FreeCalypso > hg > fc-tourmaline

view src/cs/layer1/include/l1_rtt_macro.h @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software 
 * L1_RTT_MACRO.H
 *
 *        Filename %M%
 *  Copyright 2003 (C) Texas Instruments  
 *
 ************* Revision Controle System Header *************/

#if (defined RVM_RTT_SWE || (OP_L1_STANDALONE == 1))

#include "rvt_gen.h"
#include "rtt_gen.h"

extern T_TRACE_INFO_STRUCT trace_info;
                                                                    
/***********************************************************************************************************/
/* Macro for cell enabling checking                                                                        */
/***********************************************************************************************************/

#define SELECTED_BITMAP(enable_bit) \
  enable_bit < 32  ? (0x0001 << (enable_bit -   0)) & trace_info.current_config->rttl1_cell_enable[0] : \
  enable_bit < 64  ? (0x0001 << (enable_bit -  32)) & trace_info.current_config->rttl1_cell_enable[1] : \
  enable_bit < 96  ? (0x0001 << (enable_bit -  64)) & trace_info.current_config->rttl1_cell_enable[2] : \
  enable_bit < 128 ? (0x0001 << (enable_bit -  96)) & trace_info.current_config->rttl1_cell_enable[3] : \
  enable_bit < 160 ? (0x0001 << (enable_bit - 128)) & trace_info.current_config->rttl1_cell_enable[4] : \
  enable_bit < 192 ? (0x0001 << (enable_bit - 160)) & trace_info.current_config->rttl1_cell_enable[5] : \
  enable_bit < 224 ? (0x0001 << (enable_bit - 192)) & trace_info.current_config->rttl1_cell_enable[6] : \
                     (0x0001 << (enable_bit - 224)) & trace_info.current_config->rttl1_cell_enable[7]

/***********************************************************************************************************/
/* Macros for buffer filling                                                                               */
/***********************************************************************************************************/

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: FN
                                     
#define RTTL1_FILL_FN(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FN)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FN))) != NULL) \
      { \
        ((T_RTTL1_FN *)ptr)->fn          = param1; \
        ((T_RTTL1_FN *)ptr)->cell_id     = RTTL1_ENABLE_FN; \
      } \
  }

//-----------------------------------------------------------------------------------------------------------
// L1 RTT cell filling: Downlink burst
                                     
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_BURST))                                                                  \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_BURST))) != NULL) \
      { \
        ((T_RTTL1_DL_BURST *)ptr)->angle       = param1; \
        ((T_RTTL1_DL_BURST *)ptr)->snr         = param2; \
        ((T_RTTL1_DL_BURST *)ptr)->afc         = param3; \
        ((T_RTTL1_DL_BURST *)ptr)->task        = param4; \
        ((T_RTTL1_DL_BURST *)ptr)->pm          = param5; \
        ((T_RTTL1_DL_BURST *)ptr)->toa         = param6; \
        ((T_RTTL1_DL_BURST *)ptr)->input_level = param7; \
        ((T_RTTL1_DL_BURST *)ptr)->cell_id     = RTTL1_ENABLE_DL_BURST; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Normal Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_NB(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_NB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_NB))) != NULL) \
      { \
        ((T_RTTL1_UL_NB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_NB *)ptr)->ta      = param2; \
        ((T_RTTL1_UL_NB *)ptr)->txpwr   = param3; \
        ((T_RTTL1_UL_NB *)ptr)->cell_id = RTTL1_ENABLE_UL_NB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink Access Burst                                                                   
                                                                                                              
#define RTTL1_FILL_UL_AB(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_AB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_AB))) != NULL) \
      { \
        ((T_RTTL1_UL_AB *)ptr)->task    = param1; \
        ((T_RTTL1_UL_AB *)ptr)->txpwr   = param2; \
        ((T_RTTL1_UL_AB *)ptr)->cell_id = RTTL1_ENABLE_UL_AB; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_FULL_LIST_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_FULL_LIST_MEAS))) != NULL) \
      {                                                                                                       \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_FULL_LIST_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_FULL_LIST_MEAS; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Full list measurement                                                                           
                                                                                                              
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MON_MEAS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MON_MEAS))) != NULL) \
      { \
        ((T_RTTL1_MON_MEAS *)ptr)->pm          = param1; \
        ((T_RTTL1_MON_MEAS *)ptr)->input_level = param2; \
        ((T_RTTL1_MON_MEAS *)ptr)->task        = param3; \
        ((T_RTTL1_MON_MEAS *)ptr)->radio_freq  = param4; \
        ((T_RTTL1_MON_MEAS *)ptr)->cell_id     = RTTL1_ENABLE_MON_MEAS; \
      } \
  }                                                                                                           

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink DCCH block                                                                   
                                                                                                              
#define RTTL1_FILL_DL_DCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_DCCH *)ptr)->valid_flag    = param1; \
        ((T_RTTL1_DL_DCCH *)ptr)->physical_info = param2; \
        ((T_RTTL1_DL_DCCH *)ptr)->cell_id       = RTTL1_ENABLE_DL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PTCCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PTCCH(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PTCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PTCCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PTCCH *)ptr)->crc        = param1; \
        ((T_RTTL1_DL_PTCCH *)ptr)->ordered_ta = param2; \
        ((T_RTTL1_DL_PTCCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PTCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink DCCH block                                                                     
                                                                                                              
