FreeCalypso > hg > fc-tourmaline

view src/g23m-aci/aci/aci_bat_sim.c @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 
 
#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci_bat.h"
#include "psa.h"
#include "cmh.h"
#include "audio.h"
#include "aci_ext_pers.h"
#include "aci_slock.h"



/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCPIN        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPIN        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  char pinOld [MAX_PWD_LENGTH]={0};  
  char pinNew [MAX_PWD_LENGTH]={0};
  char* p_pinNew;
  UBYTE slockBlocked = 0;
  
  TRACE_FUNCTION ("sBAT_PlusCPIN()");

  p_pinNew = pinNew;
  memset(pinOld,0,MAX_PWD_LENGTH);
   
  memcpy(pinOld,cmd->params.ptr_set_plus_cpin->pin,cmd->params.ptr_set_plus_cpin->c_pin);
  if(cmd->params.ptr_set_plus_cpin->v_newpin)
  {
    memcpy(pinNew,cmd->params.ptr_set_plus_cpin->newpin,cmd->params.ptr_set_plus_cpin->c_newpin);
  }
  else
  {
    p_pinNew = NULL;
  }
  #ifdef SIM_PERS
  slockBlocked = AciSLockShrd.blocked;
  #endif
  ret = (T_ACI_BAT_RSLT)sAT_PlusCPIN ((T_ACI_CMD_SRC)src_infos_psi->srcId,pinOld,p_pinNew);

  switch((T_ACI_RETURN)ret)
  {
    case(AT_EXCT):
    case (AT_FAIL):
    {
      break;
    }
    case(AT_BUSY):
    {
      ACI_ERR_DESC(ACI_ERR_CLASS_Cme, CME_ERR_SimBusy);
      break;
    }
    case(AT_CMPL):
    {
      if (!slockBlocked)
      {
        ACI_ERR_DESC(ACI_ERR_CLASS_Cme, CME_ERR_Unknown);
      }
      break;
    }
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCPIN        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCPIN        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_ACI_CPIN_RSLT code;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cpin que_cpin_buffer;
  
  TRACE_FUNCTION ("qBAT_PlusCPIN()");
  
  ret=(T_ACI_BAT_RSLT) qAT_PlusCPIN ((T_ACI_CMD_SRC)src_infos_psi->srcId,&code);  
  resp.ctrl_response = BAT_RES_QUE_PLUS_CPIN; /*PIN status is requested*/ 
  resp.response.ptr_que_plus_cpin = &que_cpin_buffer;
  
  switch ((T_ACI_RETURN)ret)
  {
    case(AT_CMPL):
    {
      resp.response.ptr_que_plus_cpin->code = (T_BAT_plus_cpin_code)code;
      aci_bat_send(src_infos_psi,&resp);
      break;
    }
    case(AT_EXCT):
    default :
    {
      break;
    }
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCPOL        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPOL        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_plus_cpol_format format = BAT_CPOL_FORMAT_NOT_PRESENT ;
  SHORT           index = (SHORT)BAT_PARAMETER_NOT_PRESENT;
  char            op[20] = {0};
  char* p_op;
  
  TRACE_FUNCTION ("sBAT_PlusCPOL()");
  
  p_op = op;
  
  index = cmd->params.ptr_set_plus_cpol->index;
  format = cmd->params.ptr_set_plus_cpol->format;
  if(cmd->params.ptr_set_plus_cpol->v_oper)
  {
    memcpy(op,cmd->params.ptr_set_plus_cpol->oper,cmd->params.ptr_set_plus_cpol->c_oper);
  }
  else
  {
    p_op = NULL;
  }  
 
  ret=(T_ACI_BAT_RSLT)sAT_PlusCPOL((T_ACI_CMD_SRC)src_infos_psi->srcId,index,(T_ACI_CPOL_FRMT)format,p_op,
                   (SHORT)BAT_PARAMETER_NOT_PRESENT,CPOL_MOD_NotPresent);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PlusCPOL        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PlusCPOL        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  SHORT           lastIdx=0,usdNtry=0;
  T_BAT_cmd_response resp;
  T_BAT_res_tst_plus_cpol tst_cpol_buffer;
  
