FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/sap/rrgrr.pdf @ 288:25d3ee009d19
audio tone amplitudes: band-aid fix for FC Luna
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 05:02:57 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rrgrr.pdf ;*** Creation : Wed Mar 11 09:58:45 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : rrgrr ;*** Document No. : 8441.112.03.031 ;*** Document Date : 2003-11-19 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SAB ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:52:28 2007" PRAGMA LAST_MODIFIED "2003-11-19" PRAGMA ID_AND_VERSION "8441.112.03.031" CONST RRGRR_MAX_ARFCN_NCELL_SYNC_REQ 12 ; maximum number of frequencies to be synchronised for cell re-selection and EOTD CONST RRGRR_MAX_ARFCN_EXT_MEAS 64 ; maximum number of frequencies during Extended Measurement CONST RRGRR_MEAS_REP_LIST_SIZE 7 %!REL99 OR !TI_PS_FF_EMR% ; Measurement report list size (1 serving and 6 neighbour cells) CONST RRGRR_BA_LIST_SIZE 32 ; BA list size CONST SIZE_MCC 3 ; maximum number of BCD digits of the mobile country code CONST SIZE_MNC 3 ; maximum number of BCD digits of the mobile network code CONST RRGRR_MAX_RSLT_NCELL_SYNC_IND 12 %REL99 AND TI_PS_FF_EMR% ; maximum number of results of synchronisation attempts for cell re-selection CONST RRGRR_MAX_RSLT_NCELL_SYNC_IND 6 %!REL99 OR !TI_PS_FF_EMR% ; maximum number of results of synchronisation attempts for cell re-selection CONST RRGRR_MEAS_REP_LIST_SIZE 33 %REL99 AND TI_PS_FF_EMR% ; Measurement report list size (1 serving and 32 neighbour cells) CONST MAX_NUM_OF_RTD_VALUES 3 ; Maximum number of RTD values for an ARFCN VALTAB VAL_cause VAL 0 GPRS_NOT_SUPPORTED "Serving cell does not support GPRS" VAL 1 GPRS_SUPPORTED "Serving cell supports GPRS" VAL 2 GPRS_CELL_NOT_SUITABLE "for GRR-controlled cell reselection" VALTAB VAL_si_to_read VAL 0 UNSPECIFIED_SI "Update of unspecified SI message or SI messages" VAL 1 UPDATE_SI1 "Update of SI1 message" VAL 2 UPDATE_SI2_SI2BIS_OR_SI2TER "Update of SI2, SI2 bis or SI2 ter message" VAL 3 UPDATE_SI3_SI4_SI7_OR_SI8 "Update of SI3, SI4, SI7 or SI8 message" VAL 4 UPDATE_SI9 "Update of SI9 message" VAL 5 COMPLETE_SI "Read complete SI" VAL 255 UPDATE_SI13 "Update or read of SI13" VALTAB VAL_si1_state VAL 0 SI1_NOT_SEND "SI not send" VAL 1 SI1_RECEIVED "SI received" VAL 2 SI1_NOT_RECEIVED "SI not received" VALTAB VAL_si3_state VAL 0 SI3_NOT_SEND "SI not send" VAL 1 SI3_RECEIVED "SI received" VAL 2 SI3_NOT_RECEIVED "SI not received" VALTAB VAL_si13_state VAL 0 SI13_NOT_SEND "SI not send" VAL 1 SI13_RECEIVED "SI received" VAL 2 SI13_NOT_RECEIVED "SI not received" VALTAB VAL_pg_type VAL 0 RRGRR_IMSI "MS is paged by IMSI" VAL 1 RRGRR_PTMSI "MS is paged by PTMSI (GPRS TMSI)" VALTAB VAL_rr_est VAL 0 RR_EST_NOT_ALLOWED "RR establishment not allowed" VAL 1 RR_EST_ALLOWED "RR establishment allowed" VALTAB VAL_ecsc %REL99% VAL 0 ECS_FORBIDDEN "Early classmark sending forbidden in the cell" VAL 1 ECS_ALLOWED "Early classmark sending allowed in the cell" VALTAB VAL_susp_req VAL 0 SUSPENSION_REQ_NOT_NEEDED "RR need not send GPRS suspension request" VAL 1 SUSPENSION_REQ_NEEDED "RR has to send GPRS suspension request" VALTAB VAL_r_bit VAL 0 CHAN_REQ_SENT_ONCE "MS has sent channel request only once" VAL 1 CHAN_REQ_SENT_MORE "MS has sent channel request twice or more" VALTAB VAL_old_ptmsi VAL 0xFFFFFFFF RRGRR_PTMSI_INVALID "P-TMSI or TMSI invalid (see GSM 3.03)" VALTAB VAL_stop_cause VAL 3 CONTENTION_RESOLUTION_FAIL "Establishment fails due to