FreeCalypso > hg > fc-tourmaline
view src/cs/services/atp/atp_uart_api.c @ 267:10b3a6876273
fc-target.h preprocessor symbols: introduce CONFIG_TARGET_LEO_RFFE
Out of our currently existing supported targets, Leonardo and Tango
use TI's classic Leonardo RFFE wiring. However, we would like to
use the same quadband RFFE with the same classic wiring on our
FreeCalypso Libre Dumbphone handset, and also on the planned
development board that will serve as a stepping stone toward that
goal. Therefore, we introduce the new CONFIG_TARGET_LEO_RFFE
preprocessor symbol, and conditionalize on this symbol in tpudrv12.h,
instead of a growing || of different targets.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Wed, 09 Jun 2021 07:26:51 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/********************************************************************************/ /* */ /* File Name: atp_uart_api.c */ /* */ /* Purpose: This file contains the external functions related to */ /* the ATP-UART interface. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved. */ /* */ /********************************************************************************/ #include "atp/atp_uart_i.h" #include "rvm/rvm_use_id_list.h" /********************************************************************************/ /* */ /* Function Name: atp_uart_open_com_port */ /* */ /* Purpose: This function instructs the ATP-UART interface to open */ /* the COM port. */ /* */ /* Input Parameters: */ /* com_port - Contains the COM port number. */ /* baud_rate - Contains the baud rate (in bits per second). */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_open_com_port (T_ATP_UART_COM_PORT com_port, T_ATP_UART_BAUD_RATE baud_rate) { /* Declare a local variable. */ T_ATP_UART_OPEN_COM_PORT *open_com_port_p = NULL; /******************** atp_uart_open_com_port function begins ********************/ /* Allocate memory required to instruct the ATP-UART interface to open the */ /* COM port. If insufficient resources, then report an internal memory */ /* error and abort. */ if (rvf_get_buf (gbl_atp_uart_ctrl_blk_p->mb_id, \ sizeof (T_ATP_UART_OPEN_COM_PORT), \ (T_RVF_BUFFER **) (&open_com_port_p)) == RVF_RED) { rvf_send_trace (" ATP-UART (api). Insufficient resources ", 41, NULL_PARAM, RV_TRACE_LEVEL_WARNING, ATP_USE_ID); return (RV_MEMORY_ERR); } /* Fill the 'ATP-UART Open COM Port' header up. */ (open_com_port_p->os_header).msg_id = ATP_UART_OPEN_COM_PORT; (open_com_port_p->os_header).src_addr_id = RVF_INVALID_ADDR_ID; (open_com_port_p->os_header).callback_func = NULL; /* Fill the 'ATP-UART Open COM Port' payload up. */ open_com_port_p->com_port = com_port; open_com_port_p->baud_rate = baud_rate; /* Send the 'ATP-UART Open COM Port' notification to the ATP-UART */ /* interface. */ return (rvf_send_msg (gbl_atp_uart_ctrl_blk_p->addr_id, \ open_com_port_p)); } /******************* End of atp_uart_open_com_port function *******************/ /********************************************************************************/ /* */ /* Function Name: atp_uart_start_gsm */ /* */ /* Purpose: This function instructs the ATP-UART interface to */ /* initiate using the GSM protocol stack. */ /* */ /* Input Parameters: None. */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: The GSM protocol stack is initialized by invoking the */ /* following AT commands: */ /* AT+CFUN=1 : Set Phone Functionality (Full), */ /* AT+COPS=0 : Operator Selection. */ /* */ /* Revision History: */ /* 09/26/02 Pascal Pompei */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_start_gsm (void) { /* Declare a local variable. */ T_ATP_UART_START_GSM *start_gsm_p = NULL; /********************** atp_uart_start_gsm function begins **********************/ /* Allocate memory required to instruct the ATP-UART interface to initiate */ /* using the GSM protocol stack. If insufficient resources, then report an */ /* internal memory error and abort. */ if (rvf_get_buf (gbl_atp_uart_ctrl_blk_p->mb_id, \ sizeof (T_ATP_UART_START_GSM), \ (T_RVF_BUFFER **) (&start_gsm_p)) == RVF_RED) { rvf_send_trace (" ATP-UART (api). Insufficient resources ", 41, NULL_PARAM, RV_TRACE_LEVEL_WARNING, ATP_USE_ID); return (RV_MEMORY_ERR); } /* Fill the 'ATP-UART Start GSM' header up. */ (start_gsm_p->os_header).msg_id = ATP_UART_START_GSM; (start_gsm_p->os_header).src_addr_id = RVF_INVALID_ADDR_ID; (start_gsm_p->os_header).callback_func = NULL; /* Send the 'ATP-UART Start GSM' notification to the ATP-UART interface. */ return (rvf_send_msg (gbl_atp_uart_ctrl_blk_p->addr_id, \ start_gsm_p)); } /********************* End of atp_uart_start_gsm function *********************/