view src/g23m-aci/aci/cmh_phbt.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_PHBT
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the test functions related to the 
|             protocol stack adapter for the phonebook management.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_PHBT_C
#define CMH_PHBT_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "psa.h"
#include "phb.h"
#include "cmh.h"
#include "cmh_phb.h"

/*==== CONSTANTS ==================================================*/

#define PHB_CMH_FIRST_IDX   (1)  /* first index in phonebook */

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_PHBT                 |
| STATE   : code                  ROUTINE : cmhPHB_get_phonebook_info|
+--------------------------------------------------------------------+

  PURPOSE : This function is used to get the basic adjustments of the
            current selected phonebook storage.

            <firstIdx>: first supported index 
            <lastIdx>:  last supported index
            <nlength>:  maximum length of phone number
            <tlength>:  maximum length of associated text
*/
LOCAL T_ACI_RETURN cmhPHB_get_phonebook_info( T_ACI_CMD_SRC srcId,
                                              SHORT*        firstIdx,
                                              SHORT*        lastIdx,
                                              UBYTE*        nlength,
                                              UBYTE*        tlength )
{
  T_PHB_CMD_PRM * pPHBCmdPrm; /* points to PHB command parameter */
  SHORT maxIdx;   /* maximum record index     */
  UBYTE numLen;   /* maximum num length       */
  UBYTE tagLen;   /* maximum tag length       */
  SHORT dmyUsed;  /* dummy variable, not used */
  SHORT dmyMaxExt;
  SHORT dmyUsedExt;
  #ifndef TI_PS_FFS_PHB
  UBYTE dmySrvc;  /* dummy variable, not used */
  SHORT dmyAvail; /* dummy variable, not used */
#endif

  TRACE_FUNCTION("cmhPHB_get_phonebook_info( )");

  /*
   *-----------------------------------------------------------------
   * check command source
   *-----------------------------------------------------------------
   */  
  if( ! cmh_IsVldCmdSrc (srcId) ) 
  { 
    return( AT_FAIL );
  }

  pPHBCmdPrm = &cmhPrm[srcId].phbCmdPrm;

  /*
   *-----------------------------------------------------------------
   * fill in parameter <firstIdx>, <lastIdx>, <nlength> and <tlength>
   *-----------------------------------------------------------------
   */  

  if ( pPHBCmdPrm -> cmhStor EQ PB_STOR_NotPresent )
  {
    *firstIdx = ACI_NumParmNotPresent;
    *lastIdx  = ACI_NumParmNotPresent;
    *nlength  = 0;
    *tlength  = 0;
    return(AT_CMPL);
  }

#ifdef TI_PS_FFS_PHB
  if (pb_read_sizes ((T_PHB_TYPE)pPHBCmdPrm -> phbStor,
                     &maxIdx, 
                     &dmyUsed,
                     &numLen,
                     &tagLen,
                     &dmyMaxExt,
                     &dmyUsedExt) NEQ PHB_OK)
#else
  numLen = 2 * PHB_PACKED_NUM_LEN;
  if ( pb_read_status ( pPHBCmdPrm -> phbStor,
                        &dmySrvc,
                        &maxIdx, 
                        &dmyUsed,
                        &tagLen,
                        &dmyAvail,
                        &dmyMaxExt,
                        &dmyUsedExt ) EQ PHB_FAIL )
#endif
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown );
    return( AT_FAIL );
  }

  *firstIdx = PHB_CMH_FIRST_IDX;
  *lastIdx  = maxIdx;
  *nlength  = numLen;
  *tlength  = tagLen; /* excluding null termination */

  return ( AT_CMPL );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_PHBT                 |
| STATE   : code                  ROUTINE : tAT_PlusCPBR             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CPBR=? 
            AT command which is responsible to test for all supported
            memory indices, the length of phone numbers and
            the length of texts associated with these numbers.

            <firstIdx>: first supported index 
            <lastIdx>:  last supported index
            <nlength>:  maximum length of phone number
            <tlength>:  maximum length of associated text
*/
GLOBAL T_ACI_RETURN tAT_PlusCPBR ( T_ACI_CMD_SRC srcId,
                                   SHORT*        firstIdx,
                                   SHORT*        lastIdx,
                                   UBYTE*        nlength,
                                   UBYTE*        tlength )
{
  TRACE_FUNCTION ("tAT_PlusCPBR ()");

  return(cmhPHB_get_phonebook_info(srcId, firstIdx, lastIdx, nlength, tlength));
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_PHBT                 |
| STATE   : code                  ROUTINE : tAT_PlusCPBF             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CPBF=? 
            AT command which is responsible to test for the length of
            phone numbers and the length of texts associated with
            these numbers.

            <nlength>:  maximum length of phone number
            <tlength>:  maximum length of associated text
*/
GLOBAL T_ACI_RETURN tAT_PlusCPBF ( T_ACI_CMD_SRC srcId,
                                   UBYTE*        nlength,
                                   UBYTE*        tlength )
{
  SHORT firstIdx; /* dummy variable, not used */
  SHORT lastIdx;  /* dummy variable, not used */
  
  TRACE_FUNCTION ("tAT_PlusCPBF ()");

  return(cmhPHB_get_phonebook_info(srcId, &firstIdx, &lastIdx, nlength, tlength));
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_PHBT                 |
| STATE   : code                  ROUTINE : tAT_PlusCPBW             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CPBW=? 
            AT command which is responsible to test for all supported
            memory indices, the length of phone numbers and
            the length of texts associated with these numbers.

            <firstIdx>: first supported index 
            <lastIdx>:  last supported index
            <nlength>:  maximum length of phone number
            <tlength>:  maximum length of associated text
*/
GLOBAL T_ACI_RETURN tAT_PlusCPBW ( T_ACI_CMD_SRC srcId,
                                   SHORT*        firstIdx,
                                   SHORT*        lastIdx,
                                   UBYTE*        nlength,
                                   UBYTE*        tlength )
{
  TRACE_FUNCTION ("tAT_PlusCPBW ()");

  return(cmhPHB_get_phonebook_info(srcId, firstIdx, lastIdx, nlength, tlength));
}

/*==== EOF ========================================================*/