contention resolution" VAL 4 DL_ESTABLISHMENT_FAIL "Layer 2 establishment failure" VALTAB VAL_arfcn VAL 1 - 124 "GSM 900 without extension band" VAL 1 - 174 "GSM 900 with extension band" VAL 512 - 810 "PCS 1900" VAL 512 - 885 "DCS 1800" VAL 1 - 498 "Dual band(GSM/DCS)" VAL 1 - 548 "Dual band(EGSM/DCS)" VAL 0xFFFF RRGRR_INVALID_ARFCN "Used to mark a channel number entry as invalid." VALTAB VAL_sb_flag VAL 0 NO_SB_FOUND "synchronisation burst not found" VAL 1 SB_FOUND "synchronisation burst found" VAL 2 SB_UNKNOWN "status of synchronisation burst unknown" VALTAB VAL_bsic VAL 0 - 63 "base station identification code" VAL 255 RRGRR_INVALID_BSIC "Used to identify a BSIC entry as invalid" VALTAB VAL_cr_type VAL 0 CR_NEW "RR has to reselect the given cell" VAL 1 CR_COMPLETE "RR has to camp on this cell" VAL 2 CR_CONT "Continue cell reselection." VAL 3 CR_CS "start cell selection process again" VAL 4 CR_NEW_NOT_SYNCED "start cr for not syncd cell (ie. PCCO)" VAL 124 CR_SUSPENDED_IDLE "start idle procedures" VAL 125 CR_REQ_CANDIDATE "inform GRR that is has to start a CR" VAL 126 CR_NORMAL "Do not abort TBF" VAL 127 CR_ABNORMAL "Abort TBF" VALTAB VAL_sync_res VAL 0 SYNC_OK "Synchronisation OK" VAL 1 SYNC_FAILED "Synchronisation failed" VALTAB VAL_cell_type VAL 0 SYNC_SCELL "Synchronisation to serving cell" VAL 1 SYNC_NCELL "Synchronisation to neighbour cell" VALTAB VAL_pag_mode VAL 0 PAG_MODE_LAST_ONE "RR shall use the last page (before pag_Reorg)" VAL 1 PAG_MODE_REORG "RR shall use Paging reorg mode" VAL 2 PAG_MODE_PTM_NP "RR shall use the NORMAL paging in packet transfer mode, start only CCCH" VAL 3 PAG_MODE_PIM_NP "RR shall start only CCCH with REORG and change to NORMAL paging" VAL 255 PAG_MODE_DEFAULT "RR shall use the default paging mode and goes to idle mode" VALTAB VAL_split_pg VAL 704 RRGRR_NO_DRX "Non DRX mode" VALTAB VAL_rac VAL 0xFF RRGRR_RAC_INVALID "routing area code invalid" VALTAB VAL_reconn_state VAL 0 RECONN_OK "The reconnection to the 'old' channel was cuessful" VAL 1 RECONN_LOW_FAIL "A Lower Layer Failure occured during the reconnection." VALTAB VAL_reconn_cause VAL 0b00000000 RECONN_NORM_EVENT "Normal event" VAL 0b00000001 RECONN_UNSPECIFIED "Abnormal release, unspecified" VAL 0b00000010 RECONN_CHN_UNACCEPTABLE "Abnormal release, channel unacceptable" VAL 0b00000011 RECONN_TIMER_EXPIRED "Abnormal release, timer expired" VAL 0b00000100 RECONN_NO_ACTIVITY "Abnormal release, no activity on the radio path" VAL 0b00000101 RECONN_PREEMPTIVE "Preemptive release" VAL 0b00001000 RECONN_TA_OUT_OF_RANGE "Handover impossible, timing advance out of range" VAL 0b00001001 RECONN_CHANNEL_MODE "Channel mode unacceptable" VAL 0b00001010 RECONN_FREQ_NOT_IMPL "Frequency not implemented" VAL 0b01000001 RECONN_CALL_CLEARED "Call already cleared" VAL 0b01011111 RECONN_INCORRECT_SEMANTIC "Semantically incorrect message" VAL 0b01100000 RECONN_INVALID_INFO "Invalid mandatory information" VAL 0b01100001 RECONN_UNKNWN_MSG_TYPE "Message type non-existent or not implemented" VAL 0b01100010 RECONN_INCMPTBLE_MSG_TYPE "Message type not compatible with protocol state" VAL 0b01100100 RECONN_COND_IE_ERROR "Conditional IE error" VAL 0b01100101 RECONN_NO_CELL_ALLOC "No cell allocation available" VAL 0b01101111 RECONN_PROT_UNSPECIFIED "Protocol error unspecified" VALTAB VAL_ident_type VAL 1 ID_IMSI "Paged by IMSI" VAL 4 ID_TMSI "Paged by TMSI" VAL 8 ID_PTMSI "Paged by PTMSI" VALTAB VAL_report_type VAL 0x0 REP_TYPE_1 "synchronize to the 6 strongest carriers and provide their