FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/ati_src_sat.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : ATI_SRC_SATC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : . +----------------------------------------------------------------------------- */ #ifdef SIM_TOOLKIT #ifndef ATI_SRC_SAT_C #define ATI_SRC_SAT_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #ifdef UART #include "dti.h" /* functionality of the dti library */ #endif #include "aci_lst.h" #include "ati_src_sat.h" #include "psa.h" #include "psa_cc.h" #include "psa_sat.h" #include "cmh.h" #include "aci_mem.h" #ifdef UART #include "dti_conn_mng.h" #include "psa_uart.h" #endif #include "ati_io.h" #include "ati_int.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ EXTERN T_ACI_LIST *ati_src_list; /*==== VARIABLES ==================================================*/ USHORT sat_out_buf_len = 0; UBYTE *sat_out_buf = NULL; UBYTE run_at_id = 0xFF; /* srce id of source where run at cmd is processed */ /*==== FUNCTIONS ==================================================*/ EXTERN USHORT format_output (UBYTE *src, USHORT src_len, UBYTE *dst, T_ATI_OUTPUT_TYPE output_type); /* +----------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : | | ROUTINE : sat_buffer_output | +----------------------------------------------------------------+ PURPOSE : Buffer messages for RUN AT. Send buffered messages with confirm respond later */ LOCAL void sat_buffer_output(T_ACI_SAT_TERM_RESP resp_data) { UBYTE *new_buf; UBYTE *old_buf; TRACE_FUNCTION("sat_buffer_output"); if ( sat_out_buf EQ NULL ) /* first message to buffer */ { ACI_MALLOC(sat_out_buf, resp_data.at_resp_count +1); } else { /* enlarge buffer */ old_buf = sat_out_buf; ACI_MALLOC(new_buf, sat_out_buf_len + resp_data.at_resp_count +1); memcpy(new_buf, sat_out_buf, sat_out_buf_len); sat_out_buf = new_buf; ACI_MFREE(old_buf); } /* add new message text to the end of the output buffer */ memcpy(sat_out_buf + sat_out_buf_len, resp_data.at_resp, resp_data.at_resp_count); sat_out_buf_len += resp_data.at_resp_count; sat_out_buf[sat_out_buf_len] = 0; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : | | ROUTINE :sat_send_buffered_output | +-------------------------------------------------------------------+ PURPOSE : for RUN AT : send buffered messages with confirm respond */ LOCAL void sat_send_buffered_output(T_ACI_SAT_TERM_RESP resp_data) { TRACE_FUNCTION("sat_send_buffered_output"); /* copy confirm respond to end of output buffer */ sat_buffer_output(resp_data); /* send buffered respond */ resp_data.at_resp = sat_out_buf; resp_data.at_resp_count = sat_out_buf_len; TRACE_EVENT_P2("Buffer (%d): %s", resp_data.at_resp_count, (char*) resp_data.at_resp); psaSAT_SendTrmResp( RSLT_PERF_SUCCESS, &resp_data ); /* free buffered output */ ACI_MFREE(sat_out_buf); sat_out_buf = NULL; sat_out_buf_len = 0; } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : | | ROUTINE : sat_src_result_cb | +-------------------------------------------------------------------+ PURPOSE : */ GLOBAL void sat_src_result_cb ( UBYTE src_id, T_ATI_OUTPUT_TYPE output_type, UBYTE *output, USHORT output_len) { UBYTE *formated_response; T_ACI_SAT_TERM_RESP resp_data; T_ATI_SRC_PARAMS *src_params; // T_at_resp *at_response; psaSAT_InitTrmResp( &resp_data ); TRACE_FUNCTION("sat_src_result_cb()"); /* search for SAT source Id */ src_params = find_element (ati_src_list, src_id, search_ati_src_id); if (src_params EQ NULL) { TRACE_EVENT ("[ERR] source ID not found"); return; } else if( src_params->src_type NEQ ATI_SRC_TYPE_SAT) { TRACE_EVENT ("[ERR] source ID is not from type SAT"); return; } else if( !IS_INDICATION_OUTPUT(output_type) ) { /* size of response goes up to MAX_CMD_AT_LEN The rest will be truncated */ ACI_MALLOC(formated_response, MAX_CMD_AT_LEN+5); if( output_len > MAX_CMD_AT_LEN ) { output_len = MAX_CMD_AT_LEN; } resp_data.at_resp_count = format_output(output, output_len, formated_response, output_type); resp_data.at_resp = formated_response; if ( resp_data.at_resp NEQ NULL AND !IS_CONFIRM_OUTPUT(output_type)) { /* Buffer messages for RUN AT. Send buffered messages with confirm respond later */ TRACE_EVENT("buffer OUTPUT"); sat_buffer_output(resp_data); } else if ( resp_data.at_resp NEQ NULL AND sat_out_buf_len > 0 ) { /* for RUN AT: send buffered messages with confirm respond */ sat_send_buffered_output(resp_data); } else { /* send respond */ psaSAT_SendTrmResp( RSLT_PERF_SUCCESS, &resp_data ); } ACI_MFREE(formated_response); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : | | ROUTINE : sat_new_source | +-------------------------------------------------------------------+ PURPOSE : Create a new source for ATI with the corresponding struct. */ GLOBAL void sat_new_source( void ) { /*#ifdef _SIMULATION_ static BOOL already_done = FALSE; static UBYTE id; TRACE_FUNCTION("sat_new_source: Win 32"); if( already_done ) { TRACE_EVENT_P1("SAT related id: %d", id); satShrdPrm.run_at_id = id; return; } already_done = TRUE; #else UBYTE id; TRACE_FUNCTION("sat_new_source: target"); #endif*/ /* _SIMULATION_ */ run_at_id = ati_init(ATI_SRC_TYPE_SAT, sat_src_result_cb, NULL); if (run_at_id<CMD_SRC_MAX) { if (run_at_id==CMD_SRC_LCL) aci_cmd_src_mode_set(run_at_id,CMD_MODE_ACI); else aci_cmd_src_mode_set(run_at_id,CMD_MODE_ATI); } TRACE_EVENT_P1 ("sat_new_source: SAT srcId=%d", run_at_id); } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_DTIR | | ROUTINE : sat_src_proc_chars | +-------------------------------------------------------------------+ PURPOSE : */ GLOBAL BOOL sat_src_proc_chars ( UBYTE *chars ) { T_ATI_SRC_PARAMS *src_params = NULL; T_ACI_SAT_TERM_RESP resp_data; psaSAT_InitTrmResp( &resp_data ); TRACE_FUNCTION ("sat_src_proc_chars()"); /* search for SAT source Id */ src_params = find_element (ati_src_list, run_at_id, search_ati_src_id); if (src_params EQ NULL) { TRACE_EVENT ("[ERR] ati_execute: no SAT source ID present"); psaSAT_SendTrmResp( RSLT_ME_UNAB_PROC, &resp_data ); return(FALSE); } /* do not echo AT-cmds which are sent by SAT */ ati_user_output_cfg[src_params->src_id].atE = 0; return(ati_execute_sat_cmd (src_params, chars, MAX_CMD_AT_LEN)); } #endif /* SIM_TOOLKIT */