view src/cs/layer1/gtt_include/l1gtt_defty.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1GTT_DEFTY.H
 *
 *        Filename l1gtt_defty.h
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#ifndef _L1GTT_DEFTY_H_
#define _L1GTT_DEFTY_H_

#if (L1_GTT == 1)

  // GTT L1A/L1S COM structure
  //---------------------------

  typedef struct
  {
    BOOL  start;
    BOOL  stop;
  }
  T_GTT_COMMAND;

  typedef struct
  {
    UWORD8  scen_enable;
    UWORD16 rate;
  }
  T_GTT_TEST;

  typedef struct
  {
    T_GTT_TEST    test;
    T_GTT_COMMAND command;
  }
  T_GTT_TASK;

  // FIFO structure
  //----------------

    #if (CODE_VERSION == SIMULATION)

      // DSP address do not exist --> 32-bit addresses
      typedef struct
      {
        API *ptr_read;         //API pointer to current data to read
        API *ptr_write;        //API pointer to free area to write to
        API *buffer_start;     //pointer to start
        UWORD16 buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #else

      typedef struct
      {
        API ptr_read;         //API pointer to current data to read
        API ptr_write;        //API pointer to free area to write to
        API buffer_start;     //pointer to start
        API buffer_length;    //length of buffer
      }
      T_TTY_FIFO_struct;

    #endif

  // GTT test data
  //--------------

  typedef struct
  {
    UWORD16 scen_index;
    UWORD16 scen_length;
    char   *scen_ptr;
    UWORD8  chars_to_push;
    UWORD16 frame_count;
  }
  T_GTT_TEST_L1S;

#endif 


#endif //_L1GTT_DEFTY_H_