view src/g23m-aci/aci/cmh_psif.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_PSIF
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the functions used by the command
|             handler for the PSI module.
+----------------------------------------------------------------------------- 
*/ 
#ifdef FF_PSI

#define CMH_PSIF_C

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "aci_lst.h"
#include "aci_io.h"


#ifdef DTI
#include "dti.h"      /* functionality of the dti library */
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"
#endif /* DTI */
#include "psa_psi.h"
#include "cmh_psi.h"

#include "aci_mem.h"
#ifdef FAX_AND_DATA
#include "psa.h"
#include "psa_l2r.h"
#endif /* FAX_AND_DATA */


GLOBAL T_ACI_LIST *psi_src_params = NULL;
GLOBAL T_ACI_LIST *psi_dcb_par = NULL;


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  :             |
| STATE   : code                        ROUTINE : cmhPSItest_srcId  |
+--------------------------------------------------------------------+

  PURPOSE : search function for source Id in the structure T_ACI_DTI_PRC_PSI.

*/

GLOBAL BOOL cmhPSItest_srcId( UBYTE srcId, void *elem)
{
  T_ACI_DTI_PRC_PSI *compared = (T_ACI_DTI_PRC_PSI *)elem;
  
  if (compared -> srcId EQ srcId )
  {
    return TRUE;
  }
  else
  {
    return FALSE;
  }
}

#ifdef DTI
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  :                    |
| STATE   : code                        ROUTINE : cmhPSI_lst_init    |
+--------------------------------------------------------------------+

  PURPOSE : initializing of src params list of PSI entity

*/
GLOBAL void cmhPSI_lst_init (void)
{
  TRACE_FUNCTION ("cmhPSI_lst_init()");
  psi_src_params = new_list ();

  if ( !psi_dcb_par )
    psi_dcb_par = new_list ();
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_LST            |
| STATE   : code                        ROUTINE : cmhPSItest_device |
+--------------------------------------------------------------------+

  PURPOSE : search function for device number in the structure T_ACI_DTI_PRC_PSI.
*/

GLOBAL BOOL cmhPSItest_device (U32 devId, void *elem)
{
  T_ACI_DTI_PRC_PSI *compared = (T_ACI_DTI_PRC_PSI *)elem;
  
  if (compared ->devId EQ devId )
  {
    return TRUE;
  }
  else
  {
    return FALSE;
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_PSI               |
|                                 ROUTINE : cmhPSI_getdata         |
+-------------------------------------------------------------------+

  PURPOSE : tell DTI that ACI is ready to receive more datas.
*/

GLOBAL void cmhPSI_getdata ( T_ACI_CMD_SRC srcId )
{
  TRACE_FUNCTION ("cmhPSI_getdata");
  psa_psi_DTI_getdata ( (UBYTE)srcId, DTI_ENTITY_PSI);

}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  :            |
| STATE   : code                        ROUTINE : cmhPSI_find_dlci  |
+--------------------------------------------------------------------+

  PURPOSE : returns element with corresponding dlci and device.
  
            If called dlci=UART_DLCI_NOT_MULTIPLEXED (UART entity 
            value for device not multiplexed) then function returns 
            element with corresponding device...

*/
GLOBAL T_ACI_DTI_PRC_PSI *cmhPSI_find_dlci (T_ACI_LIST *search_list, 
                                         U32 devId, UBYTE dlci)
{
  T_ACI_DTI_PRC_PSI *content = NULL;

  if (search_list EQ NULL)
    return NULL;
  
  do
  {
    content = psi_find_next_element (search_list, content, devId, 
                                 cmhPSItest_device);
    if (content EQ NULL)
      return NULL;

    if( dlci EQ UART_DLCI_NOT_MULTIPLEXED OR
        content->dlci EQ UART_DLCI_NOT_MULTIPLEXED OR 
        content->dlci EQ dlci)
      return content;
  }
  while (content NEQ NULL);

  return NULL;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)          MODULE  :                        |
| STATE   : code                    ROUTINE : cmhPSI_Line_State_Ind  |
+--------------------------------------------------------------------+

  PURPOSE : evaluates and processes  LINE STATE indications sent by PSI: 
            Escape Sequence Detection
            DTR_DTR Line drop

*/
GLOBAL void cmhPSI_Line_State_Ind (U32 devId, U16 line_state)
{
#ifdef DTI
  T_DTI_ENTITY_ID  peer_id;
  T_ACI_DTI_PRC_PSI *src_infos = NULL;
  T_DTI_ENTITY_ID  entity_list[] = {DTI_ENTITY_ACI};