  TRACE_FUNCTION ("tBAT_PlusCPOL()");
  resp.ctrl_response = BAT_RES_TST_PLUS_CPOL;
  resp.response.ptr_tst_plus_cpol = &tst_cpol_buffer;  

  ret =(T_ACI_BAT_RSLT) tAT_PlusCPOL((T_ACI_CMD_SRC)src_infos_psi->srcId,&lastIdx,&usdNtry);
  if (ret EQ ((T_ACI_BAT_RSLT)AT_CMPL))
  {
    resp.response.ptr_tst_plus_cpol->index1 = 1;
    resp.response.ptr_tst_plus_cpol->index2 = lastIdx;
    aci_bat_send(src_infos_psi,&resp);
  }
  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCPOL        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCPOL        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  //T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_ACI_CPOL_LST  plmnSelLst;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cpol que_cpol_buffer;  
  SHORT           startIdx=0,lastIdx=0;
  UBYTE           idx;
  BOOL            loop;
  
  TRACE_FUNCTION ("qBAT_PlusCPOL()");
  resp.ctrl_response = BAT_RES_QUE_PLUS_CPOL;
  resp.response.ptr_que_plus_cpol = &que_cpol_buffer;

  switch (qAT_PlusCPOL ((T_ACI_CMD_SRC) src_infos_psi->srcId,1, &lastIdx,&plmnSelLst[0],CPOL_MOD_NotPresent))
  {
    case AT_CMPL:
    {
      loop = TRUE;
      do
      {
        if( lastIdx EQ (SHORT)BAT_PARAMETER_NOT_PRESENT )
        {
          break;
        }
        startIdx = lastIdx+1;

        for( idx=0; idx < MAX_OPER; idx++ )
        {
          if( plmnSelLst[idx].index EQ (SHORT)BAT_PARAMETER_NOT_PRESENT )
          {
            loop = FALSE;
            break;
          }
          resp.response.ptr_que_plus_cpol->format = (T_BAT_plus_cpol_format)plmnSelLst[idx].format;
          resp.response.ptr_que_plus_cpol->index = (U8)plmnSelLst[idx].index;
          resp.response.ptr_que_plus_cpol->c_oper = strlen(plmnSelLst[idx].oper);
          memcpy(resp.response.ptr_que_plus_cpol->oper,plmnSelLst[idx].oper,strlen(plmnSelLst[idx].oper));
          aci_bat_send(src_infos_psi,&resp);
        }

        if( qAT_PlusCPOL((T_ACI_CMD_SRC)src_infos_psi->srcId, startIdx, &lastIdx, &plmnSelLst[0],
                         CPOL_MOD_NotPresent) EQ AT_FAIL OR !loop)
        {
          break;
        }
      }
      while( loop );
      return ACI_BAT_CMPL;
    }

    case AT_EXCT:
    {
      return ACI_BAT_EXCT;
    }  

    default:
    {
      return ACI_BAT_FAIL;
    }
  }  
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCNUM        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCNUM        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PlusCNUM()");

  if(qAT_PlusCNUM ((T_ACI_CMD_SRC) src_infos_psi->srcId, CNUM_MOD_NewRead) EQ AT_EXCT)
  {
    return ACI_BAT_EXCT;
  }
  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCFUN        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCFUN        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_plus_cfun_fun  fun = BAT_CFUN_FUN_NOT_PRESENT;
  T_BAT_plus_cfun_rst rst = BAT_CFUN_RST_NOT_PRESENT;
    
  TRACE_FUNCTION ("sBAT_PlusCFUN()");

  /*
  *   This relies on T_BAT_VAL_plus_cfun_fun being identical to 
  *   T_ACI_CFUN_FUN and T_BAT_VAL_plus_cfun_rst being identical
  *   to T_ACI_CFUN_RST. At the time of writing, they are.
  */
  fun=cmd->params.ptr_set_plus_cfun->fun;
  rst=cmd->params.ptr_set_plus_cfun->rst;

