FreeCalypso > hg > fc-tourmaline
view doc/C139-notes @ 266:160a5b3a076c
new ABB_SLEEP_RESTRICTION definition in fc-target.h
When we first introduced the mechanism to suppress ABB superdeep sleep
on targets with LCDs powered from Iota VRIO, we made it conditional on
CONFIG_TARGET_LUNA. This conditional is now being generalized: the
feature in question is now conditionalized on the new ABB_SLEEP_RESTRICTION
preprocessor symbol, to be defined in targets/*.h for those targets
that need it. The new ABB_SLEEP_RESTRICTION definition is being added
to targets/luna[12].h to keep the actual logic unchanged.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Wed, 02 Jun 2021 02:12:14 +0000 |
parents | a62e5bf88434 |
children |
line wrap: on
line source
FC Tourmaline firmware differs from Magnetite in two principal ways when it comes to Mot C139 target support: * C139 LCD support is implemented in a more forward-looking manner: instead of emulating TI's C-Sample at the lowest R2D driver level and therefore being forever limited to 84x48 pixel display size, Tourmaline implements a new 96x64 pixel framebuffer, matching the native LCD size of C1xx phones. The UI configuration is still black&white only though - the Mother of FreeCalypso has no current plans to support color UI on smaller LCD sizes than TI's original 176x220 pix. * Our aftermarket FFS configuration has been changed from 64x3 at 0x3C0000 to 64x7 at 0x300000. Our earlier 64x3 config was chosen back in 2015, at that time we didn't know how much room we would end up needing for the firmware image vs. how much FFS content we would eventually have, and this 64x3 config is now deemed to be too small, allowing only one 64 KiB sector for FFS content. Our new FC Tourmaline aftermarket FFS config supports up to 320 KiB of FFS content, matches what we use on other platforms with 4 MiB flash chips, leaves 3 MiB for the firmware image (our current smallbw UI fw is only 2 MiB), and still avoids intersection with Motorola's (or rather Compal's) original FFS, which is important for avoiding problems in converting C139 phones back and forth between Motorola and FreeCalypso firmwares.