BSICs" VAL 0x1 REP_TYPE_2 "synchronize to carriers in decreasing field strength until the BSICs for 6 carriers with allowed NCC are fully decoded" VAL 0x2 REP_TYPE_3 "no synchronization, no BSICs are provided" VAL 0x3 REP_TYPE_RES "reserved, ignore request for measurement data in this version" VALTAB VAL_xmeas_cause VAL 0 EXT_MEAS_OK "The results of the Extended Measurment procedure are valid." VAL 1 EXT_MEAS_RESET "GRR has stopped the Extended Measurement procedure" VAL 2 EXT_MEAS_LEAVE_IDLE "RR has entered a non-idle state and stopped the Extended Measurement procedure" VALTAB VAL_lac VAL DEF "lac" VAL 0xFFFE RRGRR_LA_INVALID "la invalid" VALTAB VAL_v_stop_ccch VAL 0 DONT_STOP_CCCH "Don't stop CCCH" VAL 1 STOP_CCCH "Stop CCCH" VAL 2 INVALID_MSG "The message was not assigned to MS" VAL 3 TASK_STOP_DUMMY_VALUE "Dummy value, only used for GRR internal purposes" VALTAB VAL_rxlev VAL 0x80 RRGRR_INVALID_RXLEV "receive signal strength level not present" VALTAB VAL_idx VAL 0xFF RRGRR_INVALID_IDX "index not present" VALTAB VAL_state VAL 0 TASK_STATE_PIM "Packet Idle Mode" VAL 1 TASK_STATE_PAM "Packet Access Mode" VAL 2 TASK_STATE_PTM "Packet Transfer Mode" VALTAB VAL_cell_bar_access_2 VAL 0 CBA_2_NORMAL "Status for cell reselection is set to normal" VAL 1 CBA_2_BARRED "Status for cell reselection is set to barred" VALTAB VAL_exc_acc VAL 0 EXC_ACC_NORMAL "Status for cell selection and reselection is set to normal" VAL 1 EXC_ACC_LIMITED "The MS is only allowed to camp on the cell for limited service" VALTAB VAL_same_ra_as_serving_cell VAL 0 DIFFERENT_RA_AS_SCELL "The cell is in a routing area different from the serving cell" VAL 1 SAME_RA_AS_SCELL "The cell is in the same routing area as the serving cell" VALTAB VAL_gprs_reselect_offset VAL 0 - 31 "Value range of parameter" VAL 0x10 GPRS_RESEL_OFF_DEFAULT "Default value (0 dB)" VAL 0xFF GPRS_RESEL_OFF_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_rxlev_access_min VAL 0 - 63 "Value range of parameter" VAL 0xFF GPRS_RXLEV_ACCESS_MIN_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_ms_txpwr_max_cch VAL 0 - 31 "Value range of parameter" VAL 0xFF GPRS_MS_TXPWR_MAX_CCH_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_temporary_offset VAL 0 - 7 "Value range of parameter" VAL 0xFF GPRS_TEMPORARY_OFFSET_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_gprs_penalty_time VAL 0 - 31 "Value range of parameter" VAL 0xFF GPRS_PENALTY_TIME_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_priority_class VAL 0 - 7 "Value range of parameter" VAL 0xFF GPRS_PRIORITY_CLASS_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_hcs_thr VAL 0 - 31 "Value range of parameter" VAL 0xFF GPRS_HCS_THR_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_si13_location VAL 0 SI13_LOC_BCCH_NORM "SYSTEM INFORMATION TYPE 13 message is sent on BCCH norm" VAL 1 SI13_LOC_BCCH_EXT "SYSTEM INFORMATION TYPE 13 message is sent on BCCH ext" VAL 0xFF SI13_LOC_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_pbcch_location VAL 0 - 3 "Value range of parameter" VAL 0xFF PBCCH_LOC_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_psi1_repeat_period VAL 0 - 15 "Value range of parameter" VAL 0xFF PSI1_RPT_PRD_INVALID "This value is used to indicate the absence of this parameter" VALTAB VAL_nc_mode VAL 0 NC2_NOT_USED "allow cell reselection" VAL 1 NC2_USED "inhibit cell reselection" VAL 2 NC_MODE_RESET "NC is reset to default" VALTAB VAL_meas_cause VAL 0x0 NC_STOP_MEAS " Stop the meas report" VAL 0x1 NC_START_MEAS "Start