FreeCalypso > hg > fc-tourmaline

view src/g23m-aci/aci/cmh_ssq.c @ 287:3dee79757ae4

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_SSS
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module provides the query functions related to the 
|             protocol stack adapter for SS.
+----------------------------------------------------------------------------- 
*/ 

#ifndef CMH_SSQ_C
#define CMH_SSQ_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci.h"
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#include "aci_ext_pers.h"    /* we are using personalisation extensions */
#include "aci_slock.h"          /* in order to asure interfaces */

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#ifdef UART
#include "dti.h"
#include "dti_conn_mng.h"
#endif

#include "ksd.h"
#include "psa.h"
#include "psa_ss.h"
#include "psa_sim.h"
#include "cmh.h"
#include "cmh_ss.h"
#include "cmh_sim.h"

#include "aci_ext_pers.h"
#include "aci_slock.h"

#ifdef FF_PHONE_LOCK
#include "sec_drv.h"
#endif

/*==== CONSTANTS ==================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== PROTOTYPES==================================================*/
/* Implements Measure 193 */
LOCAL T_ACI_RETURN cmhSS_queryHandler (T_ACI_CMD_SRC  srcId, 
                                       void           *stat,
                                       T_ACI_AT_CMD   atCmd,
                                       UBYTE          ssCode);
EXTERN T_ACI_RETURN cmhSS_check_oper_result(T_OPER_RET_STATUS result);

#ifdef FF_PHONE_LOCK
 EXTERN T_OPER_RET_STATUS aci_ext_get_phone_lock_satus(T_SEC_DRV_EXT_PHONE_LOCK_TYPE type,T_SEC_DRV_EXT_PHONE_LOCK_STATUS *status);
#endif
/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCCFC             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CCFC AT command
            which is responsible to query the parameters for call 
            forwarding supplementary services.

            <reason> : reason for CF.
            <class>  : class of basic service.
*/

GLOBAL T_ACI_RETURN qAT_PlusCCFC  ( T_ACI_CMD_SRC   srcId,
                                    T_ACI_CCFC_RSN  reason,
                                    T_ACI_CLASS     class_type  )
{
  SHORT sId;                /* holds service id */
  UBYTE ssCd;               /* holds ss code */

  T_ACI_RETURN   retVal;


  TRACE_FUNCTION ("qAT_PlusCCFC");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

  if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )

    return( AT_BUSY );

  /* Implements Measure # 85 */
  if(!cmhSS_checkCCFC_RSN(reason, &ssCd))
  {
    return( AT_FAIL );
  }     
/*
 *-------------------------------------------------------------------
 * check parameter <class>
 *-------------------------------------------------------------------
 */  
  if( !cmhSS_CheckClassInterr(class_type) )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */

    retVal = cmhSS_CF_SAT_Handle( srcId, reason, CCFC_MOD_Query, NULL, NULL, class_type, NULL, NULL, 0);

    if( retVal NEQ AT_CMPL )
        return( retVal );

/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */  
  sId = psaSS_stbNewEntry();

  if( sId EQ NO_ENTRY )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start first transaction 
 *-------------------------------------------------------------------
 */  
  CCD_START;

  psaSS_asmInterrogateSS( ssCd, SS_NO_PRM, SS_NO_PRM );

  ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
  ssShrdPrm.stb[sId].ssCode     = ssCd;
  ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;
  ssShrdPrm.stb[sId].ClassType  = class_type;

  ssShrdPrm.stb[sId].curCmd = AT_CMD_CCFC;
  cmhSS_flagTrn( sId, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
  psaSS_NewTrns(sId);

  CCD_END;

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */  
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
    T_ACI_CLOG cmdLog;        /* holds logging info */

    cmdLog.atCmd                    = AT_CMD_CCFC;
    cmdLog.cmdType                  = CLOG_TYPE_Query;
    cmdLog.retCode                  = AT_EXCT;
    cmdLog.cId                      = ACI_NumParmNotPresent;
    cmdLog.sId                      = sId+1;
    cmdLog.cmdPrm.qCCFC.srcId       = srcId;
    cmdLog.cmdPrm.qCCFC.reason      = reason;
    cmdLog.cmdPrm.qCCFC.class_type       = class_type;
    rAT_PercentCLOG( &cmdLog );
  }
#endif
  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCLCK             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CLCK AT command
            which is responsible to query the parameters for call 
            barring supplementary services.

