FreeCalypso > hg > fc-tourmaline
view src/g23m-gsm/alr2/alr_trc.c @ 220:0ed36de51973
ABB semaphore protection overhaul
The ABB semaphone protection logic that came with TCS211 from TI
was broken in several ways:
* Some semaphore-protected functions were called from Application_Initialize()
context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with
NU_INVALID_SUSPEND in this context, but the return value wasn't checked,
and NU_Release_Semaphore() would be called unconditionally at the end.
The latter call would increment the semaphore count past 1, making the
semaphore no longer binary and thus no longer effective for resource
protection. The fix is to check the return value from NU_Obtain_Semaphore()
and skip the NU_Release_Semaphore() call if the semaphore wasn't properly
obtained.
* Some SPI hardware manipulation was being done before entering the semaphore-
protected critical section. The fix is to reorder the code: first obtain
the semaphore, then do everything else.
* In the corner case of L1/DSP recovery, l1_abb_power_on() would call some
non-semaphore-protected ABB & SPI init functions. The fix is to skip those
calls in the case of recovery.
* A few additional corner cases existed, all of which are fixed by making
ABB semaphore protection 100% consistent for all ABB functions and code paths.
There is still one remaining problem of priority inversion: suppose a low-
priority task calls an ABB function, and some medium-priority task just happens
to preempt right in the middle of that semaphore-protected ABB operation. Then
the high-priority SPI task is locked out for a non-deterministic time until
that medium-priority task finishes its work and goes back to sleep. This
priority inversion problem remains outstanding for now.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 20:55:25 +0000 |
parents | 3a14ee9a9843 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS | Modul : ALR_TRC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines functions for the offline trace +----------------------------------------------------------------------------- */ #ifndef ALR_TRC_C #define ALR_TRC_C #define ENTITY_PL /*==== INCLUDES ===================================================*/ #include <string.h> #include <stdlib.h> #include <ctype.h> #include "typedefs.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "cnf_alr.h" #include "mon_alr.h" #include "pei.h" #include "tok.h" #include "pcm.h" #ifdef GPRS #include "alr_gprs.h" #endif #include "alr.h" #if defined (ALR_TRACE_ENABLED) /* * The ALR Trace is a cyclic buffer for * debugging ALR problems. * * The buffer will be initialized at startup and will * be filled by the function alr_trc_dl_trace() until it is full. * The size of the buffer is ALR_TRC_SIZE. * * The content is * * actual_channel * State * sysclock * L2 data * * During IDLE mode (triggered by RX_PERIODIC_IND in ALR/TIL_main.c) * an output is written to the _PL.dbg (ALR_TRC_MAX_READED traces each trigger) */ /* prototypes */ void alr_trc_clear (void); #define ALR_TRC_SIZE 90 #define ALR_TRC_MAX_READED 8 #if (((ALR_TRC_SIZE-1) & (~ALR_TRC_SIZE)) == (ALR_TRC_SIZE-1)) #define POWER_OF_2 #pragma message("ALR_TRC_SIZE is power of 2") #else #pragma message("ALR_TRC_SIZE is NOT power of 2") #endif typedef struct { UCHAR event; UCHAR state; UCHAR actual_channel; USHORT sysclock; UCHAR data [ALR_TRC_DATA_SIZE]; } T_IDLE_TRACE_DATA; T_IDLE_TRACE_DATA alr_csIDLE_Trace_buffer [ALR_TRC_SIZE]; USHORT alr_csIDLE_Trace_index = 0; USHORT alr_csIDLE_Trace_read_index = 0; static T_HANDLE sem_ALR_TRC; #define ENTER_CRITICAL_SECTION(sem) if (alr_trc_enter_critical_section(sem))return; #define LEAVE_CRITICAL_SECTION(sem) if (alr_trc_leave_critical_section(sem))return; /* +-----------------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_semaphore_err | +-----------------------------------------------------------------------------+ PURPOSE : Handles semaphore error situation */ static void alr_trc_semaphore_err (void) { static UCHAR out = 0; if (!out) { out = 1; vsi_o_ttrace(VSI_CALLER TC_EVENT, "semaphore error"); } }//endfunc alr_trc_dl_trace_cs_err /* +-----------------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_enter_critical_section | +-----------------------------------------------------------------------------+ PURPOSE : Enters critical section */ static int alr_trc_enter_critical_section (T_HANDLE sem) { if (vsi_s_get (VSI_CALLER sem) NEQ VSI_OK) { alr_trc_semaphore_err(); return -1; } else { return 0; } }//endfunc alr_trc_enter_critical_section /* +-----------------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_leave_critical_section | +-----------------------------------------------------------------------------+ PURPOSE : Leaves critical section */ static int alr_trc_leave_critical_section (T_HANDLE sem) { if (vsi_s_release (VSI_CALLER sem) NEQ VSI_OK) { alr_trc_semaphore_err(); return -1; } else { return 0; } }//endfunc alr_trc_leave_critical_section /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_init | +--------------------------------------------------------------------+ PURPOSE : Init tracing */ void alr_trc_init (void) { sem_ALR_TRC = vsi_s_open (VSI_CALLER "ALR_IDLE_TRACE",1); if (sem_ALR_TRC NEQ VSI_ERROR) alr_trc_clear (); else vsi_o_ttrace(VSI_CALLER TC_EVENT, "canīt open semaphore \"ALR_IDLE_TRACE\""); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_exit | +--------------------------------------------------------------------+ PURPOSE : Close tracing */ void alr_trc_exit (void) { if (sem_ALR_TRC NEQ VSI_ERROR) vsi_s_close (VSI_CALLER sem_ALR_TRC); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_clear | +--------------------------------------------------------------------+ PURPOSE : Clears trace index */ void alr_trc_clear (void) { ENTER_CRITICAL_SECTION (sem_ALR_TRC); alr_csIDLE_Trace_index = alr_csIDLE_Trace_read_index = 0; LEAVE_CRITICAL_SECTION (sem_ALR_TRC); vsi_o_ttrace(VSI_CALLER TC_EVENT, "IDLE_Trace_index reseted"); } #if 0 static void alr_trc_sleep_mode (void) { static UCHAR sleep_mode_disabled = FALSE; if (!sleep_mode_disabled) { #define NO_SLEEP 0 #define ARMIO_CLK 0x0001 #define UWIRE_CLK 0x0020 #define SIM_CLK 0x0040 #define UART_CLK 0x0400 #if defined (_TARGET_) #if !defined( GPRS ) power_down_config(NO_SLEEP, ARMIO_CLK | UWIRE_CLK | SIM_CLK | UART_CLK); #endif #endif /* _TARGET_ */ sleep_mode_disabled = TRUE; } }//endfunc alr_trc_sleep_mode #endif /* 0|1 */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_store | +--------------------------------------------------------------------+ PURPOSE : Fill in a trace. */ void alr_trc_store (UCHAR event, UCHAR actual_channel, UCHAR state, void* data) { T_IDLE_TRACE_DATA* trace_data; USHORT write_index; USHORT length; T_TIME sysClock; #if 0 { USHORT semCount; if (vsi_s_status (VSI_CALLER sem_ALR_TRC, &semCount) NEQ VSI_OK) { alr_trc_semaphore_err(); return; } if (semCount EQ 0) { vsi_o_ttrace(VSI_CALLER TC_EVENT, "semCount == 0"); return; } } #endif /* 0|1 */ ENTER_CRITICAL_SECTION (sem_ALR_TRC); #if defined(POWER_OF_2) write_index = (alr_csIDLE_Trace_index + 1) & (ALR_TRC_SIZE - 1); /* if ALR_TRC_SIZE power of 2 */ #else write_index = (alr_csIDLE_Trace_index + 1) % ALR_TRC_SIZE; /* if ALR_TRC_SIZE not power of 2 */ #endif /* POWER_OF_2 */ if (write_index NEQ alr_csIDLE_Trace_read_index) {/* buffer is not full */ trace_data = &alr_csIDLE_Trace_buffer[alr_csIDLE_Trace_index]; trace_data->event = event; if (actual_channel >= ALR_TRC_CH_UNKNOWN) trace_data->actual_channel = ALR_TRC_CH_UNKNOWN; else trace_data->actual_channel = actual_channel; trace_data->state = state; vsi_t_time (VSI_CALLER &sysClock); trace_data->sysclock = (USHORT)sysClock; if (event EQ ALR_TRC_DOWNLINK OR event EQ ALR_TRC_UPLINK) length = 23; else length = ALR_TRC_DATA_SIZE; if (event EQ ALR_TRC_STRING) strncpy ((char*)trace_data->data, (char*)data, length); else memcpy (trace_data->data, (UCHAR*)data, length); alr_csIDLE_Trace_index = write_index; }/* endif buffer is not full */ LEAVE_CRITICAL_SECTION (sem_ALR_TRC); }/* endfunc alr_trc_store */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : ALT_TRC | | STATE : code ROUTINE : alr_trc_read | +--------------------------------------------------------------------+ PURPOSE : Read and output stored trace. */ void alr_trc_read_all (void) { USHORT write_index, read_index; ENTER_CRITICAL_SECTION (sem_ALR_TRC); write_index = alr_csIDLE_Trace_index; read_index = alr_csIDLE_Trace_read_index; LEAVE_CRITICAL_SECTION (sem_ALR_TRC); while (read_index NEQ write_index) { alr_trc_read (20); vsi_t_sleep(VSI_CALLER 0); ENTER_CRITICAL_SECTION (sem_ALR_TRC); write_index = alr_csIDLE_Trace_index; read_index = alr_csIDLE_Trace_read_index; LEAVE_CRITICAL_SECTION (sem_ALR_TRC); } }/* endfunc alr_trc_dl_trace_read_all */ static const char * ALR_TRC_CHANNEL[7] = { " ", "Ff", "Fh", "S4", "S8", "SA", "??" }; static const char * ALR_TRC_EVENTS[4] = { "UL", "DL", "Ev", "ev" }; void alr_trc_read (int count) { T_IDLE_TRACE_DATA trace_data; USHORT write_index, read_index; static char buffer[ALR_TRC_DATA_SIZE*2+50]; UCHAR j, o, readed = 0; ENTER_CRITICAL_SECTION (sem_ALR_TRC); write_index = alr_csIDLE_Trace_index; read_index = alr_csIDLE_Trace_read_index; LEAVE_CRITICAL_SECTION (sem_ALR_TRC); #if 0 if (read_index EQ write_index) { alr_trc_sleep_mode (); return; } #endif /* 0|1 */ while (read_index NEQ write_index) { ENTER_CRITICAL_SECTION (sem_ALR_TRC); trace_data = alr_csIDLE_Trace_buffer[read_index]; alr_csIDLE_Trace_buffer[read_index].sysclock = 0xffff; /* readed */ alr_csIDLE_Trace_read_index++; #if defined(POWER_OF_2) alr_csIDLE_Trace_read_index&= (ALR_TRC_SIZE-1); /* if power of 2 */ #else alr_csIDLE_Trace_read_index%= ALR_TRC_SIZE; /* if not power of 2 */ #endif /* POWER_OF_2 */ read_index = alr_csIDLE_Trace_read_index; LEAVE_CRITICAL_SECTION (sem_ALR_TRC); sprintf (buffer, "[%03d]:%05d %d %s %s ", #if defined(POWER_OF_2) (write_index - read_index) & (ALR_TRC_SIZE-1), /* if ALR_TRC_SIZE power of 2 */ #else (ALR_TRC_SIZE + write_index - read_index) % ALR_TRC_SIZE, /* if ALR_TRC_SIZE not power of 2 */ #endif /* POWER_OF_2 */ trace_data.sysclock, trace_data.state, ALR_TRC_EVENTS[trace_data.event], ALR_TRC_CHANNEL[trace_data.actual_channel]); o = strlen (buffer); switch (trace_data.event) { case ALR_TRC_STRING: strncpy (buffer+o, (char*)&trace_data.data[0], ALR_TRC_DATA_SIZE); buffer[o+ALR_TRC_DATA_SIZE] = 0; break; case ALR_TRC_DOWNLINK: case ALR_TRC_UPLINK: for (j=0;j<23;j++, o+=2) { sprintf (buffer+o, "%02x", trace_data.data[j]); } break; default: for (j=0;j<ALR_TRC_DATA_SIZE;j++, o+=2) { sprintf (buffer+o, "%02x", trace_data.data[j]); } break; } if (buffer[0]) { vsi_o_ttrace(VSI_CALLER TC_EVENT, buffer); } else { vsi_o_ttrace(VSI_CALLER TC_EVENT, "alr_trc_read() failed"); } ENTER_CRITICAL_SECTION (sem_ALR_TRC); write_index = (UCHAR)alr_csIDLE_Trace_index; LEAVE_CRITICAL_SECTION (sem_ALR_TRC); if (++readed >= count) break; }/* endwhile */ }//endfunc alr_trc_read */ #else /* ALR_TRACE_ENABLED */ #endif /* ALR_TRACE_ENABLED */ #endif /* ALR_TRC_C */