Averaging of measurements" VAL 0x2 NC_REPORT_MEAS "get the meas report from RR" VALTAB VAL_sync_type VAL 0 SYNC_INITIAL "Sync request for new carrier" VAL 1 SYNC_RECONFIRM "Reconfirm 10 sec Timer Expired" VALTAB VAL_rep_rate VAL 0x00 NORMAL_REP_RATE "Normal(SACCH)reporting rate" VAL 0x01 REDUCED_REP_RATE "Reduced reporting rate" VALTAB Val_inv_bsic VAL 0x00 INV_BSIC_REPORTING_DISABLED "Invalid BSIC reporting not enabled" VAL 0x01 INV_BSIC_REPORTING_ENABLED "Invalid BSIC reporting not enabled" VALTAB Val_scale_ord VAL 0x00 SCALE_0dB "Scaling by 0dB" VAL 0x01 SCALE_10dB "Scaling by 10dB" VAL 0x02 SCALE_AUTO "Automatic scaling" VALTAB Val_nco %REL99 AND TI_PS_FF_EMR% VAL 0 NCO_NC0 %REL99 AND TI_PS_FF_EMR% "Values Item" VAL 1 NCO_NC1 %REL99 AND TI_PS_FF_EMR% "Values Item" VAL 2 NCO_NC2 %REL99 AND TI_PS_FF_EMR% "Values Item" VAL 3 NCO_RESET %REL99 AND TI_PS_FF_EMR% "Values Item" VAL 4 NCO_EMPTY %REL99 AND TI_PS_FF_EMR% "Values Item" VAR cause "Cause" B VAL @p_rrgrr - VAL_cause@ VAR bcch_arfcn "Frequency of BCCH" S VAR bcch_bsic "BSIC of BCCH" B VAR ac_class "Access class for RACH" S VAR pwr_offset "Power offset" B VAR limited "Limited service" B VAR l_buf "length of content in bit" S VAR o_buf "offset of content in bit" S VAR buf "buffer content" B VAR si_to_read "SI to read" B VAL @p_rrgrr - VAL_si_to_read@ VAR si1_state "SI1 states" B VAL @p_rrgrr - VAL_si1_state@ VAR si3_state "SI3 states" B VAL @p_rrgrr - VAL_si3_state@ VAR si13_state "SI13 states" B VAL @p_rrgrr - VAL_si13_state@ VAR pg_type "The type of paging" B VAL @p_rrgrr - VAL_pg_type@ VAR rr_est "Allowance of RR establishment" B VAL @p_rrgrr - VAL_rr_est@ VAR v_non_gprs "Valid flag for non GPRS" B VAR att "Attach/detach allowed" B VAR v_T3212 "Valid flag for T3212" B VAR T3212 "T3212 value" B VAR neci "Half rate support" B VAR pwrc "Power control indicator" B VAR dtx "DTX indicator" B VAR radio_link_timeout "Supervisory timer for RR connection" B VAR bs_ag_blks_res "Number of blocks reserved for access grant" B VAR ccch_conf "Physical channel configuration for CCCH" B VAR max_retrans "Maximum number of retransmissions" B VAR tx_integer "Number of slots to spread transmission" B VAR ec "Emergency call allowed" B VAR ecsc %REL99% "Early Classmark sending flag in PSI2" B VAL @p_rrgrr - VAL_ecsc@ VAR v_ext_ie "Valid flag for extension bits IE" B VAR ext_len "Extension length" B VAR spare_bit "Spare bit (val(ext_len)+1)" B VAR ch_needed "Channel needed field" B VAR v_emlpp "Valid flag" B VAR emlpp "Value of emlpp_prio" B VAR susp_req "Send GPRS suspension request flag" B VAL @p_rrgrr - VAL_susp_req@ VAR req_data "" B VAR ia_index "indicates valid parts of the Imm Ass Ext msg" B VAR fn "Frame Number" L VAR wait_ind "wait indication (T3122)" B VAR r_bit "retry bit" B VAL @p_rrgrr - VAL_r_bit@ VAR old_ptmsi "Packet Temporary Mobile Subsciber Identity" L VAL @p_rrgrr - VAL_old_ptmsi@ VAR new_ptmsi "Packet Temporary Mobile Subsciber Identity" L VAL @p_rrgrr - VAL_old_ptmsi@ VAR mac_req "MAC mode request" B VAR cs_req "Channel Coding Schemme Request" B VAR tlli "temporary logical link identifier" L VAR mo_mt "MO/MT FALG" B VAR prio "Priority" B VAR rlc_mode_req "RLC Mode" B VAR llc_type "LLC Frame Type" B VAR req_bwd "Requested Bandwidth" S VAR rlc_octets "RLC Octet Count" S VAR c_value "C_Value" B VAR rxqual "Rx Quality" B VAR sign_var "Signal Variance" B VAR stop_cause "Stop cause" B VAL @p_rrgrr - VAL_stop_cause@ VAR arfcn "channel number" S VAL @p_rrgrr - VAL_arfcn@ VAR sb_flag "synchronisation burst