view src/g23m-aci/aci/ati_cmd.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  J:\g23m-aci\aci\ati_cmd.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  
+----------------------------------------------------------------------------- 
*/ 
#ifndef ATI_CMD_H
#define ATI_CMD_H

/* copied from uart.h... should always be the same as there */
#ifdef FF_MULTI_PORT
#define UART_INSTANCES     FF_MULTI_PORT
#else /* FF_MULTI_PORT */
#ifdef FF_TWO_UART_PORTS
#define UART_INSTANCES                 2
#ifdef _SIMULATION_
# define UART_DATA_CHANNEL              3
#else
# define UART_DATA_CHANNEL              4
#endif
#else /* FF_TWO_UART_PORTS */
#define UART_INSTANCES                 1
#endif /* FF_TWO_UART_PORTS */
#endif /* FF_MULTI_PORT */

/*
 * SKA 2002-09-05 
 * when compiling for WIN32 allow ToDo message
 * e.g.: #pragma message( __TODO__"verbose message for engineering mode" )
 * appears during compiling as
 * Z:\g23m\condat\MS\SRC\ACI\ati_cmd.c(2560) : ToDo : verbose message for engineering mode
 */
#ifdef _SIMULATION_
#define __STR2__(x) #x
#define __STR1__(x) __STR2__(x)
#define __TODO__ __FILE__ "("__STR1__(__LINE__)") : ToDo : "
#else
#define __TODO__
#endif


typedef enum
{
    ATI_SRC_TYPE_UNKNOWN    = -1,
    ATI_SRC_TYPE_UART,
    ATI_SRC_TYPE_BLUETOOTH,
    ATI_SRC_TYPE_SAT,
    ATI_SRC_TYPE_IRDA,
    ATI_SRC_TYPE_LC,
    ATI_SRC_TYPE_TST,
    ATI_SRC_TYPE_RIV,
    ATI_SRC_TYPE_PSI
} T_ATI_SRC_TYPE;

typedef enum
{
  ATI_FAIL,
  ATI_FAIL_NO_OUTPUT,
  ATI_BUSY,
  ATI_EXCT,
  ATI_CMPL,
  ATI_CMPL_NO_OUTPUT
} T_ATI_RSLT;

#define ATI_OUTPUT_BASIC_FORMAT_START     1    /* BIT  3 - 0 */
#define ATI_OUTPUT_BASIC_TYPE_START       8    /* BIT  7 - 4 */
#define ATI_OUTPUT_ATTRIB_START         256    /* BIT 11 - 8 */
#define ATI_OUTPUT_RESPONSE_TYPES    0x1000    /* BIT 12, 13 */


typedef enum
{
  ATI_NO_OUTPUT = 0,
  ATI_BEGIN_CRLF_OUTPUT = (1 * ATI_OUTPUT_BASIC_FORMAT_START),
  ATI_END_CRLF_OUTPUT   = (2 * ATI_OUTPUT_BASIC_FORMAT_START),
  
  ATI_ECHO_OUTPUT       = (1 * ATI_OUTPUT_BASIC_TYPE_START), /* string without CR,LF              */
  ATI_NORMAL_OUTPUT     = (2 * ATI_OUTPUT_BASIC_TYPE_START), /* string ends with CR,LF            */
  ATI_CONFIRM_OUTPUT    = (4 * ATI_OUTPUT_BASIC_TYPE_START), /* string starts and ends with CR,LF */
  ATI_INDICATION_OUTPUT = (8 * ATI_OUTPUT_BASIC_TYPE_START), /* string ends with CR,LF            */

  ATI_FORCED_OUTPUT     = (1 * ATI_OUTPUT_ATTRIB_START), 
  ATI_ERROR_OUTPUT      = (2 * ATI_OUTPUT_ATTRIB_START),
  ATI_CONNECT_OUTPUT    = (4 * ATI_OUTPUT_ATTRIB_START),  /* buffer indications until back in CMD mode */

  /* the v25ter defines two types of responses */
  ATI_INFORMATION_TEXT_OUTPUT = (1 * ATI_OUTPUT_RESPONSE_TYPES),
  ATI_RESULT_CODE_OUTPUT      = (2 * ATI_OUTPUT_RESPONSE_TYPES)
} T_ATI_OUTPUT_TYPE;


/* send ATI output immediatly */
#define ATI_OUTPUT_TYPE_NORMAL  0 
/* buffer ATI output and send when confirm output received */
#define ATI_OUTPUT_TYPE_LARGE   1 

typedef enum
{
  ATI_LINE_STATE_UNKNOWN  = -1,
  ATI_LINE_STATE_DCD,
  ATI_LINE_STATE_RNG,
  ATI_LINE_STATE_OUTPUT_TYPE,    /* indication for output see above */
  ATI_LINE_STATE_START,
  ATI_LINE_STATE_END

