FreeCalypso > hg > fc-tourmaline

view src/cs/services/etm/etm_tmpwr.c @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/******************************************************************************
 * Enhanced TestMode (PWR)
 * Copyright Texas Instruments, 2003
 * Svend Kristian Lindholm, skl@ti.com
 *
 * $Id: tmpwr.c 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/

#include "etm/etm.h"
#include "etm/etm_trace.h"
#include "etm/etm.h"
#include "etm/etm_env.h"
#include "etm/etm_api.h"
#include "etm/etm_misc.h"

#include "rv/rv_general.h"
#include "rv/rv_defined_swe.h"

#include "memif/mem.h"
#include <string.h>


#include "rv/rv_defined_swe.h"
#define TRACE_WANTED 1
#include "lcc/lcc_api.h"
#include "lcc/lcc_cfg_i.h"
#include "lcc/lcc.h"
#include "lcc/lcc_trace.h"
#include "lcc/lcc_tm_i.h"
#include "lcc/lcc_task.h"
#include "lcc/lcc_modulate.h"
#include "ffs/ffs.h"

/******************************************************************************
 * Globals
 *****************************************************************************/

extern T_ETM_ENV_CTRL_BLK *etm_env_ctrl_blk;
extern T_PWR_CTRL_BLOCK *pwr_ctrl;
extern T_PWR_CFG_BLOCK *pwr_cfg;


/******************************************************************************
 * EMT PWR Version
 *****************************************************************************/
/* 
The version of the etm pwr module can be found in the file etm_version.h
*/

/******************************************************************************
 * ETM PWR Module
 *****************************************************************************/
// pwr uplink packet structure for pwr read/write : 
// |fid|index|--data(W)--|

int etm_pwr(uint8 *indata, int insize);

/******************************************************************************
 * Register the PWR Module to the ETM database 
 *****************************************************************************/

int etm_pwr_init(void)
{
    return etm_register("PWR", ETM_PWR, 0, 0, etm_pwr);
}


int etm_pwr(uint8 *buf, int insize)
{
    int error = ETM_OK;
    uint8 fid, size, index,i;
    T_ETM_PKT *pkt = NULL;  
    T_FFS_STAT stat;
    char name[20], id;

    ttw(pwr_ttr(TTrInit, "etm_pwr(%d)" NL, 0));

    fid = *buf;

    ttw(pwr_ttr(TTrInit, "insize = %d " NL, insize));
       
    /* Create TestMode return Packet */
    if ((pkt = (T_ETM_PKT *) etm_malloc(sizeof(T_ETM_PKT))) == NULL) {
        return ETM_NOMEM;
    }
    
    // Init. of return packet
    pkt->mid     = ETM_PWR;
    pkt->status  = ETM_OK;
    pkt->size    = 0;
    pkt->index   = 0;
    etm_pkt_put8(pkt, fid);

    index = *(buf+1);
    etm_pkt_put8(pkt, index);
    
    name[0] = 0; // FIXME: Really needed?

    for (i=0; i<insize; i++) {
        ttw(ttr(TTrTmpwr, "buf[%d]=%d" NL,i, (*(buf+i))));
    }

    switch (fid) {
    case 'R':
	ttw(ttr(TTrTmpwr,"pwr (%d)" NL, 0));

	// All reads start from index 2 since the fid + index is kept
	switch (index) {
	case PWR_CFG_ID :
	    // We can read different configurations swiching between them using pwtw
	    size = PWR_CFG_ID_SIZE;
	    *(buf+2) = pwr_ctrl->cfg_id;
	    *(buf+3) = pwr_ctrl->chg_cfg_id;
	    ttw(ttr(TTrTmpwr,"Using cfg_id %d" NL, *(buf+2)));
	    ttw(ttr(TTrTmpwr,"Using chg_cfg_id %d" NL, *(buf+3)));

	    // If either the bat.cfg or the chg.cfg lacks object not found is returned

	    // If (battery) file can't be stat'ed then the configuration doesn't exist
	    id = *(buf+2) + '0';
	    build_name("/pwr/bat/bat", &id, 12, ".cfg", name);
	    error = ffs_stat(name, &stat);