flag" B VAL @p_rrgrr - VAL_sb_flag@ VAR bsic "base station identification code" B VAL @p_rrgrr - VAL_bsic@ VAR cr_type "Cell re-selection mode" B VAL @p_rrgrr - VAL_cr_type@ VAR sync_res "Indicates the result of synchronisation" B VAL @p_rrgrr - VAL_sync_res@ VAR cell_type "Ncell or Scell" B VAL @p_rrgrr - VAL_cell_type@ VAR v_cr_par "Valid Flag for GPRS Cell Selection Parameter" B VAR pag_mode "Paging Mode" B VAL @p_rrgrr - VAL_pag_mode@ VAR split_pg "Split paging cycle (the value, NOT the code)" S VAL @p_rrgrr - VAL_split_pg@ VAR rac "routing are code" B VAL @p_rrgrr - VAL_rac@ VAR is_pbcch_present "Indicates whether PBCCH is present or not" B VAR reconn_state "Indicates that the reconnection was successful or not" B VAL @p_rrgrr - VAL_reconn_state@ VAR reconn_cause "Cause for the reconnection, refer to causes sent with ASSIGNMENT FAILURE [3]" B VAL @p_rrgrr - VAL_reconn_cause@ VAR ident_type "Identity type" B VAL @p_rrgrr - VAL_ident_type@ VAR tmsi "temporary logical link identifier" L VAR report_type "Extended Measurement reporting type" B VAL @p_rrgrr - VAL_report_type@ VAR ncc_permitted "network colour code permission indicator" B VAR call_ref "Call reference ID" B VAR xmeas_cause "indicates the state of the extended measurement results" B VAL @p_rrgrr - VAL_xmeas_cause@ VAR lac "location area code" S VAL @p_rrgrr - VAL_lac@ VAR v_plmn "Valid Flag" B VAR mcc "Mobile Country Code" B VAR mnc "Mobile Network Code" B VAR v_stop_ccch "Indicates whether CCCH shall be stopped" B VAL @p_rrgrr - VAL_v_stop_ccch@ VAR cid "cell identification" S VAR rxlev "receive signal strength level" B VAL @p_rrgrr - VAL_rxlev@ VAR idx "index" B VAL @p_rrgrr - VAL_idx@ VAR state "Indicates to RR the state of GRR" B VAL @p_rrgrr - VAL_state@ VAR v_pim_pbcch "pim" B VAR v_pam_pbcch "pam" B VAR v_ptm_pbcch "ptm" B VAR bs_pa_mfrms "Paging Channel configuration" B VAR cell_bar_access_2 "CELL_BAR_ACCESS_2" B VAL @p_rrgrr - VAL_cell_bar_access_2@ VAR exc_acc "EXC_ACC" B VAL @p_rrgrr - VAL_exc_acc@ VAR same_ra_as_serving_cell "SAME_RA_AS_SERVING_CELL" B VAL @p_rrgrr - VAL_same_ra_as_serving_cell@ VAR gprs_reselect_offset "GPRS_RESELECT_OFFSET" B VAL @p_rrgrr - VAL_gprs_reselect_offset@ VAR gprs_rxlev_access_min "GPRS_RXLEV_ACCESS_MIN" B VAL @p_rrgrr - VAL_gprs_rxlev_access_min@ VAR gprs_ms_txpwr_max_cch "GPRS_MS_TXPWR_MAX_CCH" B VAL @p_rrgrr - VAL_gprs_ms_txpwr_max_cch@ VAR gprs_temporary_offset "GPRS_TEMPORARY_OFFSET" B VAL @p_rrgrr - VAL_gprs_temporary_offset@ VAR gprs_penalty_time "GPRS_PENALTY_TIME" B VAL @p_rrgrr - VAL_gprs_penalty_time@ VAR priority_class "PRIORITY_CLASS" B VAL @p_rrgrr - VAL_priority_class@ VAR hcs_thr "HCS_THR" B VAL @p_rrgrr - VAL_hcs_thr@ VAR si13_location "SI13 Location" B VAL @p_rrgrr - VAL_si13_location@ VAR pbcch_location "PBCCH_LOCATION" B VAL @p_rrgrr - VAL_pbcch_location@ VAR psi1_repeat_period "PSI1_REPEAT_PERIOD" B VAL @p_rrgrr - VAL_psi1_repeat_period@ VAR nc_mode "NC mode" B VAL @p_rrgrr - VAL_nc_mode@ VAR meas_cause "Basic Element" B VAL @p_rrgrr - VAL_meas_cause@ VAR sync_type "Sync Info indicating the Reconfirm Sync timer status" B VAL @p_rrgrr - VAL_sync_type@ VAR nco %REL99 AND TI_PS_FF_EMR% "Network control order, values same as enum T_NC_ORDER in grr.h" B VAL @p_rrgrr - Val_nco@ VAR is_valid %REL99 AND TI_PS_FF_EMR% "Indicates whether NC parameters following are valid" B VAR nc_non_drx %REL99 AND TI_PS_FF_EMR% "minimum time the mobile station shall stay in non-DRX mode after an NC-measurement report " B VAR nc_rep_per_i %REL99 AND