  TRACE_FUNCTION("cmhPSI_Line_State_Ind()");


  psiShrdPrm.dtr_clearcall = FALSE;

  src_infos = cmhPSI_find_dlci (psi_src_params, devId, UART_DLCI_NOT_MULTIPLEXED);


  if (src_infos EQ NULL)
  {
    TRACE_EVENT("[ERR] Wrong dlci");
    return;
  }

  /* escape sequence detected */
  if ((line_state EQ LINE_STD_ESCD_IND) OR
     ((line_state EQ LINE_STD_DTR_LDR) AND
     ((psiShrdPrm.dtr_behaviour EQ DTR_BEHAVIOUR_CommandMode) OR
     (psiShrdPrm.dtr_behaviour EQ DTR_BEHAVIOUR_ClearCall)) ))
  {
    peer_id = dti_cntrl_get_peer( DTI_ENTITY_PSI, (UBYTE)(devId&DIO_DEVICE_MASK), UART_DLCI_NOT_MULTIPLEXED );

    if ( (psiShrdPrm.dtr_behaviour EQ DTR_BEHAVIOUR_ClearCall) AND
         (line_state EQ LINE_STD_DTR_LDR) AND
         (   (peer_id EQ DTI_ENTITY_TRA)
          OR (peer_id EQ DTI_ENTITY_L2R)
          /*OR (peer_id EQ DTI_ENTITY_T30) also changed in cmhUART_DetectedESC_DTR (cmh_uartr.c) by KJF */
          OR (peer_id EQ DTI_ENTITY_ACI)  /* even disconnect if we are currently in CMD-Mode */
          OR (peer_id EQ DTI_ENTITY_PPPS) /* also drop PPP sessions */
          OR (peer_id EQ DTI_ENTITY_PPPC)
          ) )

    {
      /* this is only for CSD (TRA, L2R, T30) */
      psiShrdPrm.dtr_clearcall = TRUE;
    }

#ifdef FAX_AND_DATA
    if (peer_id EQ DTI_ENTITY_L2R)
    {
      psaL2R_ESC ( src_infos->srcId );
    }
    else
#endif
    {
      dti_cntrl_est_dpath_indirect ( src_infos->srcId,
                                     entity_list,
                                     1,
                                     SPLIT,
                                     atiPSI_dti_cb,
                                     DTI_CPBLTY_CMD,
                                     DTI_CID_NOTPRESENT);
    }
  }

  /* DTR line of serial link drops */
  else if (line_state EQ LINE_STD_DTR_LDR)
  {
    if (psiShrdPrm.dtr_behaviour EQ DTR_BEHAVIOUR_Ignore)
    {
      TRACE_EVENT("DCE ignores DTR");
    }
    else
    {
      TRACE_EVENT("[ERR] Wrong dtr_behaviour value");
    }
  }

  else
  {
    TRACE_EVENT("[ERR] Wrong cause value in PSI_LINE_STATE_IND");
  }
#else
  TRACE_EVENT("[ERR] DTI DISABLED");
#endif /* DTI */
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_LST            |
| STATE   : code                        ROUTINE : cmhPSI_erase_elem_received_cmd  |
+--------------------------------------------------------------------+

  PURPOSE : erase an entry element from the psi_src_params list.

*/

GLOBAL void cmhPSI_erase_src_elem(UBYTE srcId)
{
  T_ACI_DTI_PRC_PSI *content;

  content = remove_element (psi_src_params, (UBYTE)srcId, cmhPSItest_srcId);
  ACI_MFREE (content);
}


/*
+--------------------------------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_URT                                    |
| STATE   : code                        ROUTINE : cmhPSI_translateBD_RATE_to_DIO4_BAUD  |
+--------------------------------------------------------------------------------------------+

  PURPOSE: 
*/

LOCAL UBYTE cmhPSI_translateBD_RATE_to_DIO4_BAUD    ( T_ACI_BD_RATE rate )
{

  switch ( rate )
  {
    case BD_RATE_AUTO:   return (UBYTE) DIO4_BAUD_AUTO;
    case BD_RATE_75:     return (UBYTE) DIO4_BAUD_75;
    case BD_RATE_150:    return (UBYTE) DIO4_BAUD_150;
    case BD_RATE_300:    return (UBYTE) DIO4_BAUD_300;
    case BD_RATE_600:    return (UBYTE) DIO4_BAUD_600;
    case BD_RATE_1200:   return (UBYTE) DIO4_BAUD_1200;
    case BD_RATE_2400:   return (UBYTE) DIO4_BAUD_2400;
    case BD_RATE_4800:   return (UBYTE) DIO4_BAUD_4800;
    case BD_RATE_7200:   return (UBYTE) DIO4_BAUD_7200;
    case BD_RATE_9600:   return (UBYTE) DIO4_BAUD_9600;
    case BD_RATE_14400:  return (UBYTE) DIO4_BAUD_14400;
    case BD_RATE_19200:  return (UBYTE) DIO4_BAUD_19200;
    case BD_RATE_28800:  return (UBYTE) DIO4_BAUD_28800;
    case BD_RATE_33900:  return (UBYTE) DIO4_BAUD_33900;
    case BD_RATE_38400:  return (UBYTE) DIO4_BAUD_38400;
    case BD_RATE_57600:  return (UBYTE) DIO4_BAUD_57600;
    case BD_RATE_115200: return (UBYTE) DIO4_BAUD_115200;
    case BD_RATE_203125: return (UBYTE) DIO4_BAUD_203125;
    case BD_RATE_406250: return (UBYTE) DIO4_BAUD_406250;
    case BD_RATE_812500: return (UBYTE) DIO4_BAUD_812500;
    default:             return (UBYTE) DIO4_BAUD_NOT_VALID; 
  }
}

