FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/p_cfile/l1p_afun.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_AFUN.C * * Filename l1p_afun.c * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define L1P_AFUN_C #include "l1_macro.h" #include "l1_confg.h" #if L1_GPRS #if (CODE_VERSION == SIMULATION) #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #include "l1_defty.h" #include "cust_os.h" #include "l1_varex.h" #include "l1p_cons.h" #include "l1p_msgt.h" #include "l1p_deft.h" #include "l1p_vare.h" #include "l1_msgty.h" #include "l1_proto.h" #else #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #include "l1_defty.h" #include "cust_os.h" #include "l1_varex.h" #include "l1p_cons.h" #include "l1p_msgt.h" #include "l1p_deft.h" #include "l1p_vare.h" #include "l1_msgty.h" #include "l1_proto.h" #endif // Internal prototypes T_TRANSFER_SET *l1pa_get_free_transfer_set (UWORD8 new_tbf); int l1pa_sort (const void *a, const void *b); void l1pa_reset_cr_freq_list (); T_CRES_LIST_PARAM *l1pa_get_free_cres_list_set(); void l1pa_send_int_meas_report (UWORD32 SignalCode, T_L1P_ITMEAS_IND *last_l1s_msg, T_L1A_INT_MEAS_PARAM *first_meas_ptr); void l1pa_send_confirmation (UWORD32 SignalCode, UWORD8 id); /*-------------------------------------------------------*/ /* l1pa_get_free_transfer_set() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* */ /* Modified parameters from globals: */ /* --------------------------------- */ /* */ /*-------------------------------------------------------*/ T_TRANSFER_SET *l1pa_get_free_transfer_set(UWORD8 new_tbf) { T_TRANSFER_SET *transfer_set; #define clear_and_new(i, tbf) \ switch(tbf) \ { \ case UL_TBF: \ l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = DL_TBF; \ break; \ \ case DL_TBF: \ l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = UL_TBF; \ break; \ } // If new_tbf is to replace an existing one, we must return // the considered free set. if(new_tbf == BOTH_TBF) { if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == NO_TBF) transfer_set = l1pa_l1ps_com.transfer.fset[1]; else transfer_set = l1pa_l1ps_com.transfer.fset[0]; } else if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == new_tbf) transfer_set = l1pa_l1ps_com.transfer.fset[0]; else if(l1pa_l1ps_com.transfer.fset[1]->allocated_tbf == new_tbf) transfer_set = l1pa_l1ps_com.transfer.fset[1]; else if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == BOTH_TBF) { clear_and_new(0, new_tbf); transfer_set = l1pa_l1ps_com.transfer.fset[1]; } else if(l1pa_l1ps_com.transfer.fset[1]->allocated_tbf == BOTH_TBF) { clear_and_new(1, new_tbf); transfer_set = l1pa_l1ps_com.transfer.fset[0]; } else if(l1pa_l1ps_com.transfer.fset[0]->allocated_tbf == NO_TBF) transfer_set = l1pa_l1ps_com.transfer.fset[0]; else transfer_set = l1pa_l1ps_com.transfer.fset[1]; transfer_set->SignalCode = NULL; transfer_set->dl_tbf_synchro_timeslot = 0; transfer_set->ul_tbf_synchro_timeslot = 0; transfer_set->transfer_synchro_timeslot = 0; // No init of "allocated_tbf" transfer_set->assignment_command = NO_TBF; transfer_set->multislot_class = 0; transfer_set->packet_ta.ta = 255; // Not present transfer_set->packet_ta.ta_index = 255; // Not present transfer_set->packet_ta.ta_tn = 255; // Not present transfer_set->tsc = 0; transfer_set->freq_param.chan_sel.h = 0; transfer_set->freq_param.chan_sel.rf_channel.single_rf.radio_freq = 0; transfer_set->freq_param.chan_sel.rf_channel.hopping_rf.maio = 0; transfer_set->freq_param.chan_sel.rf_channel.hopping_rf.hsn = 0; transfer_set->freq_param.freq_list.rf_chan_cnt = 0; transfer_set->tbf_sti.present = FALSE; transfer_set->dl_pwr_ctl.p0 = 255; transfer_set->dl_pwr_ctl.bts_pwr_ctl_mode = 0; transfer_set->dl_pwr_ctl.pr_mode = 0; transfer_set->ts_override = 0; transfer_set->pc_meas_chan = 0; // No init of "ul_tbf_alloc" and "ul_tbf_alloc", mac_mode is enought return(transfer_set); } /*-------------------------------------------------------*/ /* l1pa_sort() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* */ /* Modified parameters from globals: */ /* --------------------------------- */ /* */ /*-------------------------------------------------------*/ int l1pa_sort(const void *a, const void *b) { UWORD8 entry1, entry2; entry1 = *((UWORD8*) a); entry2 = *((UWORD8*) b); if (entry1 < entry2 ) return(-1); else if (entry1 == entry2) return(0); else return(1); } /*-------------------------------------------------------*/ /* l1pa_reset_cr_freq_list() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function resets parameters used in Frequency */ /* list task */ /* */ /*-------------------------------------------------------*/ void l1pa_reset_cr_freq_list() { UWORD8 i; for(i=0; i<NB_MEAS_MAX_GPRS; i++) { l1pa_l1ps_com.cr_freq_list.used_il_lna [i].il = l1_config.params.il_min; // IL used in CTRL phase for AGC setting. l1pa_l1ps_com.cr_freq_list.used_il_lna_d [i].il = l1_config.params.il_min; // ... 