view cdg-hybrid/cdginc/p_8010_134_mmpm_sap.val @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 35f7a1dc9f7d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_8010_134_mmpm_sap.val                                        |
| SOURCE  : "sap\8010_134_mmpm_sap.pdf"                                    |
| LastModified : "2003-07-29"                                              |
| IdAndVersion : "8010.134.02.007"                                         |
| SrcFileTime  : "Thu Nov 29 09:27:04 2007"                                |
| Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : MMPM
 * COMPATIBILITY_DEFINES  : NO
 * ALWAYS_ENUM_IN_VAL_FILE: YES
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_8010_134_MMPM_SAP_VAL
#define P_8010_134_MMPM_SAP_VAL


#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL

#define CDG_ENTER__FILENAME _P_8010_134_MMPM_SAP_VAL
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__LAST_MODIFIED _2003_07_29
#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__ID_AND_VERSION _8010_134_02_007

#define CDG_ENTER__P_8010_134_MMPM_SAP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_27_04_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_8010_134_MMPM_SAP_VAL

#undef CDG_ENTER__FILENAME

#include "p_8010_137_nas_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_152_ps_include.val"   /* Access values independent from the corresponding h-file. */

#include "p_8010_153_cause_include.val"   /* Access values independent from the corresponding h-file. */


/*
 * Enum to value table VAL_establish_cause
 * CCDGEN:WriteEnum_Count==26
 */
#ifndef __T_MMPM_VAL_establish_cause__
#define __T_MMPM_VAL_establish_cause__
typedef enum
{
  MMPM_CAUSE_ESTABL_ORIG_CONVERSATIONAL = 0x1,    /* Originating conversational call */
  MMPM_CAUSE_ESTABL_ORIG_STREAMING = 0x2,         /* Originating streaming call     */
  MMPM_CAUSE_ESTABL_ORIG_INTERACTIVE = 0x3,       /* Originating interactive call   */
  MMPM_CAUSE_ESTABL_ORIG_BACKGROUND = 0x4,        /* Originating background call    */
  MMPM_CAUSE_ESTABL_ORIG_HIGH_PRIO_SIGNALLING = 0x5, /* Originating high priority signalling */
  MMPM_CAUSE_ESTABL_ORIG_LOW_PRIO_SIGNALLING = 0x6 /* Originating low priority signalling */
}T_MMPM_VAL_establish_cause;
#endif

/*
 * Enum to value table VAL_reg_state
 * CCDGEN:WriteEnum_Count==27
 */
#ifndef __T_MMPM_VAL_reg_state__
#define __T_MMPM_VAL_reg_state__
typedef enum
{
  MMPM_RS_DEREGISTERED           = 0x0,           /* GMM context for SMS is removed */
  MMPM_RS_REGISTERED             = 0x1            /* GMM context for SMS is built   */
}T_MMPM_VAL_reg_state;
#endif

/*
 * user defined constants
 */
#define MMPM_MAX_N_PDU_NUMBER_LIST     (0x10)     

#include "CDG_LEAVE.h"


#endif