/*
+-----------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                    |
| STATE   : code                        ROUTINE : cmhPSI_dcbParFindDevice    |
+-----------------------------------------------------------------------------+

  PURPOSE: Finding the device entry in the 'psi_dcb_par' table 

*/
LOCAL BOOL  cmhPSI_dcbParFindDevice (U32 criterium, void *elem)
{
  if ( criterium EQ  ((T_ACI_DEVICE_DCB_ENTRY *)elem)->devId )
    return TRUE;
  
  return FALSE;
}

/*
+-----------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                    |
| STATE   : code                        ROUTINE : cmhPSI_FindAll             |
+-----------------------------------------------------------------------------+

  PURPOSE: Find every entry 

*/
LOCAL BOOL  cmhPSI_FindAll (U32 criterium, void *elem)
{
  return TRUE;
}

/*
+-----------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)             MODULE  : CMH_PSI                       |
| STATE   : code                      ROUTINE : cmhPSI_getDefaultPSIParameter |
+-----------------------------------------------------------------------------+

  PURPOSE: copy default configuration parameter of serial, packet or 
           MUX device in dcb par structure (T_ACI_PSI_DCB_PAR)
*/
LOCAL void cmhPSI_getDefaultPSIParameter(U32 dio_driver_type, T_ACI_PSI_DCB_PAR *dcbPar)
{
  T_DIO_DCB_SER_MUX dcbPar1 = 
         {
            DIO_TYPE_SER_MUX,                    /*device_type*/
            DIO_SLEEP_NOT_CHAN,         /*sleep_mode*/
            (UBYTE)DIO4_BAUD_115200,            /*baudrate*/
            DIO_CF_8N1,                    /*char_frame*/
            (UBYTE)DIO_FLOW_RTS_CTS,        /*flow_control*/
            XON_DEFAULT,                    /*xon*/
            XOFF_DEFAULT,                  /*xoff*/
            ESC_CHAR_DEFAULT,        /*esc_char*/
            DIO_GUARD_PER_NOT_VALID, /*guard_per*/
            DIO_MODE_SER,                     /*device_mode*/
            (UBYTE)DIO_MUX_MODE_NOT_VALID,         /*mux_mode*/
         };     
 T_DIO_DCB_SER dcbPar2 = 
         {
            DIO_TYPE_SER,                        /*device_type*/
            DIO_SLEEP_NOT_CHAN,         /*sleep_mode*/
            (UBYTE)DIO4_BAUD_115200,            /*baudrate*/
            DIO_CF_8N1,                    /*char_frame*/
            (UBYTE)DIO_FLOW_RTS_CTS,        /*flow_control*/
            XON_DEFAULT,                    /*xon*/
            XOFF_DEFAULT,                  /*xoff*/
            ESC_CHAR_DEFAULT,        /*esc_char*/
            DIO_GUARD_PER_NOT_VALID, /*guard_per*/
         };   
 T_DIO_DCB_PKT dcbPar3 = 
         {
            DIO_TYPE_PKT,                    /*device_type*/
            DIO_SLEEP_NOT_CHAN,         /*sleep_mode*/
         }; 
      
    if (dio_driver_type EQ DIO_DATA_SER)
    {
      memcpy ((T_DIO_DCB_SER*)&dcbPar->dio_dcb_ser, &dcbPar2, sizeof (T_DIO_DCB_SER));
    }
    else if (dio_driver_type EQ DIO_DATA_MUX)
    {
      memcpy ((T_DIO_DCB_SER_MUX*)&dcbPar->dio_dcb_ser_mux, &dcbPar1, sizeof (T_DIO_DCB_SER_MUX));
    }
    else if (dio_driver_type EQ DIO_DATA_PKT)
    {
      memcpy ((T_DIO_DCB_PKT*)&dcbPar->dio_dcb_pkt, &dcbPar3, sizeof (T_DIO_DCB_PKT));
    }
}

/*
+----------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                         |
| STATE   : code                        ROUTINE : cmhPSI_AddDeviceToDcbParameter  |
+----------------------------------------------------------------------------------+

  PURPOSE: add DCB parameter for a new device 

*/
GLOBAL void cmhPSI_AddDeviceToDcbParameter( U32 devId,U32 dio_driver_type )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry;

  TRACE_FUNCTION("cmhPSI_AddDeviceToDcbParameter");

  /*
   *    try to find the device
   */
  device_entry = psi_find_element(psi_dcb_par, devId, cmhPSI_dcbParFindDevice);

  /*
   *    if the device is new add it to the list
   */
  if ( device_entry EQ NULL )
  {
    ACI_MALLOC (device_entry, sizeof (T_ACI_DEVICE_DCB_ENTRY));

    device_entry->devId = devId;
    /*
     *    Default values by adding a new device
     */
    cmhPSI_getDefaultPSIParameter(dio_driver_type, &(device_entry->dcbPar));

    insert_list (psi_dcb_par, device_entry);
  }
}

/*
+---------------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                              |
| STATE   : code                        ROUTINE : cmhPSI_RemoveDeviceFromDcbParameter  |
+---------------------------------------------------------------------------------------+

