FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/cmh_t30q.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_T30Q +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the query functions related to the | protocol stack adapter for T30. +----------------------------------------------------------------------------- */ #if defined (DTI) || defined (FF_FAX) #ifndef CMH_T30Q_C #define CMH_T30Q_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "dti.h" #include "dti_conn_mng.h" #include "aci_fd.h" #include "psa.h" #include "psa_t30.h" #include "cmh.h" #include "cmh_t30.h" #include "cmh_ra.h" /*==== CONSTANTS ==================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFCLASS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FCLASS? AT command which returns the current setting of class mode. <class_type>: class mode. */ GLOBAL T_ACI_RETURN qAT_PlusFCLASS ( T_ACI_CMD_SRC srcId, T_ACI_FCLASS_CLASS* class_type ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFCLASS()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *class_type = pT30CmdPrm -> FCLASSclass; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFCR | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FCR? AT command which returns the current setting of the receive capability. <value>: receive capability. */ GLOBAL T_ACI_RETURN qAT_PlusFCR ( T_ACI_CMD_SRC srcId, T_ACI_FCR_VAL* value ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFCR()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = pT30CmdPrm -> FCRval; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFLI | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FLI? AT command which returns the current setting for the local id string (CSI/TSI). <idStr>: local id string(0 terminated). */ GLOBAL T_ACI_RETURN qAT_PlusFLI ( T_ACI_CMD_SRC srcId, CHAR * idStr ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFLI()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ strncpy( idStr, pT30CmdPrm -> FLIstr, MAX_ID_CHAR-1 ); idStr[MAX_ID_CHAR-1] = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFPI | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FPI? AT command which returns the current setting for the local id string (CGI). <idStr>: local id string(0 terminated). */ GLOBAL T_ACI_RETURN qAT_PlusFPI ( T_ACI_CMD_SRC srcId, CHAR * idStr ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFPI()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ strncpy( idStr, pT30CmdPrm -> FPIstr, MAX_ID_CHAR-1 ); idStr[MAX_ID_CHAR-1] = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFSA | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FSA? AT command which returns the current setting for the destination subaddress string. <subStr>: destination subaddress string (0 terminated). */ GLOBAL T_ACI_RETURN qAT_PlusFSA ( T_ACI_CMD_SRC srcId, CHAR * subStr ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFSA()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ strncpy( subStr, pT30CmdPrm -> FSAsub, MAX_ID_CHAR-1 ); subStr[MAX_ID_CHAR-1] = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFPA | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FPA? AT command which returns the current setting for the selective polling address. <idStr>: selective polling address string(0 terminated). */ GLOBAL T_ACI_RETURN qAT_PlusFPA ( T_ACI_CMD_SRC srcId, CHAR * sepStr ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFPA()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ strncpy( sepStr, pT30CmdPrm -> FPAsep, MAX_ID_CHAR-1 ); sepStr[MAX_ID_CHAR-1] = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFPW | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FPW? AT command which returns the current setting for the password string. <idStr>: password string(0 terminated). */ GLOBAL T_ACI_RETURN qAT_PlusFPW ( T_ACI_CMD_SRC srcId, CHAR * pwdStr ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFPW()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ strncpy( pwdStr, pT30CmdPrm -> FPWpwd, MAX_ID_CHAR-1 ); pwdStr[MAX_ID_CHAR-1] = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFCC | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FCC? AT command which returns the current setting of the DCE capabilities. <vr>: resolution. <br>: bit rate. <wd>: page width. <ln>: page length. <df>: data compression. <ec>: error correction. <bt>: file transer. <st>: scan time. <jp>: JPEG mode. */ GLOBAL T_ACI_RETURN qAT_PlusFCC ( T_ACI_CMD_SRC srcId, T_ACI_F_VR* vr, T_ACI_F_BR* br, T_ACI_F_WD* wd, T_ACI_F_LN* ln, T_ACI_F_DF* df, T_ACI_F_EC* ec, T_ACI_F_BF* bf, T_ACI_F_ST* st, T_ACI_F_JP* jp ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFCC()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in the parameters *------------------------------------------------------------------- */ *vr = pT30CmdPrm -> FCCvr; *br = pT30CmdPrm -> FCCbr; *wd = pT30CmdPrm -> FCCwd; *ln = pT30CmdPrm -> FCCln; *df = pT30CmdPrm -> FCCdf; *ec = pT30CmdPrm -> FCCec; *bf = pT30CmdPrm -> FCCbf; *st = pT30CmdPrm -> FCCst; *jp = pT30CmdPrm -> FCCjp; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFIS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FIS? AT command which returns the settings of the current session capabilities. <vr>: resolution. <br>: bit rate. <wd>: page width. <ln>: page length. <df>: data compression. <ec>: error correction. <bt>: file transer. <st>: scan time. <jp>: JPEG mode. */ GLOBAL T_ACI_RETURN qAT_PlusFIS ( T_ACI_CMD_SRC srcId, T_ACI_F_VR* vr, T_ACI_F_BR* br, T_ACI_F_WD* wd, T_ACI_F_LN* ln, T_ACI_F_DF* df, T_ACI_F_EC* ec, T_ACI_F_BF* bf, T_ACI_F_ST* st, T_ACI_F_JP* jp ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFIS()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in the parameters *------------------------------------------------------------------- */ *vr = pT30CmdPrm -> FISvr; *br = pT30CmdPrm -> FISbr; *wd = pT30CmdPrm -> FISwd; *ln = pT30CmdPrm -> FISln; *df = pT30CmdPrm -> FISdf; *ec = pT30CmdPrm -> FISec; *bf = pT30CmdPrm -> FISbf; *st = pT30CmdPrm -> FISst; *jp = pT30CmdPrm -> FISjp; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFNS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FNS? AT command which returns the current length and setting for the non-standard facility string. <len>: length of nsf string in bytes. <nsf>: nsf string. */ GLOBAL T_ACI_RETURN qAT_PlusFNS ( T_ACI_CMD_SRC srcId, UBYTE * len, UBYTE * nsf ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFNS()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ if (pT30CmdPrm -> FNSlen) { memcpy( nsf, pT30CmdPrm -> FNSoct, pT30CmdPrm -> FNSlen ); } *len = pT30CmdPrm -> FNSlen; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFLP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FLP? AT command which returns the current setting of indication for a document to poll. <value>: polling indication. */ GLOBAL T_ACI_RETURN qAT_PlusFLP ( T_ACI_CMD_SRC srcId, T_ACI_FLP_VAL* value ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFLP()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = pT30CmdPrm -> FLPval; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFCQ | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FCQ? AT command which returns the current setting for copy quality. <rq>: receive quality. <tq>: transmit quality. */ GLOBAL T_ACI_RETURN qAT_PlusFCQ (T_ACI_CMD_SRC srcId, T_ACI_FCQ_RQ * rq, T_ACI_FCQ_TQ * tq ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFCQ()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *rq = pT30CmdPrm -> FCQrq; *tq = FCQ_TQ_CQCDisabled; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFRQ | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FRQ? AT command which returns the current setting for receive quality thresholds. <pgl>: percentage of good lines. <cbl>: consecutive bad lines. */ GLOBAL T_ACI_RETURN qAT_PlusFRQ (T_ACI_CMD_SRC srcId, SHORT * pgl, SHORT * cbl ) { TRACE_FUNCTION ("qAT_PlusFRQ()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *pgl = 0; *cbl = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFHS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FRQ? AT command which returns the current call termination status. <status>: call termination status. */ GLOBAL T_ACI_RETURN qAT_PlusFHS (T_ACI_CMD_SRC srcId, T_ACI_FHS_STAT * status ) { TRACE_FUNCTION ("qAT_PlusFHS()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *status = FHSstat; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFIT | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FIT? AT command which returns the current setting for inactivity timer. <time>: inactivity timeout. <act> : action. */ GLOBAL T_ACI_RETURN qAT_PlusFIT (T_ACI_CMD_SRC srcId, SHORT * time, T_ACI_FIT_ACT * act ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFIT()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *act = pT30CmdPrm -> FITact; *time = pT30CmdPrm -> FITtime / 1000; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFBO | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FBO? AT command which returns the current setting for data bit order. <value>: data bit order. */ GLOBAL T_ACI_RETURN qAT_PlusFBO (T_ACI_CMD_SRC srcId, T_ACI_FBO_VAL * value ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFBO()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = pT30CmdPrm -> FBOval; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFBS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FBS? AT command which returns the current setting of buffer sizes. <tbs>: transmit buffer size. <rbs>: receive buffer size. */ GLOBAL T_ACI_RETURN qAT_PlusFBS (T_ACI_CMD_SRC srcId, SHORT * tbs, SHORT * rbs ) { TRACE_FUNCTION ("qAT_PlusFBS()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *tbs = (SHORT)t30ShrdPrm.tbs; *rbs = (SHORT)t30ShrdPrm.rbs; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFEA | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FEA? AT command which returns the current