view src/g23m-gsm/cc/cc_ffk.c @ 220:0ed36de51973

ABB semaphore protection overhaul The ABB semaphone protection logic that came with TCS211 from TI was broken in several ways: * Some semaphore-protected functions were called from Application_Initialize() context. NU_Obtain_Semaphore() called with NU_SUSPEND fails with NU_INVALID_SUSPEND in this context, but the return value wasn't checked, and NU_Release_Semaphore() would be called unconditionally at the end. The latter call would increment the semaphore count past 1, making the semaphore no longer binary and thus no longer effective for resource protection. The fix is to check the return value from NU_Obtain_Semaphore() and skip the NU_Release_Semaphore() call if the semaphore wasn't properly obtained. * Some SPI hardware manipulation was being done before entering the semaphore- protected critical section. The fix is to reorder the code: first obtain the semaphore, then do everything else. * In the corner case of L1/DSP recovery, l1_abb_power_on() would call some non-semaphore-protected ABB & SPI init functions. The fix is to skip those calls in the case of recovery. * A few additional corner cases existed, all of which are fixed by making ABB semaphore protection 100% consistent for all ABB functions and code paths. There is still one remaining problem of priority inversion: suppose a low- priority task calls an ABB function, and some medium-priority task just happens to preempt right in the middle of that semaphore-protected ABB operation. Then the high-priority SPI task is locked out for a non-deterministic time until that medium-priority task finishes its work and goes back to sleep. This priority inversion problem remains outstanding for now.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 20:55:25 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CC_FFK
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This Modul defines the functions called by the primitive
|             processing functions of the SDL process FORMATTER.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CC_FFK_C
#define CC_FFK_C

#define ENTITY_CC
/*==== INCLUDES ===================================================*/

#include <string.h>
#include "typedefs.h"
#include "pcm.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "message.h"
#include "ccdapi.h"
#include "prim.h"
#include "cnf_cc.h"
#include "mon_cc.h"
#include "pei.h"
#include "tok.h"
#include "cc.h"

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : CC_FFK                     |
| STATE   : code                ROUTINE : for_check_called_party_bcd |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a called party bcd information
            element.

*/

GLOBAL BOOL for_check_called_party_bcd (UBYTE ton, UBYTE npi)
{
  TRACE_FUNCTION ("for_check_called_party_bcd()");

  /*
   * Check numbering type
   */
  if (ton <= M_CC_TON_DEDICATED)
  {
    /*
     * Check numbering plan
     */
    switch (npi)
    {
      case M_CC_NPI_UNKNOWN:
      case M_CC_NPI_ISDN:
      case M_CC_NPI_X121:
      case M_CC_NPI_F69:
      case M_CC_NPI_NATIONAL:
      case M_CC_NPI_PRIVATE:
        return TRUE;
      default:
        break;
    }
  }
  return FALSE;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : CC_FFK                     |
| STATE   : code                ROUTINE : for_check_called_party_sub |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a called party sub information
            element.

*/

GLOBAL BOOL for_check_called_party_sub (T_M_CC_called_subaddr * called_subaddr)
{
  TRACE_FUNCTION ("for_check_called_party_sub()");

  switch (called_subaddr->tos)
  {
    case M_CC_TOS_NSAP:
    case M_CC_TOS_USER:
      return TRUE;
    default:
      return FALSE;
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : CC_FFK                     |
| STATE   : code                ROUTINE : for_check_calling_party_bcd|
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a calling party bcd information
            element.

*/

GLOBAL BOOL for_check_calling_party_bcd (T_M_CC_calling_num * calling_num)
{
  TRACE_FUNCTION ("for_check_calling_party_bcd()");

  /*
   * Check numbering type
   */
  if (calling_num->ton <= M_CC_TON_DEDICATED)
  {
    /*
     * Check numbering plan
     */
    switch (calling_num->npi)
    {
      case M_CC_NPI_UNKNOWN:
      case M_CC_NPI_ISDN:
      case M_CC_NPI_X121:
      case M_CC_NPI_F69:
      case M_CC_NPI_NATIONAL:
      case M_CC_NPI_PRIVATE:
        break;
      default:
        return FALSE;
    }
    /*
     * Check Present Indicator
     */
    if (calling_num->v_present AND
        (calling_num->present > M_CC_PRES_NOT_AVAIL))
      return FALSE;
    else
      return TRUE;
  }
  return FALSE;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_check_calling_party_sub |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a calling party sub information
            element.