  PURPOSE: remove DCB parameter for a device from 'psi_dcb_par' table

*/
GLOBAL void cmhPSI_RemoveDeviceFromDcbParameter( U32 devId )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry;

  TRACE_FUNCTION("cmhPSI_RemoveDeviceFromDcbParameter()");

  /*
   *  Find the device and remove it.
   */
  device_entry = psi_remove_element(psi_dcb_par, devId, cmhPSI_dcbParFindDevice);

  if ( device_entry NEQ NULL )
  {
    ACI_MFREE ( device_entry );
  }
}

/*
+---------------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                              |
| STATE   : code                        ROUTINE : cmhPSI_CleanDcbParameterList  |
+---------------------------------------------------------------------------------------+

  PURPOSE: clean the 'psi_dcb_par' table 

*/
GLOBAL void cmhPSI_CleanDcbParameterList( void )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry;

  TRACE_FUNCTION("cmhPSI_CleanDcbParameterList ()");

  /*
   *  Find the device and remove it.
   */
  while ( NULL NEQ (device_entry = psi_remove_element(psi_dcb_par, 0, cmhPSI_FindAll)) )
  {
    ACI_MFREE ( device_entry );
  }
}

/*
+---------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                         |
| STATE   : code                        ROUTINE : cmhPSI_GetDcbParOverDevice  |
+---------------------------------------------------------------------------------+

  PURPOSE: returns the DCB parameter for this device

*/
GLOBAL T_ACI_DEVICE_DCB_ENTRY* cmhPSI_GetDcbParOverDevice( U32 devId )
{
  T_ACI_DEVICE_DCB_ENTRY  *device_entry;

  TRACE_FUNCTION("cmhPSI_GetDcbParOverDevice ()");

  /*
   *  return DCB parameter for device
   */
  device_entry = psi_find_element(psi_dcb_par, devId, cmhPSI_dcbParFindDevice);

  if ( device_entry EQ NULL )
  {
    TRACE_EVENT_P1("[ERR] cmhPSI_GetDcbParOverDevice: device=%d not found", devId) ;
    return NULL;
  }

  return device_entry;
}




/*
+---------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                         |
| STATE   : code                        ROUTINE : cmhPSI_GetDeviceParOverSrcID    |
+---------------------------------------------------------------------------------+

  PURPOSE: returns the DCB parameter for this source ID

*/
GLOBAL T_ACI_DEVICE_DCB_ENTRY* cmhPSI_GetDeviceParOverSrcID( UBYTE srcId )
{
  T_ACI_DEVICE_DCB_ENTRY  *device_entry;
  T_ACI_DTI_PRC_PSI       *cmd_struct;

  TRACE_FUNCTION("cmhPSI_GetDeviceParOverSrcID ()");

  if( !ati_is_src_type(srcId, ATI_SRC_TYPE_PSI) )
  {
    /* not a PSI source */
    return(NULL);
  }
  
  /*
   *  find the device connected to this source ID
   */
  cmd_struct = find_element (psi_src_params, srcId, cmhPSItest_srcId);
  
  if (cmd_struct EQ NULL)
  {
    TRACE_EVENT_P1("[ERR] cmhPSI_GetDeviceParOverSrcID: srcId=%d not found", srcId) ;
    return NULL;
  }    

  /*
   *  return DCB parameter for device
   */
  device_entry = psi_find_element(psi_dcb_par, cmd_struct->devId, cmhPSI_dcbParFindDevice);

  if ( device_entry EQ NULL )
  {
    TRACE_EVENT_P1("[ERR] cmhPSI_GetDeviceParOverSrcID: device=%d not found", cmd_struct->devId) ;
    return NULL;
  }

  return device_entry;
}

/*
+---------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                         |
| STATE   : code                        ROUTINE : cmhPSI_GetParityOverSrcID       |
+---------------------------------------------------------------------------------+

  PURPOSE: returns parity for this source ID
*/
GLOBAL UBYTE cmhPSI_GetParityOverSrcID( UBYTE srcId )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
  UBYTE parity=UART_IO_PA_UNDEF;
  U32 character_frame;
  U32 device_type;

  if ( device_entry EQ NULL )
  {
    return UART_IO_PA_NONE;
  }
  else 
  {
    device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
    if (device_type EQ DIO_DATA_SER)
    {
       character_frame = device_entry->dcbPar.dio_dcb_ser.char_frame;
    }
    else if (device_type EQ DIO_DATA_MUX)
    {
       character_frame = device_entry->dcbPar.dio_dcb_ser_mux.char_frame;
    }
    else /*if (device_type EQ DIO_DATA_PKT)*/
    {
        return(parity);
    }
     
     switch (character_frame)
     {
       case DIO_CF_8N2:
       case DIO_CF_8N1:
       case DIO_CF_7N2:
       case DIO_CF_7N1:
       default:
            parity = UART_IO_PA_NONE;
            break;
       case DIO_CF_8O1:
       case DIO_CF_7O1:
            parity = UART_IO_PA_ODD;
            break;
       case DIO_CF_8E1:
       case DIO_CF_7E1:
            parity = UART_IO_PA_EVEN;
            break;
       case DIO_CF_8S1:
       case DIO_CF_7S1:
       case DIO_CF_8M1:
       case DIO_CF_7M1:
            parity = UART_IO_PA_SPACE;
            break;
     }
  }
  return parity;  
}
/*
+---------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                         |
| STATE   : code                        ROUTINE : cmhPSI_GetDataBitOverSrcID      |
+---------------------------------------------------------------------------------+

