view src/g23m-aci/aci/aci_bat_cphs.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 

#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 
#include "aci_bat.h"
#include "cphs.h"
#include "aci_cphs.h"
#include "aci_cmd.h"

/*
 * commonly used query for %CPCFU and %CPVWI
 * %CPCFU: <status>[,<line>]
 * %CPVWI: <status>[,<line>]
 *
 * status acts as a global status information for all lines.
 * if any line is set then status is set/activated
 * and in the line bit field you can check which one.
 * the strange thing is that the numerical value for status
 * is exactly complementary between %CPCFU and %CPVWI
 * see also 8415_052.doc
 */
LOCAL T_ACI_BAT_RSLT query_cphs_lines (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd,
                                       T_CPHS_LINES       lines)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_RETURN (*fptr)(T_ACI_CMD_SRC srcId, U8 *cfu_set, T_CPHS_LINES line);
  T_CPHS_LINES line         = CPHS_LINE_NULL;
  T_CPHS_LINES line_bitmask = CPHS_LINE_NULL;
  U16          i, end;
  U8           flag_set;

  T_BAT_res_set_percent_cpvwi cpvwi;
  T_BAT_res_set_percent_cpcfu cpcfu;
  T_BAT_cmd_response          resp; 
 
  switch (cmd->ctrl_params)
  {
    case (BAT_CMD_SET_PERCENT_CPCFU):
    {
      fptr = qAT_PercentCPCFU;
      break;
    }
    case (BAT_CMD_SET_PERCENT_CPVWI):
    {
      fptr = qAT_PercentCPVWI;
      break;
    }
    default:
    {
      return (ACI_BAT_FAIL);
    }
  }

  end = 8 * sizeof(T_CPHS_LINES);
  /* rotate over all bits */
  for (i=0; i<end; i++)
  {
    line = 1 << i;
    if (lines & line)
    {
      ret = (T_ACI_BAT_RSLT)fptr((T_ACI_CMD_SRC)src_infos_psi->srcId, &flag_set, line);

      if(ret NEQ (T_ACI_BAT_RSLT)AT_CMPL)
      {
        return(ACI_BAT_FAIL);
      }

      if(flag_set EQ CPHS_FLAG_ACTIVATED)
      {
        line_bitmask |= line;
      }
    }
    else
    {
      continue; /* bit not set --> do not check this line */
    } 
  }

  switch (cmd->ctrl_params)
  {
    case (BAT_CMD_SET_PERCENT_CPCFU):
    {
      cpcfu.line = (T_BAT_percent_cpcfu_line)line_bitmask;
      cpcfu.status = (line_bitmask EQ CPHS_LINE_NULL) 
                     ? BAT_P_CPCFU_STATUS_DEACTIVATE
                     : BAT_P_CPCFU_STATUS_ACTIVATED;    
      resp.ctrl_response = BAT_RES_SET_PERCENT_CPCFU;
      resp.response.ptr_set_percent_cpcfu = &cpcfu;
      /* 
       * according to 8415_052.doc CPCFU status: 0 Activated, 1 Deactivated,
       * which must be an error, because on ATI the status is given as 1, when any line has been set.
       * But the nice thing with BAT is the using of symbolic constants, where the actual numeric
       * value for BAT_P_CPCFU_STATUS_ACTIVATED is unimportant as long as the client code uses it.
       * If they use numerical value instead of symbolic constant, then ... we cannot help ...
       */
      TRACE_EVENT_P2("query_cphs_lines(): status = %i, line = 0x%02X",cpcfu.status, cpcfu.line);
      break;
    }
    case (BAT_CMD_SET_PERCENT_CPVWI):
    {
      cpvwi.line = (T_BAT_percent_cpvwi_lines)line_bitmask;
      cpvwi.status = (line_bitmask EQ CPHS_LINE_NULL) 
                     ? BAT_P_CPVWI_FLAG_DEACTIVATED
                     : BAT_P_CPVWI_FLAG_ACTIVATED;
      resp.ctrl_response = BAT_RES_SET_PERCENT_CPVWI;
      resp.response.ptr_set_percent_cpvwi = &cpvwi;
      TRACE_EVENT_P2("query_cphs_lines(): status = %i, line = 0x%02X",cpvwi.status, cpvwi.line);
      break;
    }
    default:
    {
      return (ACI_BAT_FAIL);
    }
  }

