view src/g23m-aci/aci/psa_ipas.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_IPAS
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :
+-----------------------------------------------------------------------------
*/
#if defined (FF_WAP) || defined (FF_SAT_E)

#ifndef PSA_IPAS_C
#define PSA_IPAS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#include "aci.h"
#include "psa.h"
//#include "psa_l2r.h"
#include "psa_cc.h"
#include "aci_fd.h"
#include "cmh.h"
#include "dti_conn_mng.h"
//#include "cmh_l2r.h"

#include "wap_aci.h"
#include "psa_tcpip.h"

#ifdef GPRS
#include "gaci.h"
#include "cmh_sm.h"
#endif

/*==== CONSTANTS ==================================================*/


/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPA                      |
|                            ROUTINE : psaIPA_Config                |
+-------------------------------------------------------------------+

  PURPOSE : Configurate or disconfigurate IPA.

*/

GLOBAL void psaIPA_Config(ULONG ip, USHORT max_trans_unit, T_ACI_IPA_DIRC dirc
                      /*T_ACI_AT_CMD at_cmd */)
{
                  /* dirc = IPA_CONN if IPA is to be activated
                     dirc = IPA_DSC if IPA i to be deactivated */

  TRACE_FUNCTION("psaIPA_Config()") ;

  switch( dirc )
  {

  case ( IPA_CONN ):
    wap_state = IPA_Configuration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = ip;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_UP;
      ipa_config_req -> mtu = max_trans_unit;

      PSENDX(IP,ipa_config_req);
    }
    break;

  case ( IPA_DSC ):
    wap_state = IPA_Deconfiguration;
    {
      PALLOC(ipa_config_req,IPA_CONFIG_REQ);
      ipa_config_req -> ip = 0;
      ipa_config_req->peer_ip = 0;
      ipa_config_req->cmd = IPA_CONFIG_DOWN;
      ipa_config_req -> mtu = 0;

      PSENDX(IP,ipa_config_req);
    }
    break;
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_IPAS                     |
|                            ROUTINE : psaIPA_Dti_Req               |
+-------------------------------------------------------------------+

  PURPOSE : connect IP

*/

GLOBAL void psaIPA_Dti_Req(ULONG link_id, UBYTE peer_to_connect_to, UBYTE dti_conn)
{

  PALLOC( ipa_dti_req, IPA_DTI_REQ);

  

#ifdef GPRS
  T_PDP_CONTEXT_INTERNAL *p_pdp_context_node = NULL;
    
  p_pdp_context_node = pdp_context_find_node_from_cid( work_cids[cid_pointer]);

  if( p_pdp_context_node )
  {
    p_pdp_context_node->internal_data.link_id = link_id;
  }

  /* This is probably not the right place to populate the link id since
     IPA dti req might be sent for CSD call as well ! Need to investigate
     as separate issue.
  */
#endif /* GPRS */

  TRACE_FUNCTION("psaIPA_Dti_Req");

  ipa_dti_req -> dti_conn  = dti_conn;
  ipa_dti_req -> link_id   = link_id;

  if (dti_conn EQ IPA_CONNECT_DTI)
  {
    switch( peer_to_connect_to )
    {
    case( DTI_ENTITY_UDP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_UDP].name);
      break;
#ifdef GPRS
    case( DTI_ENTITY_SNDCP ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SNDCP].name);
      break;
#endif
    case( DTI_ENTITY_PPPC ):
      ipa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)ipa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_PPPC].name);
      break;
    default:
      TRACE_EVENT("unknown conn_peer_Id: IPA_DTI_REQ not sent");
      PFREE(ipa_dti_req);
      return;
    }
  }

  PSENDX( IP, ipa_dti_req );
}


#endif /* WAP || SAT E */