view src/g23m-aci/aci/ati_omcompat.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
 * This module implements those AT commands that were originally invented
 * by Openmoko and have been retained in FreeCalypso.
 */

#ifndef ATI_OMCOMPAT_C
#define ATI_OMCOMPAT_C

#include "aci_all.h"

#include <ctype.h>
#include <string.h>

#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "aci_io.h"
#include "aci_cmd.h"
#include "l4_tim.h"
#include "line_edit.h"
#include "aci_lst.h"

#include "pcm.h"
#include "audio.h"
#include "aci.h"
#include "rx.h"
#include "pwr.h"
#include "l4_tim.h"

#ifdef GPRS
#ifdef DTI
#include "dti.h"
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#endif /* DTI */
#include "gaci.h"
#include "gaci_cmh.h"
#include "gaci_cmd.h"
#endif  /* GPRS */

#include "aci_mem.h"
#include "aci_prs.h"

#include "ati_int.h"

#ifndef _SIMULATION_
#include "ffs/ffs.h"
#endif

#ifdef FF_ATI_BAT

#include "typedefs.h"
#include "gdd.h"
#include "bat.h"

#include "ati_bat.h"

#endif /*FF_ATI_BAT*/

#include "audio/audio_api.h"
#include "abb.h"
#include "dar/dar_api.h"

EXTERN void alr_get_band_of_serving_cell (char *strbuf);

/*
 * PURPOSE : @ST command (Configure the sidetone level)
 */
GLOBAL T_ATI_RSLT atAtST (char *cl, UBYTE srcId)
{
	char tmp[8]={0};
	INT8 gain = -26;
	TRACE_FUNCTION("atAtST()");

	/*
	 * input functionality
	 */
	cl = parse(cl,"s", (LONG)8, tmp);

	gain = atoi(tmp);

	if ( cl )
	{
		if ( gain == -23 || gain == -20 || gain == -17 || gain == -14 || gain == -11 || gain == -8 || gain == -5 || gain == -2 || gain == 1 || gain == -26 )
		{
			Side_Tone_Write(gain);
			return (ATI_CMPL);
		}
		else
		{
			cmdCmsError(CMS_ERR_OpNotAllowed);
			return (ATI_FAIL);
		}
	}
}

GLOBAL T_ATI_RSLT queatAtST (char *cl, UBYTE srcId)
{
	char *me="+ST: ";
	INT8 ST1;

	TRACE_FUNCTION("queatAtST()");

	ST1 = Side_Tone_Read();

	sprintf(g_sa,"%s%d",me,ST1);

	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	return (ATI_CMPL);
}

/*
 * PURPOSE : @POFF command (Power Off GSM Modem)
 */
 
GLOBAL T_ATI_RSLT atAtPOFF (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtPOFF");

	sprintf(g_sa,"%s","OK");
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	ABB_Power_Off();

	return (ATI_CMPL);
}

/*
 * PURPOSE : @RST command (Reset GSM Modem)
 */
 
GLOBAL T_ATI_RSLT atAtRST (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtRST");

	dar_reset_system();

	return (ATI_CMPL);
}

/*
 * PURPOSE : @BAND command (Get RF band)
 */

GLOBAL T_ATI_RSLT atAtBAND (char *cl, UBYTE srcId)
{
	TRACE_FUNCTION("atAtBAND");			
	alr_get_band_of_serving_cell(g_sa);
	io_sendMessage(srcId, g_sa, ATI_NORMAL_OUTPUT);

	return (ATI_CMPL);
}

#endif /* ATI_OMCOMPAT_C */