  aci_bat_send(src_infos_psi, &resp);
  return (ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPHS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPHS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentCPHS()");
  ret = (T_ACI_BAT_RSLT)sAT_PercentCPHS((T_ACI_CMD_SRC)src_infos_psi->srcId, 
                        (T_ACI_CPHS_INIT)cmd->params.ptr_set_percent_cphs->init_mode); 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCPHS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPHS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cphs cphs;

  TRACE_FUNCTION ("qBAT_PercentCPHS()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_CPHS; 
  resp.response.ptr_que_percent_cphs = &cphs;

  ret = (T_ACI_BAT_RSLT)qAT_PercentCPHS((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_CPHS_INIT*)&cphs.init_mode); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPNUMS   |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPNUMS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                         T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentCPNUMS()");

  ret = (T_ACI_BAT_RSLT)sAT_PercentCPNUMS((T_ACI_CMD_SRC)src_infos_psi->srcId, 
                          cmd->params.ptr_set_percent_cpnums->element_id, 
                          (U8)cmd->params.ptr_set_percent_cpnums->mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentCPNUMS   |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentCPNUMS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                         T_BAT_cmd_send    *cmd)
{
  return(ACI_BAT_FAIL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPALS    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PercentCPALS()");
  /* adjust the left hand side
    xxx = cmd->params.ptr_set_percent_cpals->call_id;
  */
  /* hmm, do not know which ACI function to call ! */ 
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCPALS    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPALS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cpals cpals;

  T_CPHS_LINES  active_line; 
  CHAR          *line_desc; 
  U8            max_line_desc = 30; /* should be enough ! */ 

  TRACE_FUNCTION ("qBAT_PercentCPALS()");

  MALLOC(line_desc, max_line_desc);

  resp.ctrl_response = BAT_RES_QUE_PERCENT_CPALS; 
  resp.response.ptr_que_percent_cpals = &cpals;

  ret = (T_ACI_BAT_RSLT)qAT_PercentCPALS((T_ACI_CMD_SRC)src_infos_psi->srcId, 
                          (U8)cpals.lines,
                          &active_line,
                          line_desc, 
                          &max_line_desc);
  MFREE(line_desc);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPVWI    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPVWI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_CPHS_LINES lines = CPHS_LINE_NULL;

  TRACE_FUNCTION ("sBAT_PercentCPVWI()");

  /* According to 8415_52.doc the parameter line is mandatory,
   * but implementation in ATI/ACI allows this one to be omittable.
   * So, BAT goes with them. In case of line is omitted, 
   * set it to all possible. Else leave the bitfield as is (BAT == ACI).
   */
  if (cmd->params.ptr_set_percent_cpvwi->lines EQ BAT_P_CPVWI_LINES_NOT_PRESENT)
  {
    lines = CPHS_LINE1 + CPHS_LINE_DATA + CPHS_LINE_FAX + CPHS_LINE2;   
  }
  else
  {
    lines = cmd->params.ptr_set_percent_cpvwi->lines;
  }

  if (cmd->params.ptr_set_percent_cpvwi->mode EQ BAT_P_CPVWI_MODE_QUERY)
  {
    ret = query_cphs_lines(src_infos_psi, cmd, lines);
  }
  else
  {  
    ret = (T_ACI_BAT_RSLT)sAT_PercentCPVWI((T_ACI_CMD_SRC)src_infos_psi->srcId, 
                           (U8)cmd->params.ptr_set_percent_cpvwi->mode,
                           lines);
  }

  return(ret);