  /*
  *   Call the corresponding sAT function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PlusCFUN((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_CFUN_FUN)fun,(T_ACI_CFUN_RST)rst);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCFUN        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCFUN (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_ACI_CFUN_FUN fun;

  TRACE_FUNCTION ("qBAT_PlusCFUN()");

  /*
  *   Call the corresponding sAT function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PlusCFUN((T_ACI_CMD_SRC)src_infos_psi->srcId,&fun);

  /*
  *   If the query completes, we must send a response.
  */
  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_plus_cfun cfun_data;

    resp.ctrl_response=BAT_RES_QUE_PLUS_CFUN;
    resp.response.ptr_que_plus_cfun=&cfun_data;

    /*
    *   This relies on T_BAT_plus_cfun_fun being identical to 
    *   T_ACI_CFUN_FUN.
    */
    cfun_data.fun=(T_BAT_plus_cfun_fun)fun;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCIMI        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIMI        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  CHAR imsi[MAX_IMSI_LEN+1];
  T_BAT_cmd_response resp;
  T_BAT_res_set_plus_cimi set_cimi_buffer;
  
  TRACE_FUNCTION ("sBAT_PlusCIMI()");

  resp.ctrl_response = BAT_RES_SET_PLUS_CIMI ;
  resp.response.ptr_set_plus_cimi = &set_cimi_buffer;
    
  ret =(T_ACI_BAT_RSLT) qAT_PlusCIMI((T_ACI_CMD_SRC)src_infos_psi->srcId, imsi);
  if (ret EQ ACI_BAT_CMPL)
  {
    resp.response.ptr_set_plus_cimi->c_imsi = strlen(imsi);
    memcpy(resp.response.ptr_set_plus_cimi->imsi,imsi,resp.response.ptr_set_plus_cimi->c_imsi);
    aci_bat_send(src_infos_psi,&resp);
  }
  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCRSM        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCRSM        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_plus_crsm_command command;
  UBYTE           *data;
  SHORT            fileId     = (SHORT)BAT_PARAMETER_NOT_PRESENT,
                   p1         = (SHORT)BAT_PARAMETER_NOT_PRESENT,
                   p2         = (SHORT)BAT_PARAMETER_NOT_PRESENT,
                   p3         = (SHORT)BAT_PARAMETER_NOT_PRESENT;
    
  TRACE_FUNCTION ("sBAT_PlusCRSM()");
  
  command = cmd->params.ptr_set_plus_crsm->command;
  if(cmd->params.ptr_set_plus_crsm->fileid NEQ (S32)BAT_PARAMETER_NOT_PRESENT)
  {
    fileId = (SHORT)cmd->params.ptr_set_plus_crsm->fileid;
  }
  p1 = cmd->params.ptr_set_plus_crsm->p1;
  p2 = cmd->params.ptr_set_plus_crsm->p2;
  p3 = cmd->params.ptr_set_plus_crsm->p3;
  data = cmd->params.ptr_set_plus_crsm->data;

  ret=(T_ACI_BAT_RSLT)sAT_PlusCRSM(
    (T_ACI_CMD_SRC)src_infos_psi->srcId,
    (T_ACI_CRSM_CMD)command,
    fileId,
    p1,p2,p3,
    (SHORT)cmd->params.ptr_set_plus_crsm->c_data,
    data);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCSIM        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCSIM        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  UBYTE           *data;
  USHORT           lenData    = 0;
    
  TRACE_FUNCTION ("sBAT_PlusCSIM()");
  
  data = cmd->params.ptr_set_plus_csim->command;
  lenData=(USHORT)cmd->params.ptr_set_plus_csim->c_command;
  
  if (lenData EQ 0)
    return ACI_BAT_FAIL;

  ret =(T_ACI_BAT_RSLT) sAT_PlusCSIM((T_ACI_CMD_SRC) src_infos_psi->srcId, lenData, data );

  return ret;
}

#ifdef TI_PS_FF_AT_P_CMD_ATR
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentATR      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentATR      (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  UBYTE phase;
  UBYTE atr_len;
  UBYTE atr_info[MAX_SIM_ATR];
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_atr que_atr_buffer;
  
