view src/g23m-aci/aci/psa_l2r.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_L2R
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the protocol stack adapter
|             Layer 2 Relay ( L2R )
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_L2R_H
#define PSA_L2R_H

/*==== CONSTANTS ==================================================*/

typedef enum
{
  L2R_DEACTIVATED = 0,
  L2R_ACTIVATE,
  L2R_CONNECT,
  L2R_CONNECTED,
  L2R_ENABLE,
  L2R_ENABLED,
//  L2R_DISABLE,
  L2R_DETACH,
  L2R_DISCONNECT,
  L2R_DEACTIVATE,
  L2R_ESCAPE
} T_L2R_STATE;


/*==== TYPES ======================================================*/

typedef struct
{
  UBYTE  rlp_vers;                /* L2R_XID_IND */
  USHORT k_ms_iwf;                /* L2R_ACTIVATE_REQ, L2R_XID_IND */
  USHORT k_iwf_ms;
  UBYTE  t1;
  UBYTE  t2;
  UBYTE  n2;
  UBYTE  pt;
  UBYTE  p0;
  USHORT p1;
  UBYTE  p2;
  UBYTE  uil2p;
  UBYTE  rate;
  USHORT err_cause;               /* L2R_ERROR_IND */ 
  ULONG  error_rate;              /* L2R_STATISTIC_IND */
  USHORT reset;                   /* L2R_RESET_IND */
} T_L2R_SET_PRM;

typedef struct L2RShrdParm
{
  UBYTE         owner;
  UBYTE         state;
  UBYTE         uart_conn;
  T_L2R_SET_PRM set_prm[OWN_SRC_MAX];
  T_L2R_SET_PRM set_prm_use;
} T_L2R_SHRD_PRM;

typedef struct L2RTstPrmRef
{
  const char * key;               /* keyword string */
  UBYTE  id;                      /* corresponding id */
} L2R_TSTPRM_REF;

/*==== PROTOTYPES =================================================*/

#ifdef DTI
GLOBAL SHORT psaL2R_Enable( T_DTI_CONN_LINK_ID  link_id, UBYTE peer );
#endif /* DTI */

GLOBAL SHORT psaL2R_Activate( UBYTE srcId );
GLOBAL SHORT psaL2R_Deactivate( void );
void  psaL2R_Init (void);

GLOBAL SHORT psaL2R_ESC( UBYTE src_id );

/*==== EXPORT =====================================================*/

#ifdef PSA_L2RF_C

GLOBAL T_L2R_SHRD_PRM l2rShrdPrm;

#else

EXTERN T_L2R_SHRD_PRM l2rShrdPrm;

#endif /* PSA_L2RF_C */


#endif /* PSA_L2R_H */

/*==== EOF =======================================================*/