}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCPOPN    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPOPN(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cpopn cpopn;

  TRACE_FUNCTION ("qBAT_PercentCPOPN()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_CPOPN; 
  resp.response.ptr_que_percent_cpopn = &cpopn;

  ret = (T_ACI_BAT_RSLT)qAT_PercentCPOPN((T_ACI_CMD_SRC)src_infos_psi->srcId,
                          (CHAR*)cpopn.long_name, 
                          &cpopn.c_long_name,
                          (CHAR*)cpopn.short_name, 
                          &cpopn.c_short_name);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPINF    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPINF(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_set_percent_cpinf *cpinf = cmd->params.ptr_set_percent_cpinf;
  UBYTE  serv_group[CPHS_MAX_CSP];
  UBYTE  serv_len = 0;

  TRACE_FUNCTION ("sBAT_PercentCPINF()");

  memset(serv_group,0,sizeof(serv_group));

  /* CSP exceeding maximum value display text too long */
  if ( cpinf->c_csp > BAT_MAX_CPINF_CSP_LEN )
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_TxtToLong);
    return(ACI_BAT_FAIL);
  }

  serv_len = utl_HexStrToBin((UBYTE*)cpinf->csp, cpinf->c_csp, serv_group, CPHS_MAX_CSP);
  
  /* Odd length CSP or empty CSP display operation not allowed */
  if(((serv_len % 2) NEQ 0) OR (serv_len EQ 0))
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow);
    return(ACI_BAT_FAIL);
  }

  ret = (T_ACI_BAT_RSLT)sAT_PercentCPINF( (T_ACI_CMD_SRC)src_infos_psi->srcId,
                          serv_group,
                          serv_len);

  return(ret);
}
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCPINF    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPINF(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_RETURN ret = AT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cpinf cpinf;

  TRACE_FUNCTION ("qBAT_PercentCPINF()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_CPINF; 
  resp.response.ptr_que_percent_cpinf = &cpinf;

  cpinf.phase = BAT_P_CPINF_PHASE_1;
  cpinf.sst   = 0;
  cpinf.c_csp = BAT_MAX_CPINF_CSP_LEN;/* Since the BAT_MAX_CPINF_CSP_LEN length has been updated to 22,then there is no need of BAT_MAX_CPINF_CSP2_LEN */  
  cpinf.c_csp2 = BAT_MAX_CPINF_CSP_LEN;
  memset(cpinf.csp, 0x00, BAT_MAX_CPINF_CSP_LEN);
  memset(cpinf.csp2, 0x00, BAT_MAX_CPINF_CSP_LEN);

  ret = (T_ACI_RETURN)qAT_PercentCPINF((T_ACI_CMD_SRC)src_infos_psi->srcId,
                          (U8*)&cpinf.phase,
                          &cpinf.sst, 
                          (CHAR*)cpinf.csp,
                          (CHAR*)cpinf.csp2,
                          &cpinf.c_csp,
                          &cpinf.c_csp2);

  if (ret EQ AT_CMPL)
  {
    aci_bat_send(src_infos_psi, &resp);
    return (ACI_BAT_CMPL);
  }

  return (ACI_BAT_FAIL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPMB     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPMB(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_CPHS_LINES line;
  CHAR number[CPHS_MAX_MB_NUMBER_LEN];
  CHAR alpha_id[CPHS_MAX_MB_ALPHA_LEN];
  T_ACI_TOA_TON ton;
  T_ACI_TOA_NPI npi;

  TRACE_FUNCTION ("sBAT_PercentCPMB()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PercentCPMB(
    (T_ACI_CMD_SRC)src_infos_psi->srcId,
    (UBYTE)cmd->params.ptr_set_percent_cpmb->record_id,
    &line,number,&ton,&npi,alpha_id,NULL);