            <fac>  : CB facility.
            <class>: class of basic service.
*/

GLOBAL T_ACI_RETURN qAT_PlusCLCK  ( T_ACI_CMD_SRC  srcId,
                                    T_ACI_FAC fac,
                                    T_ACI_CLASS    class_type,
                                    T_ACI_CLSSTAT *clsStat)
{
  UBYTE dummy_slockStat;
  TRACE_FUNCTION ("qAT_PlusCLCK");
  return qAT_PercentCLCK(srcId,fac,class_type, clsStat,&dummy_slockStat);
}

/*QAT_PERCENTCLCK add for Simlock in Riviear MFW

Added by Shen,Chao  April 16th, 2003
*/

GLOBAL T_ACI_RETURN qAT_PercentCLCK  ( T_ACI_CMD_SRC  srcId,
                                    T_ACI_FAC fac,
                                    T_ACI_CLASS    class_type,
                                    T_ACI_CLSSTAT *clsStat,
                                    UBYTE *simClockStat)
{
  SHORT sId;                /* holds service id */
  UBYTE ssCd;               /* holds ss code */
  T_ACI_RETURN   retVal;
#ifdef SIM_PERS
  T_SIMLOCK_TYPE slocktype;
  T_SIMLOCK_STATUS rlockstatus;
  T_OPER_RET_STATUS ret;
#endif


  TRACE_FUNCTION ("qAT_PercentCLCK");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

  if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )
    return( AT_BUSY );

/*
 *-------------------------------------------------------------------
 * check parameter <fac>
 *-------------------------------------------------------------------
 */  
  /* Implements Measure # 166 */
  if( !cmhSS_getSSCd(fac, &ssCd) )
  {
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * if action is related to SS
 *-------------------------------------------------------------------
 */  
  if( ssCd NEQ NOT_PRESENT_8BIT )
  {
  /*
   *-------------------------------------------------------------------
   * check parameter <class>
   *-------------------------------------------------------------------
   */  
    if( !cmhSS_CheckCbClassInterr(class_type))
    { 
      ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
      return( AT_FAIL );
    }

    if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )

      return( AT_BUSY );
  /*
   *-------------------------------------------------------------------
   * check not allowed <fac> (only possible with mode=0 i.e unlock)   
   *-------------------------------------------------------------------
   */  
    if(fac EQ FAC_Ab OR fac EQ FAC_Ag OR fac EQ FAC_Ac)
    {
      ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotAllow );
      return( AT_FAIL );
    }

/* SIM TOOLKIT & FDN HANDLING */

    retVal = cmhSS_Call_Barr_SAT_Handle( srcId, CLCK_MODE_QUERY, fac, NULL, class_type);

    if( retVal NEQ AT_CMPL )
        return( retVal );
   
    
  /*
   *-------------------------------------------------------------------
   * get a new service table entry to interrogate SS
   *-------------------------------------------------------------------
   */  
    sId = psaSS_stbNewEntry();

    if( sId EQ NO_ENTRY )
    { 
      ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
      return( AT_FAIL );
    }

  /*
   *-------------------------------------------------------------------
   * start first transaction
   *-------------------------------------------------------------------
   */ 
    CCD_START;

    psaSS_asmInterrogateSS( ssCd, SS_NO_PRM, SS_NO_PRM );

    ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
    ssShrdPrm.stb[sId].ssCode     = ssCd;
    ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;
    ssShrdPrm.stb[sId].ClassType  = class_type;

    ssShrdPrm.stb[sId].curCmd = AT_CMD_CLCK;
    cmhSS_flagTrn( sId, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
    psaSS_NewTrns(sId);

    CCD_END;
  }

  /*
   *-------------------------------------------------------------------
   * if action is related to SIM
   *-------------------------------------------------------------------
   */  
  else
  {
    switch (fac)
    {
      /*
       *---------------------------------------------------------------
       * access PIN 1 status
       *---------------------------------------------------------------
       */  
      case FAC_Sc:
        clsStat -> class_type  = CLASS_NotPresent; 
        clsStat -> status = STATUS_NotPresent;