  PURPOSE: returns data bits for this source ID
*/
GLOBAL UBYTE cmhPSI_GetDataBitOverSrcID( UBYTE srcId )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
  UBYTE data_bit =UART_IO_BPC_UNDEF;
  U32 character_frame;
  U32 device_type;

  if ( device_entry EQ NULL )
  {
    return UART_IO_BPC_8;
  }
 else 
  {
     device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
     if (device_type EQ DIO_DATA_SER)
     {
       character_frame = device_entry->dcbPar.dio_dcb_ser.char_frame;
     }
     else if (device_type EQ DIO_DATA_MUX)
     {
       character_frame = device_entry->dcbPar.dio_dcb_ser_mux.char_frame;
     }
     else /*if (device_type EQ DIO_DATA_PKT)*/
     {
        return(data_bit);
     }
     switch (character_frame)
     {
       case DIO_CF_8N2:
       case DIO_CF_8N1:
       case DIO_CF_8S1:
       case DIO_CF_8O1:
       case DIO_CF_8E1:
       case DIO_CF_8M1:
       default:
            data_bit = UART_IO_BPC_8;
            break;
       case DIO_CF_7N2:
       case DIO_CF_7N1:
       case DIO_CF_7O1:
       case DIO_CF_7E1:
       case DIO_CF_7S1:
       case DIO_CF_7M1:
            data_bit = UART_IO_BPC_7;
            break;
     }
  }
  return data_bit;  
}
/*
+---------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                         |
| STATE   : code                        ROUTINE : cmhPSI_GetStopBitOverSrcID      |
+---------------------------------------------------------------------------------+

  PURPOSE: returns stop bits for this source ID
*/
GLOBAL UBYTE cmhPSI_GetStopBitOverSrcID( UBYTE srcId )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
  UBYTE stop_bit=UART_IO_SB_UNDEF;
  U32 character_frame;
  U32 device_type;
  if ( device_entry EQ NULL )
  {
    return UART_IO_SB_1;
  }
 else 
  {
    device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
    if (device_type EQ DIO_DATA_SER)
    {
       character_frame = device_entry->dcbPar.dio_dcb_ser.char_frame;
    }
    else if (device_type EQ DIO_DATA_MUX)
    {
       character_frame = device_entry->dcbPar.dio_dcb_ser_mux.char_frame;
    }
    else /*if (device_type EQ DIO_DATA_PKT)*/
    {
        return(stop_bit);
    }
     switch (character_frame)
     {
       case DIO_CF_8N1:
       case DIO_CF_8S1:
       case DIO_CF_8O1:
       case DIO_CF_8E1:
       case DIO_CF_8M1:
       case DIO_CF_7N1:
       case DIO_CF_7O1:
       case DIO_CF_7E1:
       case DIO_CF_7S1:
       default:
            stop_bit = UART_IO_SB_1;
            break;
       case DIO_CF_8N2:
       case DIO_CF_7N2:
            stop_bit = UART_IO_SB_2;
            break;
     }
  }
  return stop_bit;  
}


/*
+------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                     |
| STATE   : code                        ROUTINE : cmhPSI_SetDcbParToUnchanged |
+------------------------------------------------------------------------------+

  PURPOSE: set the PSI DCB parameter to unchanged

*/
GLOBAL void cmhPSI_SetDcbParToUnchanged( T_ACI_DEVICE_DCB_ENTRY *dcbntry )
{
    U32 device_type;
    device_type = dcbntry->devId & DIO_TYPE_DAT_MASK;
    if (device_type EQ DIO_DATA_SER)
    {
       dcbntry->dcbPar.dio_dcb_ser.baudrate       = DIO4_BAUD_NOT_VALID;    /* baud rate                                */
       dcbntry->dcbPar.dio_dcb_ser.char_frame         = DIO_CF_NOT_VALID;      /* bits per character                       */
       dcbntry->dcbPar.dio_dcb_ser.flow_control     = DIO_FLOW_NOT_VALID;    /* flow control mode RX                     */