  TRACE_FUNCTION ("qBAT_PercentATR()");
  resp.ctrl_response = BAT_RES_QUE_PERCENT_ATR ;
  resp.response.ptr_que_percent_atr = &que_atr_buffer;

  ret =(T_ACI_BAT_RSLT) qAT_PercentATR((T_ACI_CMD_SRC) src_infos_psi->srcId, &phase, &atr_len, atr_info );
  if(ret EQ ACI_BAT_CMPL)
  {
    resp.response.ptr_que_percent_atr->phase = (T_BAT_percent_atr_phase)phase ;
    resp.response.ptr_que_percent_atr->c_atr = atr_len;
    memcpy(resp.response.ptr_que_percent_atr->atr,atr_info,resp.response.ptr_que_percent_atr->c_atr);
    aci_bat_send(src_infos_psi,&resp);
  }
  return(ret);
}
#endif /* TI_PS_FF_AT_P_CMD_ATR */  

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentPVRF     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentPVRF     (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  CHAR            pin[10];
  CHAR            newpin[10];
  CHAR*           p_newpin;
  
  TRACE_FUNCTION ("sBAT_PercentPVRF()");

  p_newpin = newpin;
  memset(pin,0,sizeof(pin));
  
  if (cmd->params.ptr_set_percent_pvrf->type <= BAT_P_PVRF_TYPE_PUK2)/*lint !e685 (Warning : always evaluates to false)*/
  {
    
    memcpy(pin,cmd->params.ptr_set_percent_pvrf->pin,cmd->params.ptr_set_percent_pvrf->c_pin);
    if(cmd->params.ptr_set_percent_pvrf->v_newpin)
    {
      memcpy(newpin,cmd->params.ptr_set_percent_pvrf->newpin,cmd->params.ptr_set_percent_pvrf->c_newpin);
    }
    else
    {
      p_newpin = NULL;
    }
    ret =(T_ACI_BAT_RSLT) sAT_PercentPVRF ((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_PVRF_TYPE)cmd->params.ptr_set_percent_pvrf->type, pin, p_newpin);
    return(ret);
  }
  else
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow);
    return (ACI_BAT_FAIL);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentPVRF     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentPVRF     (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_pvrf que_pvrf_buffer;
  SHORT           pn2cnt = 0;
  SHORT           pk1cnt = 0;
  SHORT           pk2cnt = 0;
  T_BAT_percent_pvrf_ps1 ps1 = BAT_P_PVRF_PS1_NOT_PRESENT ;
  T_BAT_percent_pvrf_ps2 ps2 = BAT_P_PVRF_PS2_NOT_PRESENT ;
  
  TRACE_FUNCTION ("qBAT_PercentPVRF()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_PVRF ; 
  resp.response.ptr_que_percent_pvrf = &que_pvrf_buffer;
  
  resp.response.ptr_que_percent_pvrf->pn2cnt = pn2cnt;
  resp.response.ptr_que_percent_pvrf->pk1cnt = pk1cnt;
  resp.response.ptr_que_percent_pvrf->pk2cnt = pk2cnt;
  resp.response.ptr_que_percent_pvrf->ps1 = ps1;
  resp.response.ptr_que_percent_pvrf->ps2 = ps2;

  aci_bat_send(src_infos_psi,&resp);
  return (ACI_BAT_CMPL);
 }

#ifdef TI_PS_FF_AT_P_CMD_CUST
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCUST     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCUST     (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{    
  TRACE_FUNCTION ("sBAT_PercentCUST()");
  
  switch(cmd->params.ptr_set_percent_cust->mode)
  {
    case(BAT_P_CUST_MODE_NORMAL):
    case(BAT_P_CUST_MODE_BEHAVIOUR_1):
    {
      if (sAT_PercentCUST((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_CUST_MOD)(cmd->params.ptr_set_percent_cust->mode)) EQ AT_FAIL)
      {
        return (ACI_BAT_FAIL);
      }
      break;
    }
    default:
    {
      ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
      return (ACI_BAT_FAIL);
    }  
  }
  return ACI_BAT_CMPL;
  }