        switch( simShrdPrm.PEDStat )
        {
          case( PEDS_ENA ): clsStat -> status = STATUS_Active;
            return( AT_CMPL );
          case( PEDS_DIS ): clsStat -> status = STATUS_NotActive;
            return( AT_CMPL );
          default:
            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail );
            return( AT_FAIL );
        }
       /* break is removed ,as case is returning before break so it is not needed */
      /*
       *---------------------------------------------------------------
       * access fixed dialling feature
       *---------------------------------------------------------------
       */
      case ( FAC_Fd ):
        clsStat -> class_type  = CLASS_NotPresent;
        clsStat -> status = STATUS_NotPresent;

        if( simShrdPrm.SIMStat EQ SS_OK )
        {
          switch( simShrdPrm.crdFun )
          {
            case( SIM_ADN_ENABLED ): 
            case( SIM_ADN_BDN_ENABLED ): clsStat -> status = STATUS_NotActive;
               return( AT_CMPL );
            case( SIM_FDN_ENABLED ): 
            case( SIM_FDN_BDN_ENABLED ): clsStat -> status = STATUS_Active;
               return( AT_CMPL );
            case( SIM_NO_OPERATION ): 
            default:

              ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail );
              return( AT_FAIL );
          }
        }
        else
        {
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_SimFail );
          return( AT_FAIL );
        }
       /* break is removed ,as case is returning before break so it is not needed */
      /*
       *---------------------------------------------------------------
       * lock ALS setting with PIN2
       *---------------------------------------------------------------
       */
      case FAC_Al:
        clsStat -> class_type  = CLASS_NotPresent; 
        clsStat -> status = STATUS_NotPresent;

        switch( ALSlock )
        {
          case( ALS_MOD_SPEECH ):
          case( ALS_MOD_AUX_SPEECH ):
            clsStat -> status = STATUS_Active;
            return( AT_CMPL );
            
          case( ALS_MOD_NOTPRESENT ):
            clsStat -> status = STATUS_NotActive;
            return( AT_CMPL );
            
          default:
            ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_OpNotSupp );
            return( AT_FAIL );
        }
           /* break is removed ,as case is returning before break so it is not needed */
#ifdef SIM_PERS
      /*
       *---------------------------------------------------------------
       * ME Personalisation
       *---------------------------------------------------------------
       */
            
      case FAC_Pn:
      case FAC_Pu:
      case FAC_Pp:
      case FAC_Pc:
      case FAC_Ps:
      case FAC_Pf:
      case FAC_Bl:

        clsStat -> class_type  = CLASS_NotPresent; 
        clsStat -> status = STATUS_NotPresent;
      
        switch (fac)
        {
          case FAC_Pn: slocktype = SIMLOCK_NETWORK; break;
          case FAC_Pu: slocktype = SIMLOCK_NETWORK_SUBSET; break;
          case FAC_Pp: slocktype = SIMLOCK_SERVICE_PROVIDER; break;
          case FAC_Pc: slocktype = SIMLOCK_CORPORATE; break;
          case FAC_Ps: slocktype = SIMLOCK_SIM; break;
          case FAC_Pf: slocktype = SIMLOCK_FIRST_SIM; break;
          case FAC_Bl: slocktype = SIMLOCK_BLOCKED_NETWORK; break;
          default: slocktype = SIMLOCK_NETWORK;
        }
   aci_ext_personalisation_init();
        rlockstatus = aci_personalisation_get_status(slocktype);  /* Changed to aci_personalisatio_get_status 
                                                                 from aci_ext_personalisatio_get_status on 11/03/2005 */
   aci_ext_personalisation_free();
   if (rlockstatus EQ SIMLOCK_ENABLED)
   {
          clsStat -> status = STATUS_Active;
     return( AT_CMPL );
   }
   else if (rlockstatus EQ SIMLOCK_DISABLED)
   {
     clsStat -> status = STATUS_NotActive;
          return( AT_CMPL );
   }
   else
   {
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown );
          return( AT_FAIL );
   }

    case( FAC_Mu )  :
    case( FAC_Mum ) :
    {
      clsStat->class_type = CLASS_NotPresent;
      clsStat->status     = STATUS_NotPresent;
      ret = aci_slock_master_unlock( NULL );
      switch (ret)
      {
        case OPER_SUCCESS:
        case OPER_WRONG_PASSWORD:
          clsStat->status = STATUS_Active;
          return( AT_CMPL );
        case OPER_NOT_ALLOWED:
          clsStat->status = STATUS_NotActive;
          return( AT_CMPL ); 
        case OPER_FAIL:
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme,CME_ERR_Unknown );
          return( AT_FAIL );
        default:
          ACI_ERR_DESC( ACI_ERR_CLASS_Cme,CME_ERR_Unknown );
          return( AT_FAIL );            
      }
    }
#endif