*/

GLOBAL BOOL for_check_calling_party_sub (T_M_CC_calling_subaddr * calling_subaddr)
{
  TRACE_FUNCTION ("for_check_calling_party_sub()");

  switch (calling_subaddr->tos)
  {
    case M_CC_TOS_NSAP:
    case M_CC_TOS_USER:
      return TRUE;
    default:
      return FALSE;
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : CC_FFK                     |
| STATE   : code                ROUTINE : for_check_callstate        |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a callstate information
            element.

*/

GLOBAL void for_check_call_state (T_M_CC_call_state * call_state)
{
  TRACE_FUNCTION ("for_check_call_state()");

  if ( call_state->cs NEQ M_CC_CS_GSM_PLMN )        /* VK 04-jul-97 */
    call_state->state = M_CC_CS_10;                 /* VK 04-jul-97 */
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_check_cc_cause          |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a cc cause information
            element.

*/

GLOBAL BOOL for_check_cc_cause (T_M_CC_cc_cause* cc_cause)
{
  TRACE_FUNCTION ("for_check_cc_cause()");
//TISH patch for OMAPS00129223
#if 0
  /* 
   * this is a (dirty) "trick" to detect that the cause IE was not present
   * although mandatory (for some messages): value 0 is reserved, i.e. it is not 
   * expected that it will be sent by a network; CCD/the frame ensures that the 
   * memory contents is 0 which will be seen as value if the cause IE was not present
   */
  if (cc_cause->cause EQ 0)
    return FALSE;
#endif
  /* 
   * coding standards other than GSM are not supported (which is a valid option);
   * map the cause value to interworking, unspecified then, skip further checks
   */
  if (cc_cause->cs NEQ M_CC_CS_GSM_PLMN )
  {
    cc_cause->cause = M_CC_CAUSE_INTERWORKING;
    return TRUE;
  }

  /* check for reserved Location (octet 3) */
  switch (cc_cause->loc)
  {
    case M_CC_LOC_USER:
    case M_CC_LOC_PRIV_NET_LOCAL_USER:
    case M_CC_LOC_PUB_NET_LOCAL_USER:
    case M_CC_LOC_TRANSIT_NET:
    case M_CC_LOC_PRIV_NET_REMOTE_USER:
    case M_CC_LOC_PUB_NET_REMOTE_USER:
    case M_CC_LOC_INTERNATIONAL_NET:
    case M_CC_LOC_BEYOND_POINT:
      break;
    default:
      return FALSE;
  }

  /* check Recommendation (octet 3a) */
  /* 
   * the condition below also checks the value of octet 3a (if present);
   * this stems from GSM 04.08 of Ph1 were the value 1 was defined as indicating
   * GSM; since Ph2 there is the requirement that octet 3a shall not be included
   * for coding standard being equal to GSM; however, the design decision is
   * to keep the Ph1 behaviour in order to be a "tolerant" MS and to avoid
   * interworking problems with Ph1 infrastructure, especially as this case is
   * not treated in GSM 09.90
   */
  if (cc_cause->v_rec AND
      (cc_cause->rec NEQ 1))
    return FALSE;
  else
    return TRUE;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_check_progress_indicator|
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a progress indicator information
            element.

*/

GLOBAL BOOL for_check_progress_indicator (T_M_CC_progress * progress)
{
  TRACE_FUNCTION ("for_check_progress_indicator()");

  /* coding standard and progress description are not in optional octets (3 and 4) */
  if ((progress->v_cs EQ FALSE) OR
      (progress->v_progress_desc EQ FALSE))
    return FALSE;

  /* 
   * map progress description to "Unspecific" if coding standard other than
   * GSM is used; note that it is an option to not support coding standards
   * other than GSM (which Condat takes)
   */
  if (progress->cs NEQ M_CC_CS_GSM_PLMN)
  {
    progress->progress_desc = MNCC_PROG_UNSPECIFIC; 
    return TRUE; /* don't care about reserved values for Location anymore of other standards */
  }

  /* check for reserved Location values */
  switch (progress->loc)
  {
    case M_CC_LOC_USER:
    case M_CC_LOC_PRIV_NET_LOCAL_USER:
    case M_CC_LOC_PUB_NET_LOCAL_USER:
    case M_CC_LOC_PRIV_NET_REMOTE_USER:
    case M_CC_LOC_PUB_NET_REMOTE_USER:
    case M_CC_LOC_BEYOND_POINT:
      break;
    default:
      return FALSE;
  }

  return TRUE;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_check_repeat_indicator  |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a repeat indicator information
            element.