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCUST     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCUST     (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_percent_cust_mode   mode;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cust que_cust_buffer;
    
  TRACE_FUNCTION ("qBAT_PercentCUST()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_CUST; 
  resp.response.ptr_que_percent_cust = &que_cust_buffer;
  
  ret = (T_ACI_BAT_RSLT)qAT_PercentCUST((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_CUST_MOD *)&mode);
  if (ret NEQ ACI_BAT_CMPL)
  {
    return (ACI_BAT_FAIL);
  }
  resp.response.ptr_que_percent_cust->mode = mode;
  aci_bat_send(src_infos_psi,&resp);
  return(ret);
}
#endif /* TI_PS_FF_AT_P_CMD_CUST */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentSATCC    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentSATCC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                         T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
    
  TRACE_FUNCTION ("sBAT_PercentSATCC()");

  ret = (T_ACI_BAT_RSLT)sAT_PercentSATCC((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_SAT_CC_MOD)cmd->params.ptr_set_percent_satcc->mode);

  return ret;
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentSATCC    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentSATCC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                         T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT              ret = ACI_BAT_FAIL;
  T_BAT_percent_satcc_mode    mode;
  T_BAT_cmd_response          resp;
  T_BAT_res_que_percent_satcc que_satcc_buffer;

  TRACE_FUNCTION ("qBAT_PercentSATCC()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_SATCC;

  resp.response.ptr_que_percent_satcc = &que_satcc_buffer;
  
  ret = (T_ACI_BAT_RSLT)qAT_PercentSATCC((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_SAT_CC_MOD *)&mode);

  if(ret EQ ACI_BAT_CMPL)
  {
    resp.response.ptr_que_percent_satcc->mode = mode;
    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusEFRSLT      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentEFRSLT   (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_EFRSLT_RES result;
  T_ACI_BAT_RSLT ret;
    
  TRACE_FUNCTION ("sBAT_PercentEFRSLT()");

  /*
  *   This relies on T_BAT_percent_efrslt_result being identical to 
  *   T_ACI_EFRSLT_RES.
  */
  result=(T_ACI_EFRSLT_RES)cmd->params.ptr_set_percent_efrslt->result;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentEFRSLT((T_ACI_CMD_SRC)src_infos_psi->srcId,result);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentSIMEF      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentSIMEF   (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  T_ACI_SIMEF_MODE mode;
  T_ACI_BAT_RSLT ret;
    
  TRACE_FUNCTION ("sBAT_PercentSIMEF()");

  /*
  *   This relies on T_BAT_percent_simef_mode being identical to 
  *   T_ACI_SIMEF_MODE.
  */
  mode=(T_ACI_SIMEF_MODE)cmd->params.ptr_set_percent_simef->mode;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentSIMEF((T_ACI_CMD_SRC)src_infos_psi->srcId,mode);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentSIMEF    |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentSIMEF (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                         T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT              ret = ACI_BAT_FAIL;
  T_BAT_percent_simef_mode    mode;
  T_BAT_cmd_response          resp;
  T_BAT_res_que_percent_simef que_simef_buffer;

  TRACE_FUNCTION ("qBAT_PercentSIMEF()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_SIMEF;

  resp.response.ptr_res_que_percent_simef = &que_simef_buffer;
  
  ret = (T_ACI_BAT_RSLT)qAT_PercentSIMEF((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_SIMEF_MODE *)&mode);

  if(ret EQ ACI_BAT_CMPL)
  {
    resp.response.ptr_res_que_percent_simef->mode = mode;
    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}