} T_ATI_LINE_STATE_TYPE;


typedef enum
{
  ATI_UNKN_MODE = -1,
  ATI_CMD_MODE,
  ATI_DATA_MODE
} T_ATI_IO_MODE;

typedef enum
{
  CMD_IDLE  = 0,
  CMD_TYPING,
  CMD_RUNNING
} T_ATI_CMD_STATE;

typedef enum
{
  NO_BUFF  = 0,
  BUFF_TYPING,
  BUFF_RUNNING
} T_ATI_BUFF_UNS_MODE;
	
typedef struct
{
  CHAR              *output;
  T_ATI_OUTPUT_TYPE output_type;
} T_ATI_INDIC_BUFF;


typedef enum
{
  CMD_MODE = 0,
  TXT_MODE
} T_TEXT_MODE;

typedef struct
{
  char *key;                                    /* command key */
  T_ATI_RSLT (*fnc)     (char *, UBYTE srcId);  /* basic command handler */
  char *and_key;                                /* AND command key */
  T_ATI_RSLT (*and_fnc) ( char *, UBYTE srcId); /* and command handler */
} ATCommand_bas;

typedef struct
{
  CHAR *key;                       /* command key                    */
  T_ACI_AT_CMD binKey;             /* binary presentation of the cmd */
  T_ATI_RSLT (*sfnc) (char *, UBYTE srcId); /* set command handler   */
  T_ATI_RSLT (*tfnc) (char *, UBYTE srcId); /* test command handler  */
  T_ATI_RSLT (*qfnc) (char *, UBYTE srcId); /* query command handler */
  CHAR *output1;
} ATCommand;


typedef void T_ATI_RESULT_CB (UBYTE             src_id,
                              T_ATI_OUTPUT_TYPE	output_type,
                              UBYTE             *output,
                              USHORT            output_len);

typedef void T_ATI_LINE_STATE_CB (UBYTE                 src_id,
                                  T_ATI_LINE_STATE_TYPE	line_state_type,
                                  ULONG                 line_state_param);

typedef struct
{
  T_ATI_IO_MODE        mode;
  UBYTE                src_id;
  T_ATI_SRC_TYPE       src_type;
  T_ATI_RESULT_CB     *result_cb;
  T_ATI_LINE_STATE_CB *line_state_cb;
  T_ATI_CMD_STATE      cmd_state;
  T_ATI_BUFF_UNS_MODE  buff_uns_mode;
  void                *indication_buffer;
  T_TEXT_MODE          text_mode;
  T_ACI_AT_CMD         curAtCmd;
} T_ATI_SRC_PARAMS;

typedef enum
{
  ATI_EXT_PART_UNKNOWN = -1,
  ATI_EXT_PART_BEGIN,		/* beginning part of a complete line		*/
  ATI_EXT_PART_LINE,		    /* a middle part from a complete line		*/
  ATI_EXT_PART_LAST,		    /* the last part from a complete line	*/
  ATI_EXT_CMPL_LINE			 /* a complete line			*/
} T_ATI_EXT_FORMAT;

EXTERN BOOL search_ati_src_id (UBYTE src_id, void *elem);
EXTERN void init_ati (void);
EXTERN BOOL ati_is_src_type( UBYTE srcId, T_ATI_SRC_TYPE source_type );
/*
 *
 * AT-Command interpreter interface functions
 *
 */

EXTERN UBYTE ati_init (T_ATI_SRC_TYPE         src_type,
                       T_ATI_RESULT_CB			  *result_cb,
                       T_ATI_LINE_STATE_CB    *line_state_cb);

EXTERN void ati_finit (UBYTE src_id);

EXTERN T_ATI_RSLT ati_execute (UBYTE src_id, UBYTE *chars, USHORT len);

EXTERN BOOL ati_execute_config_cmd (UBYTE *chars, USHORT len);

EXTERN BOOL ati_abort (UBYTE src_id);

EXTERN T_ATI_RSLT map_aci_2_ati_rslt (T_ACI_RETURN rslt);
EXTERN void trace_run_cmd_line (char *prefix, UBYTE src_id, char *cmd_name, char *cmd_params);

EXTERN T_ACI_AT_CMD get_command_id (CHAR *command_str);
EXTERN T_ATI_RSLT sEXT_Output (UBYTE	src_id, T_ATI_EXT_FORMAT output_format,	CHAR	*output);
EXTERN T_ATI_RSLT sEXT_Indication (UBYTE src_id, CHAR *indication_string);
EXTERN T_ATI_RSLT sEXT_Error	(UBYTE src_id, T_ACI_CME_ERR err);
EXTERN T_ATI_RSLT sEXT_Confirm (UBYTE src_id);
EXTERN T_ATI_RSLT sEXT_Init (CHAR *cmd_list[]);
EXTERN T_ATI_RSLT sEXT_Finit ();



#if defined (SMS_PDU_SUPPORT)
EXTERN T_ATI_RSLT   atPlusCMGSPdu ( char            * cl, UBYTE srcId);
EXTERN T_ATI_RSLT   atPlusCMGWPdu ( char            * cl, UBYTE srcId);
EXTERN T_ATI_RSLT   atPlusCMGCPdu ( char            * cl, UBYTE srcId);
EXTERN T_ATI_RSLT   atPlusCNMAPdu ( char            * cl, UBYTE srcId);
#endif
#endif /* ATI_CMD_H */