	    // If charger file can't be stat'ed then the configuration doesn't exist
	    id = *(buf+3) + '0';
	    build_name("/pwr/chg/chg", &id, 12, ".cfg", name);
	    error = ffs_stat(name, &stat);
	    break;
	case PWR_COMMON :
	    // Read the /pwr/common.cfg file
	    // NOTE: sizeof(pwr_cfg->common) = 16 <>  (14 byte alignment)
	    size = PWR_COMMON_CFG_SIZE;
	    error = ffs_fread("/pwr/common.cfg", buf+2, size);
	    ttw(ttr(TTrTmpwr,"Read %d bytes" NL, error));
	    break;
	case PWR_CHG :
	    // Read the /pwr/chg/chg<cfgid>.cfg file
	    size = PWR_CHG_CFG_SIZE;
	    id = pwr_ctrl->chg_cfg_id + '0';
	    build_name("/pwr/chg/chg", &id, 12, ".cfg", name);
	    error = ffs_fread(name, buf+2, size);
	    ttw(ttr(TTrTmpwr, "Read %d bytes " NL, error));
	    break;
	case PWR_BAT :
	    // Read the /pwr/bat/bat<cfgid>.cfg file
	    size = PWR_BAT_CFG_SIZE;
	    id = pwr_ctrl->cfg_id + '0';
	    build_name("/pwr/bat/bat", &id, 12, ".cfg", name);
	    error = ffs_fread(name, buf+2, size);
	    ttw(ttr(TTrTmpwr,"Read %d bytes" NL, error));
	    break;
	case PWR_TEMP :
	    // Read the /pwr/bat/temp<cfgid>.cfg file
	    size = PWR_TEMP_CFG_SIZE;
	    id = pwr_ctrl->cfg_id + '0';
	    build_name("/pwr/bat/temp", &id, 13, ".cfg", name);
	    error = ffs_fread(name, buf+2, size);
	    ttw(ttr(TTrTmpwr,"Read %d bytes" NL, error));
	    break;
	case PWR_MMI:
	    // Read the /mmi/pwr/bsie.cfg file
	    size = PWR_MMI_CFG_SIZE;
	    error = ffs_fread("/mmi/pwr/bsie.cfg", buf+2, size);
	    ttw(ttr(TTrTmpwr,"Read %d bytes" NL, error));
	    break;
	case PWR_I2V_CAL :
	    // Read the /pwr/i2v.cal file
	    size = PWR_I2V_CAL_SIZE;
	    error = ffs_fread("/pwr/i2v.cal", buf+2, size);
	    ttw(ttr(TTrTmpwr,"Read %d bytes" NL, error));
	    break;
	case PWR_VBAT_CAL :
	    // Read the /pwr/vbat.cal file
	    size = PWR_VBAT_CAL_SIZE;
	    error = ffs_fread("/pwr/vbat.cal", buf+2, size);
	    ttw(ttr(TTrTmpwr,"Read %d bytes" NL, error));
	    break;
	case PWR_MMI_TEST :
#if (TEST_PWR_MMI_INTERFACE == 1)
	    // Trigger MMI registration 
	    return_path.callback_func = mmi_test_cb_function;
	    ttw(ttr(TTrInit,"before: &mmi_test_cb_function=(0x%x)" NL, return_path.callback_func));
	    return_path.addr_id = NULL; // FIXME??
	    ttw(ttr(TTrTmpwr,"MMI testing callback: %d" NL, 0x0));
	    size = 1;
