FreeCalypso > hg > fc-tourmaline
view src/cs/services/dar/dar_const_i.h @ 267:10b3a6876273
fc-target.h preprocessor symbols: introduce CONFIG_TARGET_LEO_RFFE
Out of our currently existing supported targets, Leonardo and Tango
use TI's classic Leonardo RFFE wiring. However, we would like to
use the same quadband RFFE with the same classic wiring on our
FreeCalypso Libre Dumbphone handset, and also on the planned
development board that will serve as a stepping stone toward that
goal. Therefore, we introduce the new CONFIG_TARGET_LEO_RFFE
preprocessor symbol, and conditionalize on this symbol in tpudrv12.h,
instead of a growing || of different targets.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Wed, 09 Jun 2021 07:26:51 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/****************************************************************************/ /* */ /* File Name: dar_const_i.h */ /* */ /* Purpose: Internal constants used by DAR instance */ /* */ /* */ /* Version 0.1 */ /* */ /* Date Modification */ /* ------------------------------------ */ /* 26 Septembre 2001 Create */ /* */ /* Author Stephanie Gerthoux */ /* */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ #include "rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE #ifndef __DAR_CONST_I_H_ #define __DAR_CONST_I_H_ #include "config/chipset.cfg" #ifdef __cplusplus extern "C" { #endif /* Define a mask used to identify the events */ #define DAR_EVENT_EXTERN (0x0C00) #define DAR_EVENT_INTERN (0x0300) /* The DAR task run without any time out */ #define DAR_NOT_TIME_OUT (0) /* The DAR entity processes only the messages send to the following mail box */ #define DAR_MBOX (RVF_TASK_MBOX_0) /* The DAR entity takes into account only the following events: */ #define DAR_TASK_MBOX_EVT_MASK (RVF_TASK_MBOX_0_EVT_MASK) /* The DAR entity waits all event type */ #define DAR_ALL_EVENT_FLAGS (0xFFFF) /* The DAR use max group elements used */ #define DAR_MAX_GROUP_NB (4) /* RAM max buffer size */ #define DAR_MAX_BUFFER_SIZE (3000) /* Recovery data max buffer size */ #define DAR_RECOVERY_DATA_MAX_BUFFER_SIZE (50) /* Dar invalid value */ #define DAR_INVALID_VALUE (0xFFFF) /* Dar initialization */ #define DAR_INITIALIZATION_VALUE (0x0000) /* Define the Watchdog timer register mode */ #define WATCHDOG_TIM_MODE (0xFFFFF804) #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11)) /* Define the Debug Unit register mode */ #define DAR_DEBUG_UNIT_REGISTER (0x03C00000) #elif (CHIPSET == 12) /* Define the Debug Unit register mode */ #define DAR_DEBUG_UNIT_REGISTER (0x09F00000) #endif /* Mask to enable the Debug Unit Module */ #define ENABLE_DU_MASK (0xF7FF) /* Mask to disable the Debug Unit Module */ #define DISABLE_DU_MASK (0x0800) /* Extra Control register CONF Adress */ #define DAR_DU_EXTRA_CONTROL_REG (0xFFFFFB10) /* Define the size of the Debug Unit register */ /* This size is 64 words of 32 bits = 64*4 bytes */ /* Size in bytes */ #define DEBUG_UNIT_BYTES_SIZE (256) /* Define the size in words */ #define DEBUG_UNIT_WORD_SIZE (64) /* Define the size of the X_dump _buffer */ /* This size is specified in the gsm_cs_amd4_lj3_test.cmd (in "system" directory) */ /* Its size is 38*32 bits = 38*4 bytes = 152 bytes */ #define DAR_X_DUMP_BUFFER_SIZE (152) /* Define the exceptions */ #define DAR_NO_ABORT_EXCEPTION (0) #define DAR_EXCEPTION_DATA_ABORT (1) #define DAR_EXCEPTION_PREFETCH_ABORT (2) #define DAR_EXCEPTION_UNDEFINED (3) #define DAR_EXCEPTION_SWI (4) #define DAR_EXCEPTION_RESERVED (5) #ifdef __cplusplus } #endif #endif /* __DAR_CONST_I_H_ */ #endif /* #ifdef RVM_DAR_SWE */