TI_PS_FF_EMR% "Time period for cell reselection measurement reporting for packet idle mode (I) " B VAR nc_rep_per_t %REL99 AND TI_PS_FF_EMR% "Time period for cell reselection measurement reporting for packet transfer mode (T) " B VAR ba_ind %REL99 AND TI_PS_FF_EMR% "BA_IND used by RR for neighbor cell list" B VAR rtd %REL99 AND TI_PS_FF_RTD% "Real time difference value for all the neighbour cells" S COMP sdu "service data unit" { l_buf ; length of content in bit o_buf ; offset of content in bit buf [1] ; buffer content } COMP si_states "States of the SI" { si1_state ; State of SI1 si3_state ; State of SI3 si13_state ; State of SI13 } COMP non_gprs "Non-GPRS parameters" { v_non_gprs ; Valid flag for non GPRS att ; Attach/detach allowed v_T3212 ; Valid flag for T3212 T3212 ; T3212 value neci ; Half rate support pwrc ; Power control indicator dtx ; DTX indicator radio_link_timeout ; Supervisory timer for RR connection bs_ag_blks_res ; Number of blocks reserved for access grant ccch_conf ; Physical channel configuration for CCCH bs_pa_mfrms ; 51 MFs between paging max_retrans ; Maximum number of retransmissions tx_integer ; Number of slots to spread transmission ec ; Emergency call allowed gprs_ms_txpwr_max_cch ; GPRS_MS_TXPWR_MAX_CCH ecsc %REL99% ; Early Classmark sending flag in PSI2 } COMP ext_ie "Possible future extension" { ext_len ; Extension length spare_bit [8] ; Spare bit (val(ext_len)+1) } COMP emlpp_prio "eMLPP_PRIORITY" { v_emlpp ; Valid flag emlpp ; Value of emlpp_prio } COMP p_chan_req_des "Requested channel characteristics" { mo_mt ; MO/MT FALG prio ; Priority rlc_mode_req ; RLC Mode llc_type ; LLC Frame Type req_bwd ; Requested Bandwidth rlc_octets ; RLC Octet Count } COMP gprs_meas_results "GPRS Measurement Results" { c_value ; C_Value rxqual ; Rx Quality sign_var ; Signal Variance } COMP sync_result "Results of Synchronisation Attempts" { arfcn ; Channel Number sb_flag ; Error Cause bsic ; Base Station Identity Code } COMP rm_freq_list "frequencies to be removed" { arfcn ; Channel Number bsic ; BSIC } COMP meas_res "measurements ordered by the network" { arfcn ; ARFCN bsic ; BSIC rxlev ; RX Value } COMP arfcn_idx "Channel number and a associated index" { arfcn ; Radio Frequency Number idx ; Index to the ARFCN } COMP xmeas_res "results of the extended measurement" { arfcn_idx ; Radio Frequency Number and index rxlev ; field strength bsic ; Base Station Identification Code } COMP plmn "PLMN identification" { v_plmn ; Valid Flag mcc [SIZE_MCC] ; Mobile Country Code mnc [SIZE_MNC] ; Mobile Network Code } COMP rai "routing area identifier" { plmn ; PLMN lac ; Location Area Code rac ; Routing Area Code } UNION task "Task" { RR_TASK_1 v_stop_ccch ; Stop CCCH indicator LEAVE_PIM_PBCCH v_pim_pbcch ; Leave idle mode LEAVE_PAM_PBCCH v_pam_pbcch ; Leave access mode LEAVE_PTM_PBCCH v_ptm_pbcch ; Leave transfer mode } COMP rr_cell_env "current location of the mobile equipment" { plmn ; PLMN lac ; Location Area Code cid ; Cell Identification } COMP serving_cell_info "Cell information" { gprs_rxlev_access_min ; GPRS_RXLEV_ACCESS_MIN gprs_ms_txpwr_max_cch ; GPRS_MS_TXPWR_MAX_CCH bcch_arfcn ; Frequency of BCCH bcch_bsic ; BSIC of BCCH ac_class ; Access class for RACH pwr_offset ; Power offset rr_cell_env ; Cell Environment limited ; Limited service bs_pa_mfrms ; BS_PA_MFRMS arfcn [RRGRR_BA_LIST_SIZE] ; BA List ba_ind %REL99 AND TI_PS_FF_EMR% ; BA-IND of the BA(BCCH) } COMP nc_para_struct %REL99 AND TI_PS_FF_EMR% "Network control parameters" { nco %REL99 