FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aoc.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 13 Nov 2021 03:20:57 +0000 |
| parents | fa8dc04885d8 |
| children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : AOC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for advice of charge +----------------------------------------------------------------------------- */ #ifndef AOC_H #define AOC_H /* * States of Module */ #define AOC_NULL 0 #define AOC_DISABLE 1 #define AOC_ENABLE 2 /* * Info Causes */ #define AOC_START_TIME 1 #define AOC_STOP_TIME 2 #define AOC_START_AOC 3 #define AOC_SUSPEND_AOC 4 #define AOC_RESUME_AOC 5 #define AOC_CALL_CONNECTED 6 /* * Request Types */ #define AOC_CTV 0 #define AOC_CCM 1 #define AOC_ACM 2 #define AOC_ACMMAX 3 #define AOC_PUCT 4 #define AOC_CCM_PUCT 5 #define AOC_ACM_PUCT 6 #define AOC_ACMMAX_PUCT 7 #define AOC_PUCT_RAW 8 /* * Status of update operation */ #define FIRST_UPDATE 0 #define SECOND_UPDATE 1 #define VERIFY_PWD 2 /* * maximum remaining call time in milliseconds */ #define AOC_MAX_REMAIN_CALL_TIME 30000L #define AOC_THOUSAND_MILLISECONDS 1000L /* * indicates the processing mode for calculating remaining call time */ #define AOC_AOC_TIMER_ELAPSED 0 #define AOC_CALL_TIMER_ELAPSED 1 /* * Structure for requesting PUCT Values */ typedef struct { UBYTE currency [4]; UBYTE value [20]; } T_puct; typedef struct { UBYTE currency [4]; ULONG eppu; ULONG exp; ULONG sexp; } T_puct_raw; /* * e_bitmap parameter */ #define E1_CHANGED 1 #define E2_CHANGED 2 #define E3_CHANGED 4 #define E4_CHANGED 8 #define E7_CHANGED 64 typedef struct { USHORT e1; /* e1 parameter */ USHORT e2; /* e2 parameter */ USHORT e3; /* e3 parameter */ USHORT e4; /* e4 parameter */ /* will be cleared after charged */ USHORT e5; /* e5 parameter */ USHORT e6; /* e6 parameter */ USHORT e7; /* e7 parameter */ /* will be cleared when reached */ UBYTE e_next_bitmap; /* validity of e-parameter */ USHORT e1_next; /* e1 parameter in abeyance*/ USHORT e2_next; /* e2 parameter in abeyance*/ USHORT e3_next; /* e3 parameter in abeyance*/ /* See AOC08226 !!! */ USHORT e7_next; /* e7 parameter in abeyance*/ ULONG first_unit; /* ccm increment first unit*/ ULONG next_unit; /* ccm increment next unit */ T_TIME first_interval; /* time first interval */ T_TIME next_interval; /* time next interval */ T_TIME remaining_time; /* remaining time for timer*/ UBYTE aoc_timer_running;/* timer is running ? */ UBYTE new_data_avail; /* E-Parameter have changed*/ T_TIME time_ut_charge; /* time in sec until next */ /* charging occur */ UBYTE aoci_active; /* indicate charge only */ } T_CC_AOC_TBL; EXTERN UBYTE aoc_init (UBYTE phase, UBYTE *sim_service_table); EXTERN void aoc_reset (void); EXTERN void aoc_sms (void); EXTERN UBYTE aoc_info (SHORT Cid, UBYTE cause); EXTERN void aoc_get_values (UBYTE value_type, void * value); EXTERN T_ACI_RETURN aoc_set_values (T_ACI_CMD_SRC srcId, UBYTE value_type, void * value, UBYTE * password); EXTERN UBYTE aoc_check_moc (void); EXTERN void aoc_parameter (SHORT Cid, T_FWD_CHG_ADVICE_INV * aoc_para); EXTERN void aoc_send_ccm (void); EXTERN UBYTE aoc_ssc (UBYTE nr, UBYTE * serv_table); EXTERN void aoc_read_acm_cb (SHORT table_id); EXTERN void aoc_read_acmmax_cb (SHORT table_id); EXTERN void aoc_read_puct_cb (SHORT table_id); EXTERN void aoc_init_calltable (void); EXTERN UBYTE aoc_timeout (USHORT handle); EXTERN void aoc_timeout_call_timer (void); EXTERN void aoc_timeout_aoc_timer (SHORT Cid); EXTERN UBYTE aoc_non_zero_cai (SHORT Cid); EXTERN UBYTE aoc_check_acm (void); EXTERN void aoc_calculate_charging_parameter (SHORT Cid); EXTERN void aoc_increment_initial_charge (SHORT Cid); EXTERN void aoc_increment_charge (ULONG increment, UBYTE ever); EXTERN void aoc_increment_cb (SHORT table_id); EXTERN void aoc_calculate_puct (ULONG value, T_puct * result); EXTERN void aoc_update_sim_datafield ( UBYTE operation, UBYTE accType, USHORT reqDataFld, void (*rplyCB)(SHORT)); EXTERN void aoc_update_puct (UBYTE operation, T_puct * value); EXTERN void aoc_update_acm_cb (SHORT table_id); EXTERN void aoc_update_acmmax_cb (SHORT table_id); EXTERN void aoc_update_puct_cb (SHORT table_id); EXTERN UBYTE aoc_set_puct_values (T_puct * puct); EXTERN USHORT aoc_getEVal ( void * eBuf ); #endif