#define RTTL1_FILL_UL_DCCH \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_DCCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_DCCH))) != NULL) \
      { \
        ((T_RTTL1_UL_DCCH *)ptr)->cell_id = RTTL1_ENABLE_UL_DCCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink SACCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_SACCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_SACCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_SACCH))) != NULL) \
      { \
        ((T_RTTL1_UL_SACCH *)ptr)->data_present   = param1; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_ta    = param2; \
        ((T_RTTL1_UL_SACCH *)ptr)->reported_txpwr = param3; \
        ((T_RTTL1_UL_SACCH *)ptr)->cell_id        = RTTL1_ENABLE_UL_SACCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Downlink PDTCH block                                                                  
                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_DL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_DL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_DL_PDTCH *)ptr)->mac_header = param1; \
        ((T_RTTL1_DL_PDTCH *)ptr)->tfi_result = param2; \
        ((T_RTTL1_DL_PDTCH *)ptr)->crc        = param3; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cs_type    = param4; \
        ((T_RTTL1_DL_PDTCH *)ptr)->timeslot   = param5; \
        ((T_RTTL1_DL_PDTCH *)ptr)->cell_id    = RTTL1_ENABLE_DL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: Uplink PDTCH block                                                                    
                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_UL_PDTCH)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_UL_PDTCH))) != NULL) \
      { \
        ((T_RTTL1_UL_PDTCH *)ptr)->cs_type      = param1; \
        ((T_RTTL1_UL_PDTCH *)ptr)->data_allowed = param2; \
        ((T_RTTL1_UL_PDTCH *)ptr)->timeslot     = param3; \
        ((T_RTTL1_UL_PDTCH *)ptr)->cell_id      = RTTL1_ENABLE_UL_PDTCH; \
      } \
  }                                                                                                           
                                                                                                              
//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MAC-S error                                                                           
                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MACS_STATUS)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MACS_STATUS))) != NULL) \
      { \
        ((T_RTTL1_MACS_STATUS *)ptr)->status   = param1; \
        ((T_RTTL1_MACS_STATUS *)ptr)->timeslot = param2; \
        ((T_RTTL1_MACS_STATUS *)ptr)->cell_id  = RTTL1_ENABLE_MACS_STATUS; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: L1S task enable                                                                       
                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_L1S_TASK_ENABLE)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_L1S_TASK_ENABLE))) != NULL) \
      { \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap1  = param1; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->bitmap2  = param2; \
        ((T_RTTL1_L1S_TASK_ENABLE *)ptr)->cell_id  = RTTL1_ENABLE_L1S_TASK_ENABLE; \
      } \
  }

//----------------------------------------------------------------------------------------------------------- 
// L1 RTT cell filling: MFTAB trace                                                                       
                                                                                                              
#define RTTL1_FILL_MFTAB(param1) \
  if(SELECTED_BITMAP(RTTL1_ENABLE_MFTAB)) \
  { \
      T_RTT_PTR  ptr; \
\
      if ((ptr = trace_info.l1s_rtt_func.rtt_get_fill_ptr(trace_info.l1s_trace_user_id, sizeof(T_RTTL1_MFTAB))) != NULL) \
      { \
        ((T_RTTL1_MFTAB *)ptr)->func     = param1; \
        ((T_RTTL1_MFTAB *)ptr)->cell_id  = RTTL1_ENABLE_MFTAB; \
      } \
  }

/***********************************************************************************************************/ 
/* Macro for events                                                                                        */ 
/***********************************************************************************************************/
                                                                                                              
#define RTTL1_EVENT(id,size) \
  if (trace_info.current_config->rttl1_event_enable & (0x1 << id)) \
    trace_info.l1s_rtt_func.rtt_dump_buffer(trace_info.l1s_trace_user_id, size);
#else // RVM_RTT_SWE || OP_L1_STANDALONE

// No RTT: all macros are empty
#define SELECTED_BITMAP(enable_bit) (0)                                   
#define RTTL1_FILL_FN(param1)                                      
#define RTTL1_FILL_DL_BURST(param1,param2,param3,param4,param5,param6,param7)                                                                                                               
#define RTTL1_FILL_UL_NB(param1, param2, param3)                                                                                                               
#define RTTL1_FILL_UL_AB(param1, param2)                                                                                                               
#define RTTL1_FILL_FULL_LIST_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_MON_MEAS(param1, param2, param3, param4)                                                                                                               
#define RTTL1_FILL_DL_DCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_DL_PTCCH(param1, param2)                                                                                                               
#define RTTL1_FILL_UL_DCCH                                                                                                               
#define RTTL1_FILL_UL_SACCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_DL_PDTCH(param1, param2, param3, param4, param5)                                                                                                              
#define RTTL1_FILL_UL_PDTCH(param1, param2, param3)                                                                                                              
#define RTTL1_FILL_MACS_STATUS(param1, param2)                                                                                                              
#define RTTL1_FILL_L1S_TASK_ENABLE(param1, param2)                                                                                                              
#define RTTL1_FILL_MFTAB(param1)
#define RTTL1_EVENT(id,size)

#endif // RVM_RTT_SWE || OP_L1_STANDALONE