*/

GLOBAL BOOL for_check_repeat_indicator (UBYTE repeat)
{
  TRACE_FUNCTION ("for_check_repeat_indicator()");

  if ((repeat EQ M_CC_REPEAT_CIRCULAR)
       OR
      (repeat EQ M_CC_REPEAT_SEQUENTIAL)
     )
    return TRUE;
  else
    return FALSE;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_check_signal            |
+--------------------------------------------------------------------+

  PURPOSE : Checks the content of a signal information
            element.

*/

GLOBAL BOOL for_check_signal (UBYTE signal)
{
  TRACE_FUNCTION ("for_check_signal()");

  if ((signal <= M_CC_SIGNAL_HOOK_OFF_ON)
       OR
      (signal EQ  M_CC_SIGNAL_TONES_OFF)
       OR
      (signal EQ M_CC_SIGNAL_ALERT_OFF))
    return TRUE;
  else
    return FALSE;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_set_conditional_error   |
+--------------------------------------------------------------------+

  PURPOSE : Stores a detected conditional error.

*/

GLOBAL void for_set_conditional_error (UBYTE       iei)
{
  GET_INSTANCE_DATA;
  TRACE_FUNCTION ("for_set_conditional_error()");

  switch (cc_data->error)
  {
    case M_CC_CAUSE_INFO_ELEM_NOT_IMPLEM:
    case M_CC_CAUSE_INVALID_MAND_INFO:
      break;

    default:
      cc_data->error = M_CC_CAUSE_COND_INFO_ELEM;
      if (cc_data->error_count < MAX_ERROR_TAGS)
        cc_data->error_inf [cc_data->error_count++] = iei;
      break;
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_set_mandatory_error     |
+--------------------------------------------------------------------+

  PURPOSE : Stores a detected mandatory error.

*/

GLOBAL void for_set_mandatory_error ( UBYTE       iei)
{
  GET_INSTANCE_DATA;
  TRACE_FUNCTION ("for_set_mandatory_error()");

  switch (cc_data->error)
  {
    case M_CC_CAUSE_INFO_ELEM_NOT_IMPLEM:
    case M_CC_CAUSE_COND_INFO_ELEM:
      cc_data->error_count = 0;
      /*FALLTHROUGH*/ /*lint -fallthrough*/

    default:
      cc_data->error = M_CC_CAUSE_INVALID_MAND_INFO;
      if (cc_data->error_count < MAX_ERROR_TAGS)
        cc_data->error_inf [cc_data->error_count++] = iei;
      break;
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)      MODULE  : CC_FFK                      |
| STATE   : code               ROUTINE : for_set_optional_error      |
+--------------------------------------------------------------------+

  PURPOSE : Stores a detected optional error.

*/

GLOBAL void for_set_optional_error ( UBYTE       iei)
{
  GET_INSTANCE_DATA;
  TRACE_FUNCTION ("for_set_optional_error()");

  switch (cc_data->error)
  {
  case M_CC_CAUSE_INVALID_MAND_INFO:
       break;

    case M_CC_CAUSE_COND_INFO_ELEM:
      cc_data->error_count = 0;
      /*FALLTHROUGH*/ /*lint -fallthrough*/

    default:
      /*
       * Check whether the iei is compression required
       */
      if ((iei & 0xF0) EQ 0)
        for_set_mandatory_error (iei);
      else
      {
        cc_data->error = M_CC_CAUSE_INFO_ELEM_NOT_IMPLEM;
        if (cc_data->error_count < MAX_ERROR_TAGS)
          cc_data->error_inf [cc_data->error_count++] = iei;
      }
      break;
  }
}

/*
+--------------------------------------------------------------------+
| | STATE   : code                ROUTINE : cc_check_critical_error    |
+--------------------------------------------------------------------+

  PURPOSE : This function checks wheter a critical error has been 
            detected in the air message. Critical errors which prevent 
            the treatment of an air message are 
            - invalid Message ID
            - mandatory IE missing
            - IE coded as comprehension required missing
*/

GLOBAL BOOL cc_check_critical_error (UBYTE cc_err)
{
  TRACE_FUNCTION ("cc_check_critical_error ()");
  if (cc_err  EQ M_CC_CAUSE_INVALID_MAND_INFO       OR 
      cc_err  EQ M_CC_CAUSE_MESSAGE_TYPE_NOT_IMPLEM OR
      cc_err  EQ M_CC_CAUSE_COND_INFO_ELEM          OR
      cc_err  EQ M_CC_CAUSE_SERVICE_NOT_IMPLEM        )
  return (TRUE);
  else
  return (FALSE);
}

#endif