FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/psa_l2rs.c @ 267:10b3a6876273
fc-target.h preprocessor symbols: introduce CONFIG_TARGET_LEO_RFFE
Out of our currently existing supported targets, Leonardo and Tango
use TI's classic Leonardo RFFE wiring. However, we would like to
use the same quadband RFFE with the same classic wiring on our
FreeCalypso Libre Dumbphone handset, and also on the planned
development board that will serve as a stepping stone toward that
goal. Therefore, we introduce the new CONFIG_TARGET_LEO_RFFE
preprocessor symbol, and conditionalize on this symbol in tpudrv12.h,
instead of a growing || of different targets.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Wed, 09 Jun 2021 07:26:51 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_L2RS +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the signalling functions of the | protocol stack adapter for layer 2 relay. +----------------------------------------------------------------------------- */ #ifdef DTI #ifndef PSA_L2RS_C #define PSA_L2RS_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "dti.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci.h" #include "psa.h" #include "psa_l2r.h" #include "cmh.h" #include "aci_fd.h" #include "cmh_ra.h" #include "cmh_l2r.h" #include "psa_uart.h" #if defined (FF_WAP) || defined (FF_GPF_TCPIP) || defined (FF_SAT_E) #include "wap_aci.h" #include "psa_ppp_w.h" #endif /* defined (FF_WAP) || defined (FF_GPF_TCPIP) */ #include "aci_lst.h" #include "aci_lst.h" #ifdef FF_PSI #include "psa_psi.h" #include "cmh_psi.h" #include "ati_src_psi.h" #endif /*FF_PSI*/ #include "psa_util.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_L2R | | ROUTINE : psaL2R_Activate | +-------------------------------------------------------------------+ PURPOSE : Activate L2R. */ GLOBAL SHORT psaL2R_Activate(UBYTE owner) { #define X l2rShrdPrm.set_prm[owner] TRACE_FUNCTION ("psaL2R_Activate()"); /* owner belongs to PSA and not to CMH */ l2rShrdPrm.owner = owner; switch (l2rShrdPrm.state) { case L2R_DEACTIVATED: { PALLOC (l2r_activate_req, L2R_ACTIVATE_REQ); l2r_activate_req->k_ms_iwf = X.k_ms_iwf; l2r_activate_req->k_iwf_ms = X.k_iwf_ms; l2r_activate_req->t1 = X.t1; l2r_activate_req->t2 = L2R_T2_DEF; l2r_activate_req->n2 = X.n2; l2r_activate_req->pt = L2R_PT_DEF; l2r_activate_req->p0 = X.p0; l2r_activate_req->p1 = X.p1; l2r_activate_req->p2 = X.p2; l2r_activate_req->uil2p = X.uil2p; l2r_activate_req->bytes_per_prim = L2R_BYTES_PER_PRIM_DEF; l2r_activate_req->buffer_size = L2R_BUFFER_SIZE_DEF; l2r_activate_req->rate = X.rate; l2rShrdPrm.set_prm[l2rShrdPrm.owner].reset = 0; memcpy (&X, &l2rShrdPrm.set_prm_use, sizeof (T_L2R_SET_PRM)); l2rShrdPrm.state = L2R_ACTIVATE; PSENDX (L2R, l2r_activate_req); break; } default: { cmhL2R_Failure(); return -1; } } return 0; #undef X } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_L2R | | ROUTINE : psaL2R_Deactivate | +-------------------------------------------------------------------+ PURPOSE : Deactivate L2R. */ GLOBAL SHORT psaL2R_Deactivate(void) { TRACE_FUNCTION ("psaL2R_Deactivate()"); switch (l2rShrdPrm.state) { case L2R_ENABLED: { T_DTI_CONN_LINK_ID link_id = dti_cntrl_get_link_id( DTI_ENTITY_L2R, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT ); PALLOC (l2r_dti_req, L2R_DTI_REQ); l2r_dti_req->dti_conn = L2R_DISCONNECT_DTI; l2rShrdPrm.uart_conn = L2R_DISCONNECT_DTI; l2r_dti_req->link_id = link_id; l2rShrdPrm.state = L2R_DETACH; PSENDX (L2R, l2r_dti_req); break; } case L2R_CONNECTED: case L2R_ENABLE: case L2R_ACTIVATE: case L2R_CONNECT: { PALLOC (l2r_deactivate_req, L2R_DEACTIVATE_REQ); l2rShrdPrm.state = L2R_DEACTIVATE; PSENDX (L2R, l2r_deactivate_req); break; } /* Changed for OMAPS00049111 */ #if defined (FF_SAT_E) || defined (_SIMULATION_) case L2R_DEACTIVATED: return -1; #endif /* FF_SAT_E */ } return 0; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_L2R | | ROUTINE : psaL2R_Enable | +-------------------------------------------------------------------+ PURPOSE : Enable L2R. */ GLOBAL SHORT psaL2R_Enable( T_DTI_CONN_LINK_ID link_id, UBYTE peer ) { UBYTE dti_id = EXTRACT_DTI_ID( link_id ); TRACE_EVENT ("psaL2R_Enable()"); switch (l2rShrdPrm.state) { case L2R_CONNECTED: { PALLOC (l2r_dti_req, L2R_DTI_REQ); l2r_dti_req->dti_conn = L2R_CONNECT_DTI; l2rShrdPrm.uart_conn = L2R_CONNECT_DTI; l2r_dti_req->link_id = link_id; l2rShrdPrm.state = L2R_ENABLE; #if defined (FF_WAP) || defined (FF_GPF_TCPIP) || defined (FF_SAT_E) if (Wap_Call) { strcpy((char*)l2r_dti_req->entity_name, PPP_NAME); l2r_dti_req->dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER; } else { #endif /* FF_WAP OR FF_GPF_TCPIP or SAT E */ if (IS_SRC_BT(dti_id)) { TRACE_EVENT("psa_l2rs - BT_ADAPTER Act"); strcpy((char*)l2r_dti_req->entity_name, BTI_NAME); l2r_dti_req->dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER; } else if ((peer EQ DTI_ENTITY_PPPC) OR (peer EQ DTI_ENTITY_AAA) #ifdef FF_SAT_E OR (peer EQ DTI_ENTITY_SIM) #endif /* FF_SAT_E */ ) { strcpy((char*)l2r_dti_req->entity_name, dti_entity_name[peer].name); l2r_dti_req->dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER; } else { if (peer EQ DTI_ENTITY_UART) strcpy((char*)l2r_dti_req->entity_name,UART_NAME); else strcpy((char*)l2r_dti_req->entity_name,PSI_NAME); l2r_dti_req->dti_direction = DTI_CHANNEL_TO_LOWER_LAYER; } #if defined (FF_WAP) || defined (FF_GPF_TCPIP) || defined (FF_SAT_E) } #endif /* FF_WAP || FF_GPF_TCPIP || SAT E */ if (dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_L2R, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE) { return -1; } PSENDX (L2R, l2r_dti_req); break; } case L2R_ENABLE: { PALLOC (l2r_disc_req, L2R_DISC_REQ); l2rShrdPrm.state = L2R_DISCONNECT; cmhL2R_Failure(); PSENDX (L2R, l2r_disc_req); break; } case L2R_ACTIVATE: case L2R_CONNECT: { PALLOC (l2r_deactivate_req, L2R_DEACTIVATE_REQ); l2rShrdPrm.state = L2R_DEACTIVATE; cmhL2R_Failure(); PSENDX (L2R, l2r_deactivate_req); break; } default: { cmhL2R_Failure(); return -1; } } return 0; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_L2R | | ROUTINE : psaL2R_Disable | +-------------------------------------------------------------------+ PURPOSE : Disable L2R. */ /* Not sure whether this function is needed or not !! GLOBAL SHORT psaL2R_Disable(void) { TRACE_FUNCTION ("psaL2R_Disable()"); switch (l2rShrdPrm.state) { case L2R_ENABLED: { PALLOC (l2r_dti_req, L2R_DTI_REQ); l2r_dti_req->dti_conn = L2R_DISCONNECT_DTI; l2rShrdPrm.uart_conn = L2R_DISCONNECT_DTI; l2rShrdPrm.state = L2R_DISABLE; PSENDX (L2R, l2r_dti_req); break; } case L2R_CONNECTED: case L2R_ENABLE: { PALLOC (l2r_disc_req, L2R_DISC_REQ); l2rShrdPrm.state = L2R_DISCONNECT; cmhL2R_Failure(); PSENDX (L2R, l2r_disc_req); break; } case L2R_ACTIVATE: case L2R_CONNECT: { PALLOC (l2r_deactivate_req, L2R_DEACTIVATE_REQ); l2rShrdPrm.state = L2R_DEACTIVATE; cmhL2R_Failure(); PSENDX (L2R, l2r_deactivate_req); break; } default: { cmhL2R_Failure(); return -1; } } return 0; } */ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_L2R | | ROUTINE : psaL2R_ESC | +-------------------------------------------------------------------+ PURPOSE : ESC. */ GLOBAL SHORT psaL2R_ESC( UBYTE src_id ) { #ifdef FF_PSI T_ACI_DTI_PRC_PSI *src_infos = find_element (psi_src_params, src_id, cmhPSItest_srcId); #endif /*FF_PSI*/ TRACE_EVENT ("psaL2R_ESC()"); switch (l2rShrdPrm.state) { case L2R_ENABLED: { T_DTI_ENTITY_ID entity_list[] = {DTI_ENTITY_ACI}; #ifdef FF_PSI if (src_infos NEQ NULL) dti_cntrl_est_dpath_indirect ( src_id, entity_list, 1, SPLIT, atiPSI_dti_cb, DTI_CPBLTY_CMD, DTI_CID_NOTPRESENT); else #endif /*FF_PSI*/ dti_cntrl_est_dpath_indirect ( src_id, entity_list, 1, SPLIT, atiUART_dti_cb, DTI_CPBLTY_CMD, DTI_CID_NOTPRESENT); l2rShrdPrm.state = L2R_ESCAPE; break; } case L2R_CONNECTED: case L2R_ENABLE: { PALLOC (l2r_disc_req, L2R_DISC_REQ); l2rShrdPrm.state = L2R_DISCONNECT; cmhL2R_Failure(); PSENDX (L2R, l2r_disc_req); break; } case L2R_ACTIVATE: case L2R_CONNECT: { PALLOC (l2r_deactivate_req, L2R_DEACTIVATE_REQ); l2rShrdPrm.state = L2R_DEACTIVATE; cmhL2R_Failure(); PSENDX (L2R, l2r_deactivate_req); break; } default: { cmhL2R_Failure(); break; } } return 0; } #endif /* DTI */ /*==== EOF ========================================================*/