       dcbntry->dcbPar.dio_dcb_ser.xon         = XON_NOT_VALID;
       dcbntry->dcbPar.dio_dcb_ser.xoff        = XOFF_NOT_VALID;
       /*
       * Set escape parameters
       */
       dcbntry->dcbPar.dio_dcb_ser.esc_char    = ESC_CHAR_NOT_VALID;
       dcbntry->dcbPar.dio_dcb_ser.guard_period      = DIO_GUARD_PER_NOT_VALID;
    }
    else if (device_type EQ DIO_DATA_MUX)
    {
       dcbntry->dcbPar.dio_dcb_ser_mux.baudrate       = DIO4_BAUD_NOT_VALID;    /* baud rate                                */
       dcbntry->dcbPar.dio_dcb_ser_mux.char_frame         = DIO_CF_NOT_VALID;      /* bits per character                       */
       dcbntry->dcbPar.dio_dcb_ser_mux.flow_control     = DIO_FLOW_NOT_VALID;    /* flow control mode RX                     */

       dcbntry->dcbPar.dio_dcb_ser_mux.xon         = XON_NOT_VALID;
       dcbntry->dcbPar.dio_dcb_ser_mux.xoff        = XOFF_NOT_VALID;
       /*
       * Set escape parameters
       */
       dcbntry->dcbPar.dio_dcb_ser_mux.esc_char    = ESC_CHAR_NOT_VALID;
       dcbntry->dcbPar.dio_dcb_ser_mux.guard_period      = DIO_GUARD_PER_NOT_VALID;
    }
}

/*
+------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                     |
| STATE   : code                        ROUTINE : cmhPSI_SetDataRate          |
+------------------------------------------------------------------------------+

  PURPOSE: set the PSI data rate

*/
GLOBAL T_ACI_RETURN cmhPSI_SetDataRate ( UBYTE srcId, T_ACI_BD_RATE  rate)
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
  U32 device_type;

  if ( device_entry EQ NULL )
  {
    TRACE_EVENT_P1("[ERR] cmhPSI_SetDataRate: device for source ID = %d not found", srcId);
    return AT_FAIL;
  }
  device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
  cmhPSI_SetDcbParToUnchanged( device_entry );
  if (device_type EQ DIO_DATA_SER)
  {
    device_entry->dcbPar.dio_dcb_ser.baudrate = cmhPSI_translateBD_RATE_to_DIO4_BAUD( rate );
  }
  else if (device_type EQ DIO_DATA_MUX)
  {
    device_entry->dcbPar.dio_dcb_ser_mux.baudrate = cmhPSI_translateBD_RATE_to_DIO4_BAUD( rate );
  }
  else  /*if (device_type EQ DIO_DATA_PKT)*/
  {
    return AT_FAIL;
  }
  psaPSI_SetConfReq(device_entry);
  return AT_EXCT;
}

/*
+------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                     |
| STATE   : code                        ROUTINE : cmhPSI_SetCharacterFraming  |
+------------------------------------------------------------------------------+

  PURPOSE: set the PSI character framing

*/
GLOBAL T_ACI_RETURN cmhPSI_SetCharacterFraming ( UBYTE srcId, 
                                                  T_ACI_BS_FRM format, 
                                                  T_ACI_BS_PAR parity )
{
  T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
  U32 device_type;
  
  if ( device_entry EQ NULL )
  {
    TRACE_EVENT_P1("[ERR] cmhPSI_SetCharacterFraming: device for source ID = %d not found", srcId);
    return AT_FAIL;
  }
  device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
  cmhPSI_SetDcbParToUnchanged( device_entry );