AND TI_PS_FF_EMR% ; Network control order is_valid %REL99 AND TI_PS_FF_EMR% ; Indicates whether following NC para are valid or not nc_non_drx %REL99 AND TI_PS_FF_EMR% ; NC-NON-DRX nc_rep_per_i %REL99 AND TI_PS_FF_EMR% ; NC Reporting period in PIM nc_rep_per_t %REL99 AND TI_PS_FF_EMR% ; Primitive structure element item } COMP cr_par "GPRS Cell Selection Parameter" { cell_bar_access_2 ; CELL_BAR_ACCESS_2 exc_acc ; EXC_ACC same_ra_as_serving_cell ; SAME_RA_AS_SERVING_CELL gprs_rxlev_access_min ; Primitive structure element item gprs_ms_txpwr_max_cch ; GPRS_RXLEV_ACCESS_MIN gprs_temporary_offset ; GPRS_MS_TXPWR_MAX_CCH gprs_penalty_time ; GPRS_PENALTY_TIME gprs_reselect_offset ; GPRS_RESELECT_OFFSET priority_class ; PRIORITY_CLASS hcs_thr ; HCS_THR si13_location ; SI13_LOCATION pbcch_location ; PBCCH_LOCATION psi1_repeat_period ; PSI1_REPEAT_PERIOD } COMP add_freq_list "BA list" { arfcn ; ARFCN bsic ; BSIC v_cr_par ; Valid Flag for GPRS Cell Selection Parameter cr_par ; GPRS Cell Selection Parameter } COMP ncell_sync_list %REL99 AND TI_PS_FF_RTD% "List of neighbourcell that needs to be synchronised." { arfcn ; Primitive structure element item < () rtd [0..MAX_NUM_OF_RTD_VALUES] > ; Primitive structure element item } ; RRGRR_GPRS_SI13_IND 0x6D00 ; RRGRR_PACKET_PAGING_IND 0x6D02 ; RRGRR_CHANNEL_REQ 0x2D00 ; RRGRR_IA_IND 0x6D03 ; RRGRR_IAEXT_IND 0x6D04 ; RRGRR_ASSIGNMENT_REJ_IND 0x6D05 ; RRGRR_DATA_IND 0x6D06 ; RRGRR_DATA_REQ 0x2D02 ; RRGRR_IA_DOWNLINK_IND 0x6D08 ; RRGRR_START_MON_CCCH_REQ 0x2D03 ; RRGRR_STOP_MON_CCCH_REQ 0x2D04 ; RRGRR_CR_REQ 0x2D05 ; RRGRR_START_MON_BCCH_REQ 0x2D06 ; RRGRR_RR_EST_REQ 0x2D07 ; RRGRR_RR_EST_RSP 0x2D08 ; RRGRR_RR_EST_IND 0x6D0D ; RRGRR_ACTIVATE_REQ 0x2D0A ; RRGRR_GPRS_DATA_REQ 0x2D0C ; RRGRR_SUSPEND_DCCH_REQ 0x2D0D ; RRGRR_SUSPEND_DCCH_CNF 0x6D10 ; RRGRR_RECONNECT_DCCH_REQ 0x2D0E ; RRGRR_RECONNECT_DCCH_CNF 0x6D11 ; RRGRR_RESUMED_TBF_REQ 0x2D01 ; RRGRR_RESUMED_TBF_CNF 0x6D07 ; RRGRR_STOP_DCCH_IND 0x6D12 ; RRGRR_CR_IND 0x6D13 ; RRGRR_NCELL_SYNC_REQ 0x2D0F ; RRGRR_NCELL_SYNC_IND 0x6D15 ; RRGRR_SYNC_REQ 0x2D10 ; RRGRR_SYNC_IND 0x6D16 ; RRGRR_UPDATE_BA_REQ 0x2D12 ; RRGRR_MEAS_REP_REQ 0x2D13 ; RRGRR_MEAS_REP_CNF 0x6D17 ; RRGRR_TBF_ESTABLISHED_REQ 0x2D14 ; RRGRR_CR_RSP 0x2D15 ; RRGRR_MS_ID_IND 0x6D19 ; RRGRR_EXT_MEAS_REQ 0x2D16 ; RRGRR_EXT_MEAS_CNF 0x6D0A ; RRGRR_EXT_MEAS_STOP_REQ 0x2D17 ; RRGRR_STOP_TASK_REQ 0x2D18 ; RRGRR_STOP_TASK_CNF 0x6D09 ; RRGRR_START_TASK_REQ 0x2D19 ; RRGRR_START_TASK_CNF 0x6D1A ; RRGRR_STANDBY_STATE_IND 0x2D1A ; RRGRR_READY_STATE_IND 0x2D1B ; RRGRR_CBCH_INFO_IND 0x2D1C ; RRGRR_SI2QUATER_IND 0x6D1B PRIM RRGRR_GPRS_SI13_IND 0x6D00 { cause ; Cause si_states ; State of SI serving_cell_info ; Cell information sdu ; Sdu to SI13 message } PRIM RRGRR_PACKET_PAGING_IND 0x6D02 { pg_type ; Paging type } PRIM RRGRR_CHANNEL_REQ 0x2D00 { req_data ; Channel Request Data } PRIM RRGRR_IA_IND 0x6D03 { fn ; Frame Number r_bit ; Retry Bit sdu ; Sdu to message } PRIM RRGRR_IAEXT_IND 0x6D04 { ia_index ; Index of IA fn ; Frame Number r_bit ; Retry Bit sdu ; Sdu to message } PRIM RRGRR_ASSIGNMENT_REJ_IND 0x6D05 { wait_ind ; wait indication r_bit ; Retry Bit } PRIM RRGRR_DATA_IND 0x6D06 { fn ; Frame Number sdu ; Sdu to message } PRIM RRGRR_DATA_REQ 0x2D02 { sdu ; Sdu to message } PRIM RRGRR_IA_DOWNLINK_IND 0x6D08 { fn ; Frame Number r_bit ; Retry Bit sdu ; Sdu to message } PRIM RRGRR_START_MON_CCCH_REQ 0x2D03 { pag_mode ; Paging Mode split_pg ; Split paging cycle } PRIM RRGRR_STOP_MON_CCCH_REQ 0x2D04 { is_pbcch_present ; PBCCH