#ifdef FF_PHONE_LOCK
   case(FAC_Pl) :
    {
      clsStat->class_type = CLASS_NotPresent;
      clsStat->status     = STATUS_NotPresent;
      ret = aci_ext_get_phone_lock_satus(PHONE_LOCK,(T_SEC_DRV_EXT_PHONE_LOCK_STATUS *)&clsStat->status);
      return(cmhSS_check_oper_result(ret));
    }
   case(FAC_Apl) :
    {
      clsStat->class_type = CLASS_NotPresent;
      clsStat->status     = STATUS_NotPresent;
      ret = aci_ext_get_phone_lock_satus(AUTO_LOCK,(T_SEC_DRV_EXT_PHONE_LOCK_STATUS *)&clsStat->status);
      return(cmhSS_check_oper_result(ret));
    }
#endif
    
      /*
       *---------------------------------------------------------------
       * Error handling
       *---------------------------------------------------------------
       */
      default:
        ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown );
        return( AT_FAIL );
    }
  }

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */  
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd                   = AT_CMD_CLCK;
  cmdLog.cmdType                 = CLOG_TYPE_Query;
  cmdLog.retCode                 = AT_EXCT;
  cmdLog.cId                     = ACI_NumParmNotPresent;
  cmdLog.sId                     = sId+1;
  cmdLog.cmdPrm.qCLCK.srcId      = srcId;
  cmdLog.cmdPrm.qCLCK.fac        = fac;
  cmdLog.cmdPrm.qCLCK.class_type = class_type;

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCCWA             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CCWA AT command
            which is responsible to query the parameters for call
            waiting supplementary services.

            <class>   : class of basic service.
*/

GLOBAL  T_ACI_RETURN qAT_PlusCCWA (T_ACI_CMD_SRC  srcId, 
                                   T_ACI_CLASS    class_type)
{
  SHORT sId;         /* holds service id */

  T_ACI_RETURN   retVal;

  TRACE_FUNCTION ("qAT_PlusCCWA ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

  if( cmhPrm[srcId].ssCmdPrm.mltyTrnFlg NEQ 0 )

    return( AT_BUSY );

/*
 *-------------------------------------------------------------------
 * check parameter <class>
 *-------------------------------------------------------------------
 */  
  if( !cmhSS_CheckClassInterr(class_type) )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter );
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */
    retVal = cmhSS_CW_SAT_Handle( srcId, CCFC_MOD_Query, class_type);

    if( retVal NEQ AT_CMPL )
        return( retVal );

/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */  
  sId = psaSS_stbNewEntry();

  if( sId EQ NO_ENTRY )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * start first transaction
 *-------------------------------------------------------------------
 */ 
  CCD_START;

  psaSS_asmInterrogateSS( SS_CD_CW, SS_NO_PRM, SS_NO_PRM );

  ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
  ssShrdPrm.stb[sId].ssCode     = SS_CD_CW;
  ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;
  ssShrdPrm.stb[sId].ClassType  = class_type;

  ssShrdPrm.stb[sId].curCmd = AT_CMD_CCWA;
  cmhSS_flagTrn( sId, &(cmhPrm[srcId].ssCmdPrm.mltyTrnFlg));
  psaSS_NewTrns(sId);

  CCD_END;

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */  
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
    T_ACI_CLOG cmdLog;        /* holds logging info */

    cmdLog.atCmd                   = AT_CMD_CCWA;
    cmdLog.cmdType                 = CLOG_TYPE_Query;
    cmdLog.retCode                 = AT_EXCT;
    cmdLog.cId                     = ACI_NumParmNotPresent;
    cmdLog.sId                     = sId+1;
    cmdLog.cmdPrm.qCCWA.srcId      = srcId;
    cmdLog.cmdPrm.qCCWA.class_type = class_type;

    rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCLIP             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CLIP AT command
            which is responsible to query the setting for calling
            line indication supplementary services.

