view src/g23m-fad/fad/fad_sndp.c @ 220:0ed36de51973

ABB semaphore protection overhaul The ABB semaphone protection logic that came with TCS211 from TI was broken in several ways: * Some semaphore-protected functions were called from Application_Initialize() context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with NU_INVALID_SUSPEND in this context, but the return value wasn't checked, and NU_Release_Semaphore() would be called unconditionally at the end. The latter call would increment the semaphore count past 1, making the semaphore no longer binary and thus no longer effective for resource protection. The fix is to check the return value from NU_Obtain_Semaphore() and skip the NU_Release_Semaphore() call if the semaphore wasn't properly obtained. * Some SPI hardware manipulation was being done before entering the semaphore- protected critical section. The fix is to reorder the code: first obtain the semaphore, then do everything else. * In the corner case of L1/DSP recovery, l1_abb_power_on() would call some non-semaphore-protected ABB & SPI init functions. The fix is to skip those calls in the case of recovery. * A few additional corner cases existed, all of which are fixed by making ABB semaphore protection 100% consistent for all ABB functions and code paths. There is still one remaining problem of priority inversion: suppose a low- priority task calls an ABB function, and some medium-priority task just happens to preempt right in the middle of that semaphore-protected ABB operation. Then the high-priority SPI task is locked out for a non-deterministic time until that medium-priority task finishes its work and goes back to sleep. This priority inversion problem remains outstanding for now.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 20:55:25 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-F&D (8411)
|  Modul   :  FAD_SNDP
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the functions for processing
|             of incomming primitives for the component
|             Fax Adaptation 3.45 of the mobile station
+-----------------------------------------------------------------------------
*/

#ifndef FAD_SNDP_C
#define FAD_SNDP_C
#endif

#define ENTITY_FAD

/*==== INCLUDES ===================================================*/

#include <string.h>
#include "typedefs.h"
#include "vsi.h"
#include "macdef.h"
#include "pconst.cdg"
#include "custom.h"
#include "gsm.h"
#include "cnf_fad.h"
#include "mon_fad.h"
#include "prim.h"
#include "pei.h"
#include "tok.h"
#include "ccdapi.h"
#include "fad.h"

/*==== CONST =======================================================*/

/*==== TYPES =======================================================*/

/*==== VAR EXPORT ==================================================*/

/*==== VAR LOCAL ===================================================*/

/*==== FUNCTIONS ===================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)             MODULE  : FAD_SNDP            |
| STATE   : code                       ROUTINE : snd_ra_ready_ind    |
+--------------------------------------------------------------------+

  PURPOSE : Process primitive RA_READY_IND received from RA.

*/

GLOBAL void snd_ra_ready_ind (T_RA_READY_IND *ra_ready_ind)
{
  USHORT bytes_to_send;

#ifdef _SIMULATION_
  TRACE_FUNCTION ("snd_ra_ready_ind()");
  PACCESS        (ra_ready_ind);
#endif

  if (GET_STATE(KER) EQ KER_NULL)
  {
#ifdef _SIMULATION_
    PFREE (ra_ready_ind);
#endif
    return;
  }

  bytes_to_send = ra_ready_ind->req_frames * FRAME_SIZE;

  if ((GET_STATE (SND) NEQ SYNC_SND) AND fad_data->snd.reset)
  {
    snd_SendReset (bytes_to_send);
#ifdef _SIMULATION_
    PFREE (ra_ready_ind);
#endif
    return;
  }

  switch (GET_STATE (SND))
  {
    case SYNC_SND:
      sbm_free_empty_prims();
      snd_SendSequence (bytes_to_send, FR_SYNC);
      break;

    case PREAM_SND:
      if (!snd_SendSequence(bytes_to_send, FR_STATUS))
      {
/*
        TRACE_EVENT ("BCS-REC:PREAM sent - start HDLC");
*/
        SET_STATE (SNDSUB, SUB_DATA);
#ifdef _SIMULATION_
        snd_BuildStatusFrames(fad_data->snd.fad_data_req, BCS_BUF_LEN);
#else
        snd_BuildStatusFrames(fad_data->snd.fad_data_req);
#endif
        SET_STATE (SND, BCS_SND);
      }
      break;

    case BCS_SND:
      if (GET_STATE (SNDSUB) NEQ SUB_DATA)
        break;

#ifdef _SIMULATION_
      snd_SendBcsData(bytes_to_send);
#else
      snd_SendBcsData();
#endif
      if (!fad_data->snd.data_to_send)
      {
        if (fad_data->snd.fad_data_req->sdu.l_buf)
        {
#ifdef _SIMULATION_
          snd_BuildStatusFrames(fad_data->snd.fad_data_req, BCS_BUF_LEN);
#else
          snd_BuildStatusFrames(fad_data->snd.fad_data_req);
#endif
        }
        else
        {
/*
          TRACE_EVENT ("BCS-REC:HDLC sent");
*/
          SET_STATE (SNDSUB, SUB_IDLE);
          PFREE (fad_data->snd.fad_data_req);
          fad_data->snd.fad_data_req = NULL;
          sig_snd_ker_data_sent_ind ();
        }
      }
      break;

    case TCF_SND:
      if (!(snd_SendSequence(bytes_to_send, FR_T4DATA)))
      {
        sig_snd_ker_data_sent_ind ();
/*
        TRACE_EVENT ("MSG-REC:TCF sent");
*/
      }
      break;

    case TRAIN_SND:
    case TRAIN_CNF_SND:
      snd_SendSequence (bytes_to_send, FR_TRAIN);
      break;

    case MSG_SND:
      sbm_free_empty_prims();

      if (GET_STATE (SNDSUB) EQ SUB_IDLE)   /* 1st MSG block < threshold */
      {
        if (!fad_data->snd.final)
          if (fad_data->snd.data_to_send < fad_data->snd.threshold)
          {
            snd_SendSequence (bytes_to_send, FR_TRAIN);
            break;
          }
        SET_STATE (SNDSUB, SUB_DATA);
      }
      if (fad_data->snd.final)
      {
        if (!snd_SendMsgData (ra_ready_ind->req_frames))
        {
          TRACE_EVENT ("MSG-REC:DATA sent");
          SET_STATE (SNDSUB, SUB_IDLE);
          sig_snd_ker_data_sent_ind ();
#ifdef _SIMULATION_
          snd_SendSequence(bytes_to_send, FR_SYNC);
#endif
        }
      }
      else
      {
        /* FINAL flag not set */

        if (!snd_SendMsgData (ra_ready_ind->req_frames))
        {
          TRACE_EVENT ("MSG-REC:DATA buffer underflow");
          sig_rcv_ker_error_ind (ERR_LOCAL_DATA_MSG_UFL);
        }
        if (    fad_data->snd.send_ready_to_t30
            AND fad_data->snd.data_to_send < fad_data->snd.threshold)
          {
            sig_snd_ker_ready_ind ();
            fad_data->snd.send_ready_to_t30 = FALSE;
          }
      }
      break;

    default:
      break;
  }

#ifdef _SIMULATION_
  PFREE (ra_ready_ind);
#endif
}