  /*
   *  translate AT command parameter to PSI parameter
   */
 if (device_type EQ DIO_DATA_SER)
 {
  switch (format)
  {
     case BS_FRM_NotPresent:
        break;
     case BS_FRM_Dat8_Par0_St2:
        device_entry->dcbPar.dio_dcb_ser.char_frame = DIO_CF_8N2;
        break;
     case BS_FRM_Dat8_Par0_St1:
        device_entry->dcbPar.dio_dcb_ser.char_frame = DIO_CF_8N1;
        break;
     case BS_FRM_Dat7_Par0_St2:
        device_entry->dcbPar.dio_dcb_ser.char_frame = DIO_CF_7N2;
        break;
     case BS_FRM_Dat7_Par0_St1:
        device_entry->dcbPar.dio_dcb_ser.char_frame = DIO_CF_7N1;
        break;
     case BS_FRM_Dat8_Par1_St1:
        break;
     case BS_FRM_Dat7_Par1_St1:
        break;
     default:
        return AT_FAIL;
  }
  if (format EQ BS_FRM_Dat8_Par1_St1 OR format EQ BS_FRM_Dat7_Par1_St1)
  {
     switch (parity)
     {
         case BS_PAR_NotPresent:
            /* this case is handled by format translation */
            break;
         case BS_PAR_Odd:
             device_entry->dcbPar.dio_dcb_ser.char_frame = 
                 (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8O1: DIO_CF_7O1);
             break;
         case BS_PAR_Even:
             device_entry->dcbPar.dio_dcb_ser.char_frame = 
                 (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8E1: DIO_CF_7E1);
             break;
         case BS_PAR_Mark: 
             device_entry->dcbPar.dio_dcb_ser.char_frame = 
                 (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8M1: DIO_CF_7M1);
             break;
         case BS_PAR_Space:
             device_entry->dcbPar.dio_dcb_ser.char_frame = 
                 (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8S1: DIO_CF_7S1);
             break;
           default:
              return AT_FAIL;
       }
    }
  }
  else if (device_type EQ DIO_DATA_MUX)
  {
    switch (format)
    {
       case BS_FRM_NotPresent:
          break;
       case BS_FRM_Dat8_Par0_St2:
          device_entry->dcbPar.dio_dcb_ser_mux.char_frame = DIO_CF_8N2;
          break;
       case BS_FRM_Dat8_Par0_St1:
          device_entry->dcbPar.dio_dcb_ser_mux.char_frame = DIO_CF_8N1;
          break;
       case BS_FRM_Dat7_Par0_St2:
          device_entry->dcbPar.dio_dcb_ser_mux.char_frame = DIO_CF_7N2;
          break;
       case BS_FRM_Dat7_Par0_St1:
          device_entry->dcbPar.dio_dcb_ser_mux.char_frame = DIO_CF_7N1;
          break;
       case BS_FRM_Dat8_Par1_St1:
          break;
       case BS_FRM_Dat7_Par1_St1:
          break;
       default:
          return AT_FAIL;
    }
    if (format EQ BS_FRM_Dat8_Par1_St1 OR format EQ BS_FRM_Dat7_Par1_St1)
    {
       switch (parity)
       {
           case BS_PAR_NotPresent:
              /* this case is handled by format translation */
              break;
           case BS_PAR_Odd:
               device_entry->dcbPar.dio_dcb_ser_mux.char_frame = 
                   (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8O1: DIO_CF_7O1);
               break;
           case BS_PAR_Even:
               device_entry->dcbPar.dio_dcb_ser_mux.char_frame = 
                   (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8E1: DIO_CF_7E1);
               break;
           case BS_PAR_Mark: 
               device_entry->dcbPar.dio_dcb_ser_mux.char_frame = 
                   (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8M1: DIO_CF_7M1);
               break;
           case BS_PAR_Space:
               device_entry->dcbPar.dio_dcb_ser_mux.char_frame = 
                   (format EQ BS_FRM_Dat8_Par1_St1 ? DIO_CF_8S1: DIO_CF_7S1);
               break;
           default:
              return AT_FAIL;
     }
  }
}
  psaPSI_SetConfReq(device_entry);
  return AT_EXCT;
}

/*
+------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                     |
| STATE   : code                        ROUTINE : cmhPSI_SetFlowControl  |
+------------------------------------------------------------------------------+

  PURPOSE: set the PSI flow control

*/
GLOBAL T_ACI_RETURN cmhPSI_SetFlowControl (UBYTE srcId, T_ACI_RX_FLOW_CTRL DCE_by_DTE)
{
  U32 flow_control = DIO_FLOW_NONE;
  T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
  U32 device_type;
  
  if ( device_entry EQ NULL )
  {
    TRACE_EVENT_P1("[ERR] cmhPSI_SetFlowControl: device for source ID = %d not found", srcId);
    return AT_FAIL;
  }
  device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
    /*
   *  translate AT command parameter to PSI parameter
   */
  switch ( DCE_by_DTE )
  {
    case   RX_FLOW_NONE:
      flow_control = DIO_FLOW_NONE;
      break;
    case   RX_FLOW_SOFTWARE:
      flow_control = DIO_FLOW_XON_XOFF;
      break;
    case   RX_FLOW_HARDWARE:
      flow_control = DIO_FLOW_RTS_CTS;
      break;
    case RX_FLOW_NotPresent:
      return AT_CMPL;
  }
  cmhPSI_SetDcbParToUnchanged( device_entry );

  /*
   *  translate AT command parameter to PSI parameter
   */

  if (device_type EQ DIO_DATA_SER)
  {
     device_entry->dcbPar.dio_dcb_ser.flow_control= flow_control;
  }
  else if (device_type EQ DIO_DATA_MUX)
  {
     device_entry->dcbPar.dio_dcb_ser_mux.flow_control= flow_control;
  }
  else /*if (device_type EQ DIO_DATA_PKT)*/
  {
     return AT_FAIL;
  }

   psaPSI_SetConfReq(device_entry);
 
  return AT_EXCT;
}


/*
+------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                     |
| STATE   : code                        ROUTINE : cmhPSI_SetEscape  |
+------------------------------------------------------------------------------+

  PURPOSE: set the escape request on or off

*/

GLOBAL T_ACI_RETURN cmhPSI_SetEscape( UBYTE srcId, UBYTE detection )
{
    T_ACI_DEVICE_DCB_ENTRY *device_entry = cmhPSI_GetDeviceParOverSrcID( srcId );
    U32 device_type;
    