            <stat>   : CLIP status.
*/

GLOBAL T_ACI_RETURN qAT_PlusCLIP  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_CLIP_STAT * stat)
{
  /* Implements Measure 193 */
  TRACE_FUNCTION ("qAT_PlusCLIP ()");
  return (cmhSS_queryHandler (srcId, 
                              (void*)stat,
                              AT_CMD_CLIP,
                              SS_CD_CLIP) );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCLIR             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +CLIR AT command
            which is responsible to query the setting for calling
            line restriction supplementary services.

            <mode>   : CLIR mode.
            <stat>   : CLIR status.
*/

GLOBAL T_ACI_RETURN qAT_PlusCLIR  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_CLIR_MOD * mode,
                                    T_ACI_CLIR_STAT * stat)
{
  SHORT sId;                /* holds service id */

   T_ACI_RETURN   retVal;
 
  TRACE_FUNCTION ("qAT_PlusCLIR ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */
    retVal = cmhSS_CLIR_SAT_Handle( srcId);

    if( retVal NEQ AT_CMPL )
        return( retVal );


/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */  
  sId = psaSS_stbNewEntry();

  if( sId EQ NO_ENTRY )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * set up  facility information element
 *-------------------------------------------------------------------
 */ 
  CCD_START;

  psaSS_asmInterrogateSS( SS_CD_CLIR, SS_NO_PRM, SS_NO_PRM );
/*
 *-----------------------------------------------------------------
 * declare service table entry as used and the owner of the service
 *-----------------------------------------------------------------
 */  
  ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
  ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;

/*
 *-------------------------------------------------------------------
 * start a new transaction 
 *-------------------------------------------------------------------
 */  
  ssShrdPrm.stb[sId].curCmd = AT_CMD_CLIR;
  psaSS_NewTrns(sId);

  CCD_END;

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */  
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
 {
   T_ACI_CLOG cmdLog;        /* holds logging info */

   cmdLog.atCmd              = AT_CMD_CLIR;
   cmdLog.cmdType            = CLOG_TYPE_Query;
   cmdLog.retCode            = AT_EXCT;
   cmdLog.cId                = ACI_NumParmNotPresent;
   cmdLog.sId                = sId+1;
   cmdLog.cmdPrm.qCLIR.srcId = srcId;
   cmdLog.cmdPrm.qCLIR.stat  = stat;
   cmdLog.cmdPrm.qCLIR.mode  = mode;
   rAT_PercentCLOG( &cmdLog );
 }
#endif

  return( AT_EXCT );
}


GLOBAL T_ACI_RETURN qAT_PercentCLIR  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_CLIR_MOD * mode)
{
   T_CC_CMD_PRM  *pCCCmdPrm;  /* points to CC command parameters */
   TRACE_FUNCTION ("qAT_PercentCLIR ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

   pCCCmdPrm  = &cmhPrm[srcId].ccCmdPrm;   
   *mode = pCCCmdPrm->CLIRmode;
  
   return AT_CMPL;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PlusCOLP             |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the +COLP AT command
            which is responsible to query the setting for connected
            line presentation supplementary services.

            <stat>   : COLP status.
*/

GLOBAL T_ACI_RETURN qAT_PlusCOLP  ( T_ACI_CMD_SRC srcId,
                                    T_ACI_COLP_STAT * stat)
{
  /* Implements Measure 193 */
  TRACE_FUNCTION ("qAT_PercentCOLP ()");
  return (cmhSS_queryHandler (srcId, 
                              (void*)stat,
                              AT_CMD_COLP,
                              SS_CD_COLP) );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PercentCOLR          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %COLR AT command
            which is responsible to query the setting for connected
            line restriction supplementary services.

            <stat>   : COLR status.
*/

GLOBAL T_ACI_RETURN qAT_PercentCOLR  ( T_ACI_CMD_SRC srcId )
{
  /* Implements Measure 193 */
  TRACE_FUNCTION ("qAT_PercentCOLR ()");
  return (cmhSS_queryHandler (srcId, 
                              NULL,
                              AT_CMD_COLR,
                              SS_CD_COLR));
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PercentCCBS          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CCBS AT command
            which is responsible to query the setting for connected
            line restriction supplementary services.

