view src/cs/riviera/rvf/rvf_trace_adapt.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  Name        rvf_trace_adapt.c                                           */
/*                                                                          */
/*  Function    this file is used to trace messages if TRACE module is      */
/*              activated or not                                            */
/*                                                                          */
/*  Version		0.1															*/
/*																			*/
/* 	Date       	Modification												*/
/*  ------------------------------------									*/
/*  03/19/2001		Create													*/
/*																			*/
/*	Author		Pascal Puel (p-puel@tif.ti.com)								*/
/*																			*/
/* (C) Copyright 1999 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/


#ifndef _WINDOWS
	#include "config/rv.cfg"
	#include "config/trace.cfg"
#endif

#include "rv/general.h"
#include "rv/rv.h"
#include "rv/rv_general.h"
#include "rvf/rvf_api.h"

#include "rvt/rvt_gen.h"

#include "rvm/rvm_use_id_list.h"

#include <string.h>

/* DAR files used to redirect trace to DAR entity */
//#ifdef RVM_DAR_SWE
//	#include "dar_api.h"
//	#include "dar_gen.h"
//	#include "dar_structs_i.h"
//	#include "dar_diagnose_i.h"

	/* Define a pointer to the DAR Global Environment Control block   */
//	extern T_DAR_ENV_CTRL_BLK *dar_gbl_var_p;
//#endif

UINT8 rvf_trace_level = TRACE_LEVEL_FILTER;
UINT32 rvf_layer_mask = LAYER_DBG;

/* Decimal to hexadecimal conversion table */
static const char Num2Char[] = {'0','1','2','3','4','5','6','7','8','9','A','B','C','D','E','F'};

extern T_RVT_USER_ID rv_trace_user_id;

#ifndef FRAMING_PROTOCOL
void rvf_send_trace1 (char * msg, UINT8 msg_length, UINT32 val, UINT8 TRACE_LEVEL, UINT32 swe_use_id)
{	
	UINT32 trace_type = swe_use_id;

	/* Apply the appropriate compilation flags to filter trace messages based on
	their type and level */
	if ((TRACE_LEVEL < RV_TRACE_LEVEL_WARNING) ||
		((TRACE_LEVEL <= rvf_trace_level) &&
		 (((trace_type & rvf_layer_mask & 0x0000FFFF) == (trace_type & 0x0000FFFF)) ||
		  ((trace_type & rvf_layer_mask & 0xFFFF0000) != (trace_type & 0xFFFF0000)))))
		{
			char * buff;

			if (val == NULL_PARAM)
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length, (T_RVT_BUFFER *)&buff);
				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{
					/* Copy the body of the message */
					memcpy( buff, msg, msg_length);
					rvt_send_trace_no_cpy( buff, rv_trace_user_id, msg_length, RVT_ASCII_FORMAT);
				}
			}
			else
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length +11, (T_RVT_BUFFER *)&buff);
				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{	
					UINT8 i;
				
					/* Copy the body of the message */
					memcpy( buff, msg, msg_length);

					((char *)buff)[msg_length]		= ' ';
					((char *)buff)[msg_length + 1]	= '0'; 
					((char *)buff)[msg_length + 2]	= 'x';
					
					for (i=0; i<8; i++)
					{
						((char *)buff)[msg_length+3+i] = Num2Char[(UINT8)((val<<(i<<2))>>28)];
					}
					rvt_send_trace_no_cpy(buff, rv_trace_user_id, msg_length + 11, RVT_BINARY_FORMAT);
				}
			}
		}
}
#else
/********************************* VERSION WITH TRACE MUX **************************/

void rvf_send_trace1 (char * msg, UINT8 msg_length, UINT32 val, UINT8 TRACE_LEVEL, UINT32 swe_use_id)
{	
	UINT32 trace_type = swe_use_id;

	/* Apply the appropriate compilation flags to filter trace messages based
	on their type and level */
	if ((TRACE_LEVEL < RV_TRACE_LEVEL_WARNING) ||
		((TRACE_LEVEL <= rvf_trace_level) &&
		 (((trace_type & rvf_layer_mask & 0x0000FFFF) == (trace_type & 0x0000FFFF)) ||
		  ((trace_type & rvf_layer_mask & 0xFFFF0000) != (trace_type & 0xFFFF0000)))))
		{
			char * buff;

			if (val == NULL_PARAM)
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length+5, (T_RVT_BUFFER *)&buff);

				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{
					/* Add the trace type (MSB and LSB) and Trace level	*/
					buff [0] = (char) (trace_type >> 24);
					buff [1] = (char) (trace_type >> 16);
					buff [2] = (char) (trace_type >> 8);
					buff [3] = (char) (trace_type & 0xff);
					buff [4] = (char) TRACE_LEVEL;

					/* Copy the message in the new buffer */
					memcpy(buff+5, msg, msg_length);
					
					/* Send the trace message */
					rvt_send_trace_no_cpy ((T_RVT_BUFFER) buff, rv_trace_user_id, msg_length+5, RVT_BINARY_FORMAT);
				}
			}
			else
			{
				rvt_mem_alloc (rv_trace_user_id, msg_length+16, (T_RVT_BUFFER *)&buff);

				if (buff != NULL) /* Check if there is enough memory for the buffer */
				{	
					UINT8 i;

					/* Add the trace type (MSB and LSB) and Trace level	*/
					buff [0] = (char) (trace_type >> 24);
					buff [1] = (char) (trace_type >> 16);
					buff [2] = (char) (trace_type >> 8);
					buff [3] = (char) (trace_type & 0xff);
					buff [4] = (char) TRACE_LEVEL;

					/* Copy the message in the new buffer */
					memcpy( buff + 5, msg, msg_length);
					
					buff[5+msg_length]		= ' ';
					buff[5+msg_length + 1]	= '0'; 
					buff[5+msg_length + 2]	= 'x';
					
					for (i=0; i<8; i++)
					{
						((char *)buff)[8+msg_length+i] = Num2Char[(UINT8)((val<<(i<<2))>>28)];
					}

					/* Send the trace message */
					rvt_send_trace_no_cpy ((T_RVT_BUFFER) buff, rv_trace_user_id, msg_length+16, RVT_BINARY_FORMAT);
				}
			}
		}
}
#endif