view src/cs/services/atp/Bti_at.h @ 267:10b3a6876273

fc-target.h preprocessor symbols: introduce CONFIG_TARGET_LEO_RFFE Out of our currently existing supported targets, Leonardo and Tango use TI's classic Leonardo RFFE wiring. However, we would like to use the same quadband RFFE with the same classic wiring on our FreeCalypso Libre Dumbphone handset, and also on the planned development board that will serve as a stepping stone toward that goal. Therefore, we introduce the new CONFIG_TARGET_LEO_RFFE preprocessor symbol, and conditionalize on this symbol in tpudrv12.h, instead of a growing || of different targets.
author Mychaela Falconia <falcon@freecalypso.org>
date Wed, 09 Jun 2021 07:26:51 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
 *
 * File Name : bti_at.h
 *
 * Common definition used by GSM PS and BT PS 
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.1      Date : 02-Jan-2001
 *
 ******************************************************************************/


#ifndef BTI_AT_H
#define BTI_AT_H



/* Acknowledgment */
typedef enum
{
  BTI_NAK   = 0, /* failure */
  BTI_ACK   = 1  /* success */
}T_BTI_ACK;

/* Port Number */
typedef unsigned char  T_BTI_PORT_NB;

/* Custom information provided by GSM when opening a port */
typedef struct 
{
	unsigned long optimal_gsm_max_packet_size; 
	// GSM indicates in this parameter the best maximum packet size that should be used by BT
	// 0 means do not care
} T_BTI_GSM_PORT_INFO; // Information provided by GSM related to the port 


/* Custom information provided by BT when opening a port */
typedef struct 
{
	unsigned long optimal_bt_max_packet_size;
	// BT indicates in this parameter the best maximum packet size that should be used by GSM
	// 0 means do not care
} T_BTI_BT_PORT_INFO; // Information provided by BT related to the port

/* Ring type */
typedef enum
{
  BTI_AT_RING_NotPresent, /* no bearer cap available */
  BTI_AT_RING_Async, /* transparent data */
  BTI_AT_RING_Sync, /* currently not used */
  BTI_AT_RING_RelAsync, /* non transparent data */
  BTI_AT_RING_RelSync, /* currently not used */
  BTI_AT_RING_Fax,
  BTI_AT_RING_Voice,
  BTI_AT_RING_AuxVoice,
  BTI_AT_RING_GPRS
}T_BTI_AT_RING_TYPE;

/* Line status information from DCE (ie GSM) */
typedef unsigned char  T_BTI_AT_DCE_SIGNAL;
#define BTI_AT_RING_OFF (0)
#define BTI_AT_RING_ON (1)
#define BTI_AT_RING_MASK (1)
#define BTI_AT_DCD_OFF (0)
#define BTI_AT_DCD_ON (2)
#define BTI_AT_DCD_MASK (2)

#endif