	    *(buf+2) = 0xBA;
	    pwr_register(&return_path, &mmi_data);
	    ttw(ttr(TTrInit,"after: &mmi_test_cb_function=(0x%x)" NL, pwr_ctrl->rpath.callback_func));
	    ttw(ttr(TTrTmpwr,"MMI testing callback: %d" NL, 0xFF));
#endif
	    break;
	case PWR_DYNAMIC :
	    // Dump 'dynamic' configuration data to trace
	    size = PWR_DYNAMIC_SIZE;
	    *(buf+2) = 0xBA;
	    ttr(TTrAll,"*PWR Module Version = 0x%x" NL, PWRVERSION );
	    ttr(TTrAll,"*bat_id = %d" NL,               pwr_cfg->data.bat_id );
	    ttr(TTrAll,"*state = %d" NL,                pwr_ctrl->state);
	    ttr(TTrAll,"*chg_id = %d" NL,               pwr_cfg->data.chg_id );
	    ttr(TTrAll,"*Vbat = %d" NL,                 pwr_cfg->data.Vbat);
	    ttr(TTrAll,"*Vbat_avg = %d" NL,             pwr_cfg->data.Vbat_avg);
	    ttr(TTrAll,"*Vbat_avg_mV = %d" NL,          pwr_cfg->data.Vbat_avg_mV);
	    ttr(TTrAll,"*Tbat = %d" NL,                 pwr_cfg->data.Tbat);
	    ttr(TTrAll,"*Tbat_avg = %d" NL,             pwr_cfg->data.Tbat_avg);
	    ttr(TTrAll,"*Vchg = %d" NL,                 pwr_cfg->data.Vchg);
	    ttr(TTrAll,"*Ichg = %d" NL,                 pwr_cfg->data.Ichg);
	    ttr(TTrAll,"*Cbat = %d" NL,                 pwr_cfg->data.Cbat);
	    ttr(TTrAll,"*cfg_id = %d" NL,               pwr_cfg->data.cfg_id);
	    ttr(TTrAll,"*chg_cfg_id = %d" NL,           pwr_cfg->data.chg_cfg_id);
	    ttr(TTrAll,"*bforce = %d" NL,               pwr_cfg->data.bforce);
	    ttr(TTrAll,"*cforce = %d" NL,               pwr_cfg->data.cforce);
	    ttr(TTrAll,"*k = %d" NL,                    pwr_cfg->data.k);
	    ttr(TTrAll,"*T4 = %d" NL,                   pwr_cfg->data.T4);
	    ttr(TTrAll,"*T1 elapsed = %d" NL,           pwr_ctrl->time_elapsed_T1);
	    ttr(TTrAll,"*T2 elapsed = %d" NL,           pwr_ctrl->time_elapsed_T2);
	    ttr(TTrAll,"*T3 elapsed = %d" NL,           pwr_ctrl->time_elapsed_T3);
	    ttr(TTrAll,"*MMI timer elapsed = %d" NL,    pwr_ctrl->time_elapsed_mmi_rep);
	    error = PWR_OK;
	    break;
	case PWR_TRACE_MASK:
	    // Read the trace mask of the PWR module 
	    size = PWR_TMASK_SIZE;
	    memcpy(buf+2, &pwr_ctrl->tmask, size);
	    ttw(ttr(TTrTmpwr,"tmask: 0x%x" NL, pwr_ctrl->tmask));
	    break;
	default :
	    {
	     // Unknown index
	    error = PWR_INDEX;
	    ttr(TTrWarning, "Unknown index! %d" NL, index);
	    }
	}