  /*
  *   If the query completes, send the response now.
  */
  if (ret EQ ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_percent_cpmb cpmb_data;
    UBYTE len;
    T_ACI_TOA toa;
 
    resp.ctrl_response=BAT_RES_SET_PERCENT_CPMB;
    resp.response.ptr_set_percent_cpmb=&cpmb_data;

    cpmb_data.record_id=(T_BAT_record_id)cmd->params.ptr_set_percent_cpmb->record_id;
    cpmb_data.line=(T_BAT_percent_cpmb_line)line;

    len=strlen(number);

    /*
    *   This is in line with the existing ATI implementation (see
    *   setatPercentCPMB()) and is necessary to pass tests such as
    *   ACI583.
    */ 
    if (len EQ 0)
    {
      ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_NotFound);
      return(ACI_BAT_FAIL);
    }

    /*
    *   Check that the number isn't too long for the BAT message, 
    *   if it is it will effectively be truncated.
    */
    if (len>BAT_MAX_CPMB_NUMBER_LEN)
      len=BAT_MAX_CPMB_NUMBER_LEN;

    if (len)
    {
      memcpy(cpmb_data.number,number,len);
      cpmb_data.v_number=TRUE;
      cpmb_data.c_number=(U8)len;
    }
    else
    {
      cpmb_data.v_number=FALSE;
    }

    len=strlen(alpha_id);

    if (len)
    {
      USHORT len_cvtd_text=0;

      /*
      *   Convert the data read from the SIM into the currently 
      *   selected character set.
      */
      utl_chsetFromSim(
        (UBYTE *)alpha_id,
        (USHORT)len,
        (UBYTE *)cpmb_data.alpha_id,
        BAT_MAX_CPMB_ALPHA_ID_LEN,
        &len_cvtd_text,
        GSM_ALPHA_Def);

      cpmb_data.v_alpha_id=TRUE;
      cpmb_data.c_alpha_id=(U8)len_cvtd_text;
    }
    else
    {
      cpmb_data.v_alpha_id=FALSE;
    }

    /*
    *   Get the type of number and numbering plan into a T_ACI_TOA structure
    *   so that we can use toa_merge().
    */
    toa.ton=ton;
    toa.npi=npi;

    /*
    *   BAT stores the type of address in a single 8-bit value (it is S16 in
    *   the message only to allow for a 'not present' value of -1).
    */
    cpmb_data.type=(S16)toa_merge(toa);

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCPMB     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPMB(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  UBYTE first;

  TRACE_FUNCTION ("qBAT_PercentCPMB()");

  /*
  *   Call the corresponding qAT function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PercentCPMB(
         (T_ACI_CMD_SRC)src_infos_psi->srcId,
    (UBYTE)ACI_NumParmNotPresent,NULL,NULL,NULL,NULL,NULL,&first);

  /*
  *   If the query completes, send the response now.
  */
  if (ret EQ ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_percent_cpmb cpmb_data;
 
    resp.ctrl_response=BAT_RES_QUE_PERCENT_CPMB;
    resp.response.ptr_que_percent_cpmb=&cpmb_data;

    cpmb_data.first=(U8)first;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPMBW    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPMBW(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_set_percent_cpmbw *cpmbw = cmd->params.ptr_set_percent_cpmbw;
  T_ACI_TOA type;
  T_ACI_TOA *p_type;
  CHAR number[BAT_MAX_CPMBW_NUMBER_LEN+1];
  CHAR *p_number;
  T_CPHS_PB_TEXT text;
  T_CPHS_PB_TEXT *p_text;

  TRACE_FUNCTION ("sBAT_PercentCPMBW()");

  if (cpmbw->type EQ -1)
  {
    p_type=NULL;
  }
  else
  {
    p_type=&type;
    type=toa_demerge(cpmbw->type);
  }

  if (cpmbw->v_number EQ FALSE)
  {
    p_number=NULL;
  }
  else
  {
    /*
    *   Mailbox number is present, so make a zero-terminated version
    *   and set a pointer to it.
    */
    p_number=number;
    memset(number,0,sizeof(number));
    memcpy(number,cpmbw->number,cpmbw->c_number);
  }

  if (cpmbw->v_text EQ FALSE)
  {
    p_text=NULL;
  }
  else
  {
    USHORT len;

    p_text=&text;