indicator } PRIM RRGRR_CR_REQ 0x2D05 { cr_type ; Cell re-selection mode arfcn ; channel number bsic ; bsic } PRIM RRGRR_START_MON_BCCH_REQ 0x2D06 { si_to_read ; SI to read } PRIM RRGRR_RR_EST_REQ 0x2D07 { non_gprs ; Non-GPRS parameters ch_needed ; Channel needed field ident_type ; Identity Type emlpp_prio ; eMLPP_PRIORITY susp_req ; GPRS Suspension request } PRIM RRGRR_RR_EST_RSP 0x2D08 { rr_est ; RR establishment allowence susp_req ; GPRS Suspension request } PRIM RRGRR_RR_EST_IND 0x6D0D { } PRIM RRGRR_ACTIVATE_REQ 0x2D0A { non_gprs ; Non-GPRS parameters susp_req ; GPRS Suspension request rac ; Routing area code } PRIM RRGRR_GPRS_DATA_REQ 0x2D0C { old_ptmsi ; Packet TMSI new_ptmsi ; Packet TMSI tlli ; TLLI p_chan_req_des ; Packet Channel Request Description gprs_meas_results ; GPRS Measurement Results mac_req ; MAC Mode Requested cs_req ; Channel Coding Scheme Requested rai ; Last valid routing area identifier } PRIM RRGRR_SUSPEND_DCCH_REQ 0x2D0D { } PRIM RRGRR_SUSPEND_DCCH_CNF 0x6D10 { } PRIM RRGRR_RECONNECT_DCCH_REQ 0x2D0E { reconn_cause ; why can't the procedure continue; ref to ASSIGNMENT FAILURE message } PRIM RRGRR_RECONNECT_DCCH_CNF 0x6D11 { reconn_state ; result of the reconnection procedure; may indicate Lower Layer Failure } PRIM RRGRR_RESUMED_TBF_REQ 0x2D01 { } PRIM RRGRR_RESUMED_TBF_CNF 0x6D07 { } PRIM RRGRR_STOP_DCCH_IND 0x6D12 { stop_cause ; Stop Cause } PRIM RRGRR_CR_IND 0x6D13 { cr_type ; Cell re-selection mode } PRIM RRGRR_NCELL_SYNC_REQ 0x2D0F { arfcn [RRGRR_MAX_ARFCN_NCELL_SYNC_REQ] %!TI_PS_FF_RTD% ; List of Channel Numbers sync_type ; Primitive Item ncell_sync_list [RRGRR_MAX_ARFCN_NCELL_SYNC_REQ] %REL99 AND TI_PS_FF_RTD% ; List of neighbourcell that needs to be synchronised. } PRIM RRGRR_NCELL_SYNC_IND 0x6D15 { sync_result [RRGRR_MAX_RSLT_NCELL_SYNC_IND] ; Results of Neighbour Cell Synchronisation } PRIM RRGRR_SYNC_REQ 0x2D10 { arfcn ; Frequency bsic ; Bsic } PRIM RRGRR_SYNC_IND 0x6D16 { sync_res ; Synchronisation Result } PRIM RRGRR_UPDATE_BA_REQ 0x2D12 { cell_type ; cell type nc_mode ; NC mode add_freq_list [RRGRR_BA_LIST_SIZE] ; ba list added rm_freq_list [RRGRR_BA_LIST_SIZE] ; ba list removed } PRIM RRGRR_MEAS_REP_REQ 0x2D13 { meas_cause ; measurement repot } PRIM RRGRR_MEAS_REP_CNF 0x6D17 { meas_res [RRGRR_MEAS_REP_LIST_SIZE] ; meas report } PRIM RRGRR_TBF_ESTABLISHED_REQ 0x2D14 { } PRIM RRGRR_CR_RSP 0x2D15 { } PRIM RRGRR_MS_ID_IND 0x6D19 { tmsi ; T M S I } PRIM RRGRR_EXT_MEAS_REQ 0x2D16 { arfcn_idx [1..RRGRR_MAX_ARFCN_EXT_MEAS] ; Frequency Channel Numbers call_ref ; Call reference ID report_type ; Reporting type ncc_permitted ; Permitted cells indication } PRIM RRGRR_EXT_MEAS_CNF 0x6D0A { xmeas_res [0..RRGRR_MAX_ARFCN_EXT_MEAS] ; Frequency Channel Numbers; array length = 0 if procedure was stopped call_ref ; Call reference ID xmeas_cause ; Result state } PRIM RRGRR_EXT_MEAS_STOP_REQ 0x2D17 { } PRIM RRGRR_STOP_TASK_REQ 0x2D18 { task ; Task } PRIM RRGRR_STOP_TASK_CNF 0x6D09 { } PRIM RRGRR_START_TASK_REQ 0x2D19 { state ; State } PRIM RRGRR_START_TASK_CNF 0x6D1A { } PRIM RRGRR_STANDBY_STATE_IND 0x2D1A { } PRIM RRGRR_READY_STATE_IND 0x2D1B { } PRIM RRGRR_CBCH_INFO_IND 0x2D1C %REL99% { EXTERN @p_mph - cbch@ cbch ; cell broadcast channel information. } PRIM RRGRR_SI2QUATER_IND 0x6D1B %REL99 AND TI_PS_FF_EMR% { EXTERN @p_mph - rep_type@ rep_type %REL99 AND TI_PS_FF_EMR% ; Primitive Item EXTERN @p_mph - enh_para_struct@ enh_para_struct %REL99 AND TI_PS_FF_EMR% ; Primitive Item nc_para_struct %REL99 AND TI_PS_FF_EMR% ; Primitive Item }