view helpers/srec4ram.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 1fb47f5b597a
children
line wrap: on
line source

/*
 * This ad hoc utility is used as part of building RAM-loadable
 * firmware images for targets with large RAM.  It reads the ramimage.m0
 * S-record file produced by TI's hex470 post-linker and re-emits it
 * in another SREC form that is suitable for feeding to fc-xram.
 */

#include <sys/types.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>

char *infname;
FILE *inf, *outf;
char srecbuf[80];
u_char srecbin[40], srecout[40];
int lineno;

decode_hex_byte(s)
	char *s;
{
	register int u, l;

	if (!isxdigit(s[0]) || !isxdigit(s[1]))
		return(-1);
	if (isdigit(s[0]))
		u = s[0] - '0';
	else if (isupper(s[0]))
		u = s[0] - 'A' + 10;
	else
		u = s[0] - 'a' + 10;
	if (isdigit(s[1]))
		l = s[1] - '0';
	else if (isupper(s[1]))
		l = s[1] - 'A' + 10;
	else
		l = s[1] - 'a' + 10;
	return((u << 4) | l);
}

srec2bin()
{
	register int i, l, b;

	l = decode_hex_byte(srecbuf + 2);
	if (l < 1) {
		fprintf(stderr, "%s line %d: S-record length octet is bad\n",
			infname, lineno);
		exit(1);
	}
	srecbin[0] = l;
	if (l > 35) {
		fprintf(stderr,
			"%s line %d: S-record is longer than expected\n",
			infname, lineno);
		exit(1);
	}
	for (i = 1; i <= l; i++) {
		b = decode_hex_byte(srecbuf + i*2 + 2);
		if (b < 0) {
			fprintf(stderr, "%s line %d: hex decode error\n",
				infname, lineno);
			exit(1);
		}
		srecbin[i] = b;
	}
	return(0);
}

srec_cksum()
{
	u_char accum;
	register int i, len;

	len = srecbin[0] + 1;
	accum = 0;
	for (i = 0; i < len; i++)
		accum += srecbin[i];
	if (accum != 0xFF) {
		fprintf(stderr, "%s line %d: bad checksum\n", infname, lineno);
		exit(1);
	}
	return(0);
}

emit_output_srec(type, buf)
	u_char *buf;
{
	int i;
	u_char accum = 0;

	putc('S', outf);
	putc(type, outf);
	for (i = 0; i < buf[0]; i++) {
		fprintf(outf, "%02X", buf[i]);
		accum += buf[i];
	}
	fprintf(outf, "%02X\n", ~accum & 0xFF);
	return 0;
}

transform_s3()
{
	int datalen;
	u_char *sp, *dp;
	int i;

	if (srecbin[0] < 6) {
		fprintf(stderr,
			"%s line %d: S3 record is too short\n",
			infname, lineno);
		exit(1);
	}
	datalen = srecbin[0] - 5;
	if (datalen & 1) {
		fprintf(stderr, "%s line %d: odd data length\n",
			infname, lineno);
		exit(1);
	}
	sp = srecbin;
	dp = srecout;
	for (i = 0; i < 5; i++)
		*dp++ = *sp++;
	for (i = 0; i < datalen; i += 2) {
		dp[0] = sp[1];
		dp[1] = sp[0];
		sp += 2;
		dp += 2;
	}
	return 0;
}

generate_vectors_record()
{
	u_char *dp;
	u_long addr;
	int i;

	srecout[0] = 28 + 5;
	srecout[1] = 0x00;
	srecout[2] = 0x80;
	srecout[3] = 0x00;
	srecout[4] = 0x00;
	dp = srecout + 5;
	for (i = 0; i < 7; i++) {
		addr = 0x01004000 + i * 4;
		*dp++ = addr;
		*dp++ = addr >> 8;
		*dp++ = addr >> 16;
		*dp++ = addr >> 24;
	}
	emit_output_srec('3', srecout);
	return 0;
}

generate_jump_record()
{
	srecout[0] = 5;
	srecout[1] = 0x01;
	srecout[2] = 0x00;
	srecout[3] = 0x40;
	srecout[4] = 0x58;
	emit_output_srec('7', srecout);
	return 0;
}

main(argc, argv)
	char **argv;
{
	if (argc < 2 || argc > 3) {
		fprintf(stderr, "usage: %s input.m0 [output.srec]\n", argv[0]);
		exit(1);
	}
	infname = argv[1];
	inf = fopen(infname, "r");
	if (!inf) {
		perror(infname);
		exit(1);
	}
	if (argc > 2) {
		outf = fopen(argv[2], "w");
		if (!outf) {
			perror(argv[2]);
			exit(1);
		}
	} else
		outf = stdout;
	for (lineno = 1; ; lineno++) {
		if (!fgets(srecbuf, sizeof srecbuf, inf)) {
			fprintf(stderr, "%s: premature EOF\n", infname);
			exit(1);
		}
		if (srecbuf[0] != 'S') {
			fprintf(stderr, "%s line %d: not an S-record\n",
				infname, lineno);
			exit(1);
		}
		srec2bin();
		srec_cksum();
		switch (srecbuf[1]) {
		case '0':
			emit_output_srec('0', srecbin);
			continue;
		case '3':
			transform_s3();
			emit_output_srec('3', srecout);
			continue;
		case '7':
			break;
		default:
			fprintf(stderr, "%s line %d: unexpected S%c record\n",
				infname, lineno, srecbuf[1]);
			exit(1);
		}
		break;
	}
	generate_vectors_record();
	generate_jump_record();
	exit(0);
}