    TRACE_FUNCTION("cmhPSI_SetEscape()");

    if ( device_entry EQ NULL )
    {
      TRACE_EVENT_P1("[ERR] cmhPSI_SetEscape: device for source ID = %d not found", srcId);
      return AT_FAIL;
    }
    device_type = device_entry->devId & DIO_TYPE_DAT_MASK;
    cmhPSI_SetDcbParToUnchanged( device_entry );

    if( detection EQ ESC_DETECTION_OFF)
    {
       if (device_type EQ DIO_DATA_SER)
       {
           device_entry->dcbPar.dio_dcb_ser.guard_period= DIO_ESC_OFF;
       }
       else if (device_type EQ DIO_DATA_MUX)
       {
           device_entry->dcbPar.dio_dcb_ser_mux.guard_period= DIO_ESC_OFF;
       }
       else /*if (device_type EQ DIO_DATA_PKT)*/
       {
           return AT_FAIL;
       }
    }
    psaPSI_SetConfReq(device_entry);

    return AT_EXCT;
  }

/*
+--------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSIF                      |
| STATE   : code                        ROUTINE : cmhPSI_GetFktInterfaceFormat  |
+--------------------------------------------------------------------------------+

  PURPOSE: translate the PSI DCB parameter to the AT command format parameter

  ATTENTION: internal function, DCB paramter is not checking of validity

*/
GLOBAL T_ACI_BS_FRM cmhPSI_GetFktInterfaceFormat( T_ACI_DEVICE_DCB_ENTRY *dcbntry )
{
  T_ACI_BS_FRM format = BS_FRM_NotPresent; 
  U32 char_frame = DIO_CF_NOT_VALID;
  U32 device_type;

  device_type = dcbntry->devId & DIO_TYPE_DAT_MASK;
  if (device_type EQ DIO_DATA_SER)
  {
     char_frame = dcbntry->dcbPar.dio_dcb_ser.char_frame;
  }
  else  if (device_type EQ DIO_DATA_MUX)
  {
     char_frame = dcbntry->dcbPar.dio_dcb_ser_mux.char_frame;
  }
     switch (char_frame)
     {
        case DIO_CF_8N2: 
            format = BS_FRM_Dat8_Par0_St2; 
            break;
        case DIO_CF_8N1: 
            format = BS_FRM_Dat8_Par0_St1;
            break;
        case DIO_CF_7N2: 
            format = BS_FRM_Dat7_Par0_St2;
            break;
        case DIO_CF_7N1:  
            format = BS_FRM_Dat7_Par0_St1; 
            break;
        case DIO_CF_8O1:
        case DIO_CF_8E1:
        case DIO_CF_8M1:
        case DIO_CF_8S1: 
            format = BS_FRM_Dat8_Par1_St1;
            break;
        case DIO_CF_7O1:
        case DIO_CF_7E1:
        case DIO_CF_7M1:
        case DIO_CF_7S1: 
            format = BS_FRM_Dat7_Par1_St1;
            break;
    default:
      break;
     }
  return format;
}

/*
+--------------------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)               MODULE  : CMH_PSI                        |
| STATE   : code                        ROUTINE : cmhUART_GetFktInterfaceParity  |
+--------------------------------------------------------------------------------+

  PURPOSE: translate the PSI COM parameter to the AT command parity parameter

  ATTENTION: internal function, COM paramter is is not checking of validity

*/
GLOBAL T_ACI_BS_PAR cmhPSI_GetFktInterfaceParity( T_ACI_DEVICE_DCB_ENTRY *dcbntry )
{
   T_ACI_BS_PAR parity = BS_PAR_NotPresent; 
   U32 char_frame = DIO_CF_NOT_VALID;
   U32 device_type;
   
   device_type = dcbntry->devId & DIO_TYPE_DAT_MASK;
   if (device_type EQ DIO_DATA_SER)
   {
     char_frame = dcbntry->dcbPar.dio_dcb_ser.char_frame;
   }
   else  if (device_type EQ DIO_DATA_MUX)
   {
     char_frame = dcbntry->dcbPar.dio_dcb_ser_mux.char_frame;
   }
     switch (char_frame)
     {
        case DIO_CF_8O1:
        case DIO_CF_7O1:
            parity = BS_PAR_Odd;
            break;
        case DIO_CF_8E1:
        case DIO_CF_7E1:
            parity = BS_PAR_Even;
            break;
        case DIO_CF_8M1:
        case DIO_CF_7M1:
            parity = BS_PAR_Even;
            break;
        case DIO_CF_8S1: 
        case DIO_CF_7S1: 
            parity = BS_PAR_Space;
        break;
      default:
            break;
     }
    return parity;
}
#endif /* DTI */
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_LST            |
| STATE   : code                        ROUTINE : cmhPSI_clean_all_elem  |
+--------------------------------------------------------------------+

  PURPOSE : clean the psi_src_params list.

*/

GLOBAL void cmhPSI_clean_all_elem( )
{
  T_ACI_DTI_PRC_PSI *psi_src_infos = NULL;

  while (1)
  {
    psi_src_infos = (T_ACI_DTI_PRC_PSI *)remove_first_element(psi_src_params);

    if (psi_src_infos EQ NULL)
    {
      break;
    }
    
    if (psi_src_infos->MuxParms NEQ NULL)
    {
       ACI_MFREE (psi_src_infos->MuxParms);
    }
    memset (psi_src_infos, 0x00, sizeof(T_ACI_DTI_PRC_PSI));
    ACI_MFREE (psi_src_infos);
  }
   
  

}

#endif /*FF_PSI*/
/*==== EOF =======================================================*/