	etm_pkt_putdata(pkt, buf+2 , size);
        break;
    case 'W':

	ttw(ttr(TTrTmpwr,"pww (%d)" NL, 0));
	switch (index) {
	case PWR_CFG_ID :
	    // Write the configuration id to be used
	    pwr_ctrl->cfg_id = *(buf+2);
	    pwr_ctrl->chg_cfg_id = *(buf+3);
	    pwr_cfg->data.cfg_id = pwr_ctrl->cfg_id + '0';
	    pwr_cfg->data.chg_cfg_id = pwr_ctrl->chg_cfg_id + '0';
	    ttw(ttr(TTrTmpwr,"Switched to bat id=%d" NL, pwr_ctrl->cfg_id));
	    ttw(ttr(TTrTmpwr,"Switched to chg id=%d" NL, pwr_ctrl->chg_cfg_id));
	    break;
	case PWR_COMMON :
	    // Write the /pwr/common.cfg file
	    // Blocking version of ffs_fwrite is used since this is a test mode command
	    error = ffs_fwrite("/pwr/common.cfg", buf+2, PWR_COMMON_CFG_SIZE);
	    ttw(ttr(TTrTmpwr,"Wrote %d bytes" NL, error));
	    break;
	case PWR_CHG :
	    // Write the /pwr/chg/chg<cfgid>.cfg file
	    size = PWR_CHG_CFG_SIZE;
	    id = pwr_ctrl->chg_cfg_id + '0';
	    build_name("/pwr/chg/chg", &id, 12, ".cfg", name);
	    error = ffs_fwrite(name, buf+2, size);
	    ttw(ttr(TTrTmpwr, "Wrote %d bytes = %d" NL, error));
	    break;
	case PWR_BAT :
	    // Write the /pwr/bat/bat<cfgid>.cfg file
	    size = PWR_BAT_CFG_SIZE;
	    id = pwr_ctrl->cfg_id + '0';
	    build_name("/pwr/bat/bat", &id, 12, ".cfg", name);
	    error = ffs_fwrite(name, buf+2, size);
	    ttw(ttr(TTrTmpwr, "Wrote %d bytes = %d" NL, error));
	    break;
	case PWR_TEMP :
	    // Write the /pwr/bat/temp<cfgid>.cfg file
	    size = PWR_TEMP_CFG_SIZE;
	    id = pwr_ctrl->cfg_id + '0';
	    build_name("/pwr/bat/temp", &id, 13, ".cfg", name);
	    error = ffs_fwrite(name, buf+2, size);
	    ttw(ttr(TTrTmpwr, "Wrote %d bytes = %d" NL, error));
	    break;
	case PWR_MMI:
	    // Write the /mmi/pwr/bsie.cfg file
	    size = PWR_MMI_CFG_SIZE;
	    error = ffs_fwrite("/mmi/pwr/bsie.cfg", buf+2, size);
	    ttw(ttr(TTrTmpwr, "Wrote %d bytes = %d" NL, error));
	    break;
	case PWR_I2V_CAL :
	    // Write the /pwr/i2v.cal file
	    error = ffs_fwrite("/pwr/i2v.cal", buf+2, PWR_I2V_CAL_SIZE);
	    ttw(ttr(TTrTmpwr,"Wrote %d bytes" NL, PWR_I2V_CAL_SIZE));
	    break;
	case PWR_VBAT_CAL:
	    // Write the /pwr/vbat.cal file
	    error = ffs_fwrite("/pwr/vbat.cal", buf+2, PWR_VBAT_CAL_SIZE);
	    ttw(ttr(TTrTmpwr,"Wrote %d bytes" NL, PWR_VBAT_CAL_SIZE));
	    break;
	case PWR_MMI_TEST :
	    break;
	case PWR_TRACE_MASK:
	    // Write the trace mask of the PWR module 
	    memcpy(&pwr_ctrl->tmask, buf+2, sizeof(pwr_ctrl->tmask));
	    ttw(ttr(TTrTmpwr,"Wrote tmask 0x%x" NL, pwr_ctrl->tmask));
	    pwr_ttr_init(pwr_ctrl->tmask);
	    break;
	default :
	    {
	     // Unknown index
	    error = PWR_INDEX;
	    ttr(TTrWarning, "Unknown index! %d" NL, index);
	    }
	}

	size = 0; // Size of write message reply is always 0

        break;
    default:
        pwr_ttr(TTrWarning, "etm_pwr: fid unknown (%d)" NL, fid);
        error = ETM_NOSYS;
        break;
    }
    
    for (i=0; i<size+2; i++) {
        ttw(ttr(TTrTmpwr, "buf[%d]=0x%x" NL, i, (*(buf+i))));
    }

    if (error < 0) {
        pwr_ttr(TTrWarning, "etm_pwr: error %d" NL, error);
        pkt->status = -error;

    }

    pkt->size += size;

    etm_pkt_send(pkt);
    etm_free(pkt);

    ttw(pwr_ttr(TTrInit, "etm_pwr(%d)" NL, 0xFF));
    return ETM_OK;
}