*/

GLOBAL T_ACI_RETURN qAT_PercentCCBS  ( T_ACI_CMD_SRC srcId )
{
  SHORT sId;                /* holds service id */

   T_ACI_RETURN   retVal;
 

  TRACE_FUNCTION ("qAT_PercentCCBS ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */
    retVal = cmhSS_CCBS_SAT_Handle( srcId, CCBS_MOD_Query, -1);

    if( retVal NEQ AT_CMPL )
        return( retVal );
  


/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */  
  sId = psaSS_stbNewEntry();

  if( sId EQ NO_ENTRY )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * set up  facility information element
 *-------------------------------------------------------------------
 */ 
  CCD_START;

  psaSS_asmInterrogateSS( SS_CD_CCBS, SS_NO_PRM, SS_NO_PRM );
/*
 *-----------------------------------------------------------------
 * declare service table entry as used and the owner of the service
 *-----------------------------------------------------------------
 */  
  ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
  ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;

/*
 *-------------------------------------------------------------------
 * start a new transaction 
 *-------------------------------------------------------------------
 */  
  ssShrdPrm.stb[sId].curCmd = AT_CMD_CCBS;
  psaSS_NewTrns(sId);

  CCD_END;

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */  
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd              = AT_CMD_CCBS;
  cmdLog.cmdType            = CLOG_TYPE_Query;
  cmdLog.retCode            = AT_EXCT;
  cmdLog.cId                = ACI_NumParmNotPresent;
  cmdLog.sId                = sId+1;
  cmdLog.cmdPrm.qCCBS.srcId = srcId;

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PercentCNAP          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CNAP AT command
            which is responsible to query the setting for calling
            name presentation supplementary services.

*/

GLOBAL T_ACI_RETURN qAT_PercentCNAP  ( T_ACI_CMD_SRC srcId )
{
  /* Implements Measure 193 */
  TRACE_FUNCTION ("qAT_PercentCNAP ()");
  return (cmhSS_queryHandler (srcId, 
                              NULL,
                              AT_CMD_CNAP,
                              SS_CD_CNAP) );
}


#ifdef TI_PS_FF_AT_P_CMD_CSCN
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_SSQ                  |
| STATE   : code                  ROUTINE : qAT_PercentCSCN          |
+--------------------------------------------------------------------+

  PURPOSE : This is the functional counterpart to the %CSCN AT command
            which is responsible to query the settings.

*/
GLOBAL T_ACI_RETURN qAT_PercentCSCN ( T_ACI_CMD_SRC srcId,
                                   T_ACI_SS_CSCN_MOD_STATE     *ss_switch,
                                   T_ACI_SS_CSCN_MOD_DIRECTION *ss_direction,
                                   T_ACI_CC_CSCN_MOD_STATE     *cc_switch,
                                   T_ACI_CC_CSCN_MOD_DIRECTION *cc_direction )
{
  TRACE_FUNCTION ("qAT_PercentCSCN ()");

  if(!cmh_IsVldCmdSrc (srcId))
  { /* check command source */
    return( AT_FAIL );
  }

  *ss_switch    = cmhPrm[srcId].ssCmdPrm.CSCNss_mode.SsCSCNModeState;
  *ss_direction = cmhPrm[srcId].ssCmdPrm.CSCNss_mode.SsCSCNModeDirection;
  *cc_switch    = cmhPrm[srcId].ccCmdPrm.CSCNcc_mode.CcCSCNModeState;
  *cc_direction = cmhPrm[srcId].ccCmdPrm.CSCNcc_mode.CcCSCNModeDirection;

  return( AT_CMPL);
}
#endif /* TI_PS_FF_AT_P_CMD_CSCN */

#ifdef SIM_PERS
/*
+===========================================================+
| PROJECT : GSM-PS (6147)      MODULE  : CMH_SSQ            |
| STATE   : code               ROUTINE : qAT_PercentMEPD    |
|                                                           |
|This is the functional counterpart to the %MEPD AT command |
|which is responsible to query MEPD Configuration Data.     |
+===========================================================+
*/



GLOBAL T_ACI_RETURN qAT_PercentMEPD( T_ACI_CMD_SRC srcId, T_SUP_INFO *sup_info)
{
  T_OPER_RET_STATUS rlockstatus;

  TRACE_FUNCTION ("qAT_ PercentMEPD()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */
  if(!cmh_IsVldCmdSrc (srcId))
  {
    return( AT_FAIL );
  }
  rlockstatus=aci_slock_sup_info(sup_info);

  if (rlockstatus EQ OPER_SUCCESS)
  {
    return (AT_CMPL);
  }
  else if (rlockstatus EQ OPER_FAIL)
  {
    ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_Unknown);
    return( AT_FAIL );
  }
  return( AT_EXCT );
}
#endif /* SIM_PERS */