1 frame delay. l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i].il = l1_config.params.il_min; // ... 2 frames delay, used in READ phase. l1pa_l1ps_com.cr_freq_list.used_il_lna [i].lna = FALSE; // LNA used in CTRL phase for AGC setting. l1pa_l1ps_com.cr_freq_list.used_il_lna_d [i].lna = FALSE; // ... 1 frame delay. l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i].lna = FALSE; // ... 2 frames delay, used in READ phase. } // Initialize next power measurement control. l1pa_l1ps_com.cr_freq_list.next_to_ctrl = 0; // Initialize next power measurement result. l1pa_l1ps_com.cr_freq_list.next_to_read = 0; // Reset PPCH burst ctrl indication l1pa_l1ps_com.cr_freq_list.pnp_ctrl = 0; } /*-------------------------------------------------------*/ /* l1pa_get_free_cres_list_set() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ T_CRES_LIST_PARAM *l1pa_get_free_cres_list_set() { T_CRES_LIST_PARAM *flist; // Get free set pointer. if(l1pa_l1ps_com.cres_freq_list.alist == &(l1pa_l1ps_com.cres_freq_list.list[0])) flist = &(l1pa_l1ps_com.cres_freq_list.list[1]); else flist = &(l1pa_l1ps_com.cres_freq_list.list[0]); // Clear free set. flist->nb_carrier = 0; flist->list_id = 0; // Reset fifo used in AGC algo => NEED MORE INVESTIGATION. return(flist); } /*-------------------------------------------------------*/ /* l1pa_send_int_meas_report() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function builds and sends the Interf. Meas. */ /* report to L3 */ /* */ /*-------------------------------------------------------*/ void l1pa_send_int_meas_report(UWORD32 SignalCode, T_L1P_ITMEAS_IND *last_l1s_msg, T_L1A_INT_MEAS_PARAM *first_meas_ptr) { xSignalHeaderRec *msg; UWORD8 i,j,k; UWORD8 bit_mask = 0x80; // Allocate report msg and fill signal code. msg = os_alloc_sig(sizeof(T_MPHP_INT_MEAS_IND)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = SignalCode; // Save measurement results //------------------------- for(i = 0, j = 0, k = 0; i < 8; i++, bit_mask >>= 1) { // Fill 1st measurement report //---------------------------- // If a measurement was done on timeslot i if(first_meas_ptr->meas_bitmap & bit_mask) { // The result is stored in the msg. ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[0] = first_meas_ptr->rxlev[j]; // Next measurement value j++; } else { // No measurement processed on timeslot i (0x80 value) ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[0] = (WORD8)NO_MEAS; //omaps00090550 } // Fill 2nd measurement report //---------------------------- // If a measurement was done on timeslot i if(last_l1s_msg->meas_bitmap & bit_mask) { // The result is stored in the msg. ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[1] = last_l1s_msg->rxlev[k]; // Next measurement value k++; } else { // No measurement processed on timeslot i (0x80 value) ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->int_meas[i].rxlev[1] = (WORD8)NO_MEAS; } } // Set ID in the report message ((T_MPHP_INT_MEAS_IND *) (msg->SigP))->id = first_meas_ptr->id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(msg); #endif os_send_sig(msg, GRRM1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } /*-------------------------------------------------------*/ /* l1pa_send_confirmation() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ void l1pa_send_confirmation(UWORD32 SignalCode, UWORD8 id) { xSignalHeaderRec *msg_con; msg_con = os_alloc_sig(sizeof(T_MPHP_ASSIGNMENT_CON)); DEBUGMSG(status,NU_ALLOC_ERR) msg_con->SignalCode = SignalCode; ((T_MPHP_ASSIGNMENT_CON *) msg_con->SigP)->assignment_id = id; #if (TRACE_TYPE==1) || (TRACE_TYPE==4) l1_trace_message(msg_con); #endif os_send_sig(msg_con, GRRM1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } /*-------------------------------------------------------*/ /* l1pa_send_tbf_release_con() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ void l1pa_send_tbf_release_con(UWORD32 SignalCode, UWORD8 tbf_type) { xSignalHeaderRec *conf_msg; // Send the confirmation message with the TBF type to L3 // Allocate confirmation message... conf_msg = os_alloc_sig( sizeof(T_MPHP_TBF_RELEASE_CON)); DEBUGMSG(status,NU_ALLOC_ERR); //Fill the message conf_msg->SignalCode = SignalCode; ((T_MPHP_TBF_RELEASE_CON *)(conf_msg->SigP))->tbf_type = tbf_type; // Send the confirmation message... os_send_sig(conf_msg, GRRM1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } #endif //L1_GPRS