view src/cs/riviera/rvf/rvf_env.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  Name        rvf_env.h                                                   */
/*                                                                          */
/*  Function    this file contains rvf definitions specific for the RVM.	*/
/*                                                                          */
/*  Version		0.1															*/
/*																			*/
/* 	Date       	Modification												*/
/*  ------------------------------------									*/
/*  28/01/2000	Create														*/
/*																			*/
/*	Author		David Lamy-Charrier (dlamy@tif.ti.com)						*/
/*																			*/
/* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#ifndef _RVF_ENV_H
#define _RVF_ENV_H

#include "rvf/rvf_api.h"




/* return the size of the available memory in bytes */
T_RVF_RET rvf_get_available_mem( UINT32 * total_size, UINT32 * used_size );

/* get the parameters of a specific memory bank */
T_RVF_RET rvf_get_mb_param( T_RVF_MB_NAME mb_name, T_RVF_MB_PARAM * param);

/* change the parameters of a specific memory bank */
T_RVF_RET rvf_set_mb_param( T_RVF_MB_NAME mb_name, T_RVF_MB_PARAM * param);

/* retrieve the amount of memory available before the memory bank size */
UINT32	rvf_get_mb_unused_mem(T_RVF_MB_ID mb_id);

/* retrieve the amount of memory available before the memory bank watermark */
UINT32	rvf_get_mb_unused_green_mem(T_RVF_MB_ID mb_id);





#endif	/* _RVF_ENV_H */