACE_FUNCTION ("psaGPPP_Terminate()"); /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ { PALLOC (ppp_terminate_req, PPP_TERMINATE_REQ); /* fill in primitive parameter: registration mode */ ppp_terminate_req -> lower_layer = lower_layer; PSEND (hCommPPP, ppp_terminate_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_PDP_Activate | +-------------------------------------------------------------------+ PURPOSE : the PDP context is activated (only in server mode) */ GLOBAL void psaGPPP_PDP_Activate ( T_NAS_ip * ip, UBYTE *pco_buf, UBYTE pco_length, U8 nsapi) { TRACE_FUNCTION ("psaGPPP_PDP_Activate()"); /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ { PALLOC_SDU (ppp_pdp_activate_res, PPP_PDP_ACTIVATE_RES, (USHORT)(pco_length << 3)); /* Issue OMAPS00047332: SM, SNDCP and UPM are not supporting ppp_hc and msid. * these two parameter should only be removed after * PPP SAP modification. till then reset it to 0. */ ppp_pdp_activate_res->ppp_hc = 0; ppp_pdp_activate_res->msid = 0; #ifdef _SIMULATION_ #pragma message("A check of the IP version is needed before starting a PPP connection.") #endif ppp_pdp_activate_res->ip = ip->ip_address.ipv4_addr.a4[0] << 24; ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[1] << 16; ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[2] << 8; ppp_pdp_activate_res->ip += ip->ip_address.ipv4_addr.a4[3]; ppp_pdp_activate_res->sdu.l_buf = pco_length << 3; ppp_pdp_activate_res->sdu.o_buf = 0; if ( pco_length ) { memcpy(&ppp_pdp_activate_res->sdu.buf, pco_buf, pco_length); } PSEND (hCommPPP, ppp_pdp_activate_res); } } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_PDP_Reject | +-------------------------------------------------------------------+ PURPOSE : the PDP context can't activated (only in server mode) */ GLOBAL SHORT psaGPPP_PDP_Reject ( void ) { TRACE_FUNCTION ("psaGPPP_PDP_Reject()"); /* *------------------------------------------------------------------- * check owner id *------------------------------------------------------------------- */ if(!psa_IsVldOwnId((T_OWN)gpppShrdPrm.owner)) return( -1 ); /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ PSEND (hCommPPP, gpppShrdPrm.setPrm[gpppShrdPrm.owner].pdp_rej); return 0; } /* +-------------------------------------------------------------------+ | PROJECT : GPRS (8441) MODULE : PSA_PPPS | | STATE : finished ROUTINE : psaGPPP_Modification | +-------------------------------------------------------------------+ PURPOSE : negotiate header compression again (only in server mode) */ /* NEEDED ???*/ /* LOCAL SHORT psaGPPP_Modification ( void )*/ /* {*/ /* T_PPP_SET_PRM * pPrmSet; *//* points to used parameter set */ /* TRACE_FUNCTION ("psaGPPP_Modification()");*/ /* *------------------------------------------------------------------- * check owner id *------------------------------------------------------------------- */ /* if(!psa_IsVldOwnId(gpppShrdPrm.owner)) return( -1 ); pPrmSet = &gpppShrdPrm.setPrm[gpppShrdPrm.owner]; */ /* *------------------------------------------------------------------- * create and send primitive for network attach *------------------------------------------------------------------- */ /* { PALLOC (ppp_modification_req, PPP_MODIFICATION_REQ);*/ /* fill in primitive parameter: registration mode */ /* ppp_modification_req -> ppp_hc = pPrmSet -> ppp_hc; ppp_modification_req -> msid = pPrmSet -> msid; PSEND (hCommPPP, ppp_modification_req); } return 0; }*/ #endif /* GPRS */ /*==== EOF ========================================================*/