    /*
    *   Convert from the currently selected character set into the
    *   SIM format.
    */
    utl_chsetToSim(
      (UBYTE *)cpmbw->text,
      (USHORT)cpmbw->c_text,
      (UBYTE *)text.data,
      &len,
      GSM_ALPHA_Def);

    if (len>CPHS_MAX_MB_ALPHA_LEN)
    {
      /*
      *   Shouldn't get here as that would mean that memory has been
      *   overwritten. Currently utl_chsetToSim() has no specific mechanism
      *   to prevent this.
      */
      ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_TxtToLong);
      return(ACI_BAT_FAIL);
    }
          
    /*
    *   Set the length. Note that we cannot do this by passing a
    *   reference to text.len into utl_chsetToSim() because it is
    *   the wrong type.
    */
    text.len=(UBYTE)len;
    
    p_text=&text;
  }

  /*
  *   Call the corresponding sAT function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentCPMBW(
    (T_ACI_CMD_SRC)src_infos_psi->srcId, 
    (SHORT)cpmbw->record_id,
    p_number,
    p_type,
    p_text);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentCPMBW    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentCPMBW(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  SHORT          first_idx = 0;
  SHORT          last_idx  = 0;
  UBYTE          tlength   = 0;
  UBYTE          nlength   = 0;

  TRACE_FUNCTION ("tBAT_PercentCPMBW()");

  ret=(T_ACI_BAT_RSLT)tAT_PercentCPMBW((T_ACI_CMD_SRC)src_infos_psi->srcId,
                                       &first_idx,
                                       &last_idx,
                                       &nlength,
                                       &tlength);

  if (ret EQ ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_tst_percent_cpmbw cpmbw_data;
 
    resp.ctrl_response = BAT_RES_TST_PERCENT_CPMBW;
    resp.response.ptr_tst_percent_cpmbw = &cpmbw_data;

    cpmbw_data.min_rec_id = (U8)first_idx;
    cpmbw_data.max_rec_id = (U8)last_idx;
    cpmbw_data.nlength    = nlength;
    cpmbw_data.tlength    = tlength;

    /* 
     * currently c_type_range and type_range are initialized to zero
     * TODO : %CPMBW types
     */
    cpmbw_data.c_type_range = 0;
    cpmbw_data.type_range[0] = 0;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCPCFU    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCPCFU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_CPHS_LINES lines = CPHS_LINE_NULL;

  TRACE_FUNCTION ("sBAT_PercentCPCFU()");

  /* According to 8415_52.doc the parameter line is mandatory,
   * but implementation in ATI/ACI allows this one to be omittable.
   * So, BAT goes with them. In case of line is omitted, 
   * set it to all possible. Else leave the bitfield as is (BAT == ACI).
   */
  if (cmd->params.ptr_set_percent_cpcfu->line EQ BAT_P_CPCFU_LINE_NOT_PRESENT)
  {
    lines = CPHS_LINE1 + CPHS_LINE_DATA + CPHS_LINE_FAX + CPHS_LINE2;   
  }
  else
  {
    lines = cmd->params.ptr_set_percent_cpcfu->line;
  }

  if (cmd->params.ptr_set_percent_cpcfu->mode EQ BAT_P_CPCFU_MODE_QUERY)
  {
    ret = query_cphs_lines(src_infos_psi, cmd, lines);
  }
  else
  {  
    ret = (T_ACI_BAT_RSLT)sAT_PercentCPCFU((T_ACI_CMD_SRC)src_infos_psi->srcId,
                           (U8)cmd->params.ptr_set_percent_cpcfu->mode,
                            lines);
  }
  return(ret);
}