setting for phase C EOL alignment. <value>: alignment. */ GLOBAL T_ACI_RETURN qAT_PlusFEA (T_ACI_CMD_SRC srcId, SHORT * value ) { TRACE_FUNCTION ("qAT_PlusFEA()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = 0; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFCT | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FCT? AT command which returns the current setting phase C response timeout. <value>: timeout. */ GLOBAL T_ACI_RETURN qAT_PlusFCT (T_ACI_CMD_SRC srcId, SHORT * value ) { TRACE_FUNCTION ("qAT_PlusFCT()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = 30; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFMS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FMS? AT command which returns the current setting for minimum phase C speed. <br>: minimum phase C speed. */ GLOBAL T_ACI_RETURN qAT_PlusFMS (T_ACI_CMD_SRC srcId, T_ACI_F_BR * br) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFMS()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *br = pT30CmdPrm -> FMSbr; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFIE | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FIE? AT command which returns the current setting for procedure interrupt enable. <value>: PI enable. */ GLOBAL T_ACI_RETURN qAT_PlusFIE (T_ACI_CMD_SRC srcId, T_ACI_FIE_VAL *value) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFIE()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = pT30CmdPrm -> FIEval; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFFC | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FFC? AT command which returns the current setting of format converersion parameters. <vrc>: vertical resolution format. <dfc>: data format. <lnc>: page length format. <wdc>: page width format. */ GLOBAL T_ACI_RETURN qAT_PlusFFC (T_ACI_CMD_SRC srcId, T_ACI_FFC_VRC * vrc, T_ACI_FFC_DFC * dfc, T_ACI_FFC_LNC * lnc, T_ACI_FFC_WDC * wdc) { TRACE_FUNCTION ("qAT_PlusFFC()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *vrc = FFC_VRC_Ignored; *dfc = FFC_DFC_Ignored; *lnc = FFC_LNC_Ignored; *wdc = FFC_WDC_Ignored; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFCS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FCS? AT command which returns the current session results. <vr>: resolution. <br>: bit rate. <wd>: page width. <ln>: page length. <df>: data compression. <ec>: error correction. <bt>: file transer. <st>: scan time. <jp>: JPEG mode. */ GLOBAL T_ACI_RETURN qAT_PlusFCS (T_ACI_CMD_SRC srcId, T_ACI_F_VR * vr, T_ACI_F_BR * br, T_ACI_F_WD * wd, T_ACI_F_LN * ln, T_ACI_F_DF * df, T_ACI_F_EC * ec, T_ACI_F_BF * bf, T_ACI_F_ST * st, T_ACI_F_JP * jp) { TRACE_FUNCTION ("qAT_PlusFCS()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ #ifdef _SIMULATION_ /* simulates negotiation */ { T_T30_CMD_PRM *pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; *vr = pT30CmdPrm->FISvr; *br = pT30CmdPrm->FISbr; *wd = pT30CmdPrm->FISwd; *ln = pT30CmdPrm->FISln; *df = pT30CmdPrm->FISdf; *ec = pT30CmdPrm->FISec; *bf = pT30CmdPrm->FISbf; *st = pT30CmdPrm->FISst; *jp = pT30CmdPrm->FISjp; } #else *vr = t30NgtPrms.FCSvr; *br = t30NgtPrms.FCSbr; *wd = t30NgtPrms.FCSwd; *ln = t30NgtPrms.FCSln; *df = t30NgtPrms.FCSdf; *ec = t30NgtPrms.FCSec; *bf = t30NgtPrms.FCSbf; *st = t30NgtPrms.FCSst; *jp = t30NgtPrms.FCSjp; #endif return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FPS? AT command which returns the current setting of the post page response. <ppr>: post page response. */ GLOBAL T_ACI_RETURN qAT_PlusFPS (T_ACI_CMD_SRC srcId, T_ACI_FPS_PPR * ppr ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFPS()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *ppr = pT30CmdPrm -> FPSppr; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFSP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FSP? AT command which returns the current polling possibilities. <value>: polling mode. */ GLOBAL T_ACI_RETURN qAT_PlusFSP (T_ACI_CMD_SRC srcId, T_ACI_FSP_VAL * value ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFSP()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *value = pT30CmdPrm -> FSPval; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_T30Q | | STATE : code ROUTINE : qAT_PlusFAP | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +FAP? AT command which returns the current address and polling capabilities. <sub>: destination subaddressing. <sep>: selective polling. <pwd>: password. */ GLOBAL T_ACI_RETURN qAT_PlusFAP (T_ACI_CMD_SRC srcId, T_ACI_FAP_VAL * sub, T_ACI_FAP_VAL * sep, T_ACI_FAP_VAL * pwd ) { T_T30_CMD_PRM * pT30CmdPrm; /* points to T30 command parameters */ TRACE_FUNCTION ("qAT_PlusFAP()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pT30CmdPrm = &fnd_cmhPrm[srcId].t30CmdPrm; /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *sub = pT30CmdPrm -> FAPsub; *sep = pT30CmdPrm -> FAPsep; *pwd = pT30CmdPrm -> FAPpwd; return( AT_CMPL ); } #endif /* DTI OR FF_FAX*/ /*==== EOF ========================================================*/