/* Implements Measure 193 */
/*
+=============================================================+
| PROJECT : GSM-PS (6147)      MODULE  : CMH_SSQ              |
| STATE   : code               ROUTINE : cmhSS_queryHandler   |
| PARAMETERS  : srcId - Source of AT Command                  |
|               stat - CLIP or COLP provisioning status       |
|               atCmd - AT Command sent for querying          |
|               ssCode - Supplementary service code           | 
| RETURN      : Query status                                  |
|This contains common code for handling CLIP, COLP, COLR, CNAP|
+=============================================================+
*/
LOCAL T_ACI_RETURN cmhSS_queryHandler (T_ACI_CMD_SRC  srcId, 
                                       void           *stat,
                                       T_ACI_AT_CMD   atCmd,
                                       UBYTE          ssCode)
{
  SHORT sId;                /* holds service id */

  T_ACI_RETURN   retVal = AT_FAIL;
 
  TRACE_FUNCTION ("cmhSS_queryHandler ()");

/*
 *-------------------------------------------------------------------
 * check command source
 *-------------------------------------------------------------------
 */  
  if(!cmh_IsVldCmdSrc (srcId)) 
  { 
    return( AT_FAIL );
  }

/* SIM TOOLKIT & FDN HANDLING */
   switch(atCmd)
   {
     case AT_CMD_CLIP:
      retVal = cmhSS_CLIP_SAT_Handle(srcId);
      break;
     case AT_CMD_COLP:
      retVal = cmhSS_COLP_SAT_Handle(srcId);
      break;
    case AT_CMD_COLR:
      retVal = cmhSS_COLR_SAT_Handle(srcId);
      break;
     case AT_CMD_CNAP:
      retVal = cmhSS_CNAP_SAT_Handle(srcId);
      break;
   }

    if( retVal NEQ AT_CMPL )
    {
      return( retVal );
    }
/*
 *-------------------------------------------------------------------
 * get a new service table entry to interrogate SS
 *-------------------------------------------------------------------
 */  
  sId = psaSS_stbNewEntry();

  if( sId EQ NO_ENTRY )
  { 
    ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_SrvTabFull );
    return( AT_FAIL );
  }

/*
 *-------------------------------------------------------------------
 * set up  facility information element
 *-------------------------------------------------------------------
 */ 
  CCD_START;

  psaSS_asmInterrogateSS( ssCode, SS_NO_PRM, SS_NO_PRM );
/*
 *-----------------------------------------------------------------
 * declare service table entry as used and the owner of the service
 *-----------------------------------------------------------------
 */  
  ssShrdPrm.stb[sId].ntryUsdFlg = TRUE;
  ssShrdPrm.stb[sId].srvOwn     = (T_OWN)srcId;

/*
 *-------------------------------------------------------------------
 * start a new transaction 
 *-------------------------------------------------------------------
 */  
  ssShrdPrm.stb[sId].curCmd = atCmd;
  psaSS_NewTrns(sId);

  CCD_END;

/*
 *-------------------------------------------------------------------
 * log command execution
 *-------------------------------------------------------------------
 */  
#if defined SMI OR defined MFW OR defined FF_MMI_RIV
  {
  T_ACI_CLOG cmdLog;        /* holds logging info */

  cmdLog.atCmd              = atCmd;
  cmdLog.cmdType            = CLOG_TYPE_Query;
  cmdLog.retCode            = AT_EXCT;
  cmdLog.cId                = ACI_NumParmNotPresent;
  cmdLog.sId                = sId+1;
  switch(atCmd)
  {
    case AT_CMD_CLIP:    
      cmdLog.cmdPrm.qCLIP.srcId = srcId;
      cmdLog.cmdPrm.qCLIP.stat  = (T_ACI_CLIP_STAT *)stat;
      break;
    case AT_CMD_COLP:
      cmdLog.cmdPrm.qCOLP.srcId = srcId;
      cmdLog.cmdPrm.qCOLP.stat  = (T_ACI_COLP_STAT *)stat;
      break;
    default:
      break;
  }

  rAT_PercentCLOG( &cmdLog );
  }
#endif

  return( AT_EXCT );
}

/*==== EOF ========================================================*/