FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/include/l1_macro.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1_MACRO.H * * Filename l1_macro.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #include "l1_confg.h" #if(L1_DYN_DSP_DWNLD == 1) #include "l1_dyn_dwl_const.h" #endif #if (TRACE_TYPE==5) && NUCLEUS_TRACE //WARNING : this type of trace takes a lot of space in data RAM (~16kB) // switch for Nucleus debugging messages. #define NU_ALLOC_ERR 0 #define NU_DEALLOC_ERR 1 #define NU_RCVE_QUEUE_ERR 2 #define NU_SEND_QUEUE_ERR 3 #define NU_OBTA_SEMA_ERR 4 #define NU_RLSE_SEMA_ERR 5 // Nucleus debug function. #define DEBUGMSG(status,type) \ if(status) switch(type) \ { \ case NU_ALLOC_ERR: \ printf("NU mem. allocation error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ \ case NU_DEALLOC_ERR: \ printf("NU mem. deallocation error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ \ case NU_RCVE_QUEUE_ERR: \ printf("NU rcve queue error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ \ case NU_SEND_QUEUE_ERR: \ printf("NU send queue error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ \ case NU_OBTA_SEMA_ERR: \ printf("NU obtain semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ \ case NU_RLSE_SEMA_ERR: \ printf("NU release semaph. error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ \ default: \ printf("Unknown error %d file %s line %d\n", status,__FILE__,__LINE__); \ exit(0); \ break; \ } #else #define DEBUGMSG(status,type) #endif /************************************************************/ /* Macros for FAST INTEGER MODULO implementation. */ /************************************************************/ #define IncMod(operand, increment, modulo) \ if( (operand += increment) >= modulo ) operand -= modulo // Define MACRO for selecting the min. time to next task. #define Select_min_time(Task_Time, Min_Time) \ if(Task_Time < Min_Time) Min_Time = Task_Time; /************************************************************/ /* Macros for MCU/DSP API address conversion . */ /************************************************************/ #if(L1_DYN_DSP_DWNLD == 1) #define API_address_dsp2mcu(dsp_address) \ (MCU_API_BASE_ADDRESS + ((API)((dsp_address) - DSP_API_BASE_ADDRESS) * 2)) #define API_address_mcu2dsp(mcu_address) \ (DSP_API_BASE_ADDRESS + ((UWORD32)((mcu_address) - MCU_API_BASE_ADDRESS) / 2)) #endif