view src/g23m-aci/aci/psa_mmis.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the signalling functions of the 
|             protocol stack adapter for the man machine interface.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_MMIS_C
#define PSA_MMIS_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "aci.h"
#include "psa.h"
#include "psa_sms.h"
#include "psa_mmi.h"
#include "cmh.h"
#include "cmh_sms.h"
#include "cmh_mmi.h"

/*==== CONSTANTS ==================================================*/
#ifdef FF_HOMEZONE
#define CBHZ_ON_MSG_ID  0xDD
#define CBHZ_OFF_MSG_ID 0xFFFF
#endif /* HOMEZONE */

/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_Cbch             |
+-------------------------------------------------------------------+

  PURPOSE : cell broadcast channel request

*/

GLOBAL SHORT psaMMI_Cbch ( void )
{
  TRACE_FUNCTION ("psaMMI_Cbch()");

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId(smsShrdPrm.cbmPrm.cbchOwner)) 
    
    return( -1 );

/*
 *-------------------------------------------------------------------
 * create and send primitive for CBCH request
 *-------------------------------------------------------------------
 */
  if (smsShrdPrm.cbmPrm.cbmHndl NEQ BM0)   /* only if NMI for CBM is set*/
  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    /* fill in primitive parameter: CBCH request */
    memcpy ( ( CHAR * ) mmi_cbch_req -> msg_id,
             ( CHAR * ) smsShrdPrm.cbmPrm.msgId,
             sizeof ( mmi_cbch_req -> msg_id ) );

    memcpy ( ( CHAR * ) mmi_cbch_req -> dcs_id,
             ( CHAR * ) smsShrdPrm.cbmPrm.dcsId,
             sizeof ( mmi_cbch_req -> dcs_id ) );

    mmi_cbch_req -> modus = smsShrdPrm.cbmPrm.cbmMode;

    PSENDX (PL, mmi_cbch_req);
  }
  else
  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    memset (mmi_cbch_req, NOT_PRESENT_8BIT, sizeof(T_MMI_CBCH_REQ));
    mmi_cbch_req -> modus = MMI_CBCH_STOP;

    PSENDX (PL, mmi_cbch_req);
  }
  return 0;
}

#ifdef FF_HOMEZONE
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_homezone_req     |
+-------------------------------------------------------------------+

  PURPOSE : homezone request

*/

GLOBAL SHORT psaMMI_homezone_req( void )
{
  TRACE_FUNCTION ("psaMMI_homezone_req()");

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId(smsShrdPrm.cbmPrm.cbchOwner)) 
  {    
    return( -1 );
  }

/*
 *-------------------------------------------------------------------
 * create and send primitive for CBCH request
 *-------------------------------------------------------------------
 */

  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    memset (mmi_cbch_req, NOT_PRESENT_8BIT, sizeof(T_MMI_CBCH_REQ));
  
    /* fill in primitive parameter: CBCH request */
    mmi_cbch_req->modus     = CBCH_HOMEZONE;

    if ( smsShrdPrm.cbmPrm.hzMode EQ CBHZ_MOD_Active )
    {
      mmi_cbch_req->msg_id[0] = CBHZ_ON_MSG_ID;
    }
    else
    {
      mmi_cbch_req->msg_id[0] = CBHZ_OFF_MSG_ID;
    }

    mmi_cbch_req->dcs_id[0] = smsShrdPrm.cbmPrm.hzDcs;
    mmi_cbch_req->dcs_id[1] = smsShrdPrm.cbmPrm.hzTimeout;

    TRACE_EVENT_P2("MMI_CBCH_REQ: modus %d, msg_id %d", 
                    mmi_cbch_req->modus, mmi_cbch_req->msg_id[0]);

    PSENDX (PL, mmi_cbch_req);
  }
  return 0;
}
#endif /* FF_HOMEZONE */


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_Display          |
+-------------------------------------------------------------------+

  PURPOSE : set the parameters for display request

*/

GLOBAL SHORT psaMMI_Display ( void )
{

  TRACE_FUNCTION ("psaMMI_Display()");

/*
 *-------------------------------------------------------------------
 * create and send primitive for display request 
 *-------------------------------------------------------------------
 */
  {
    PSENDX (PL, mmiShrdPrm.dspRq);
  }

  return 0;
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS                MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_ConfigPrim       |
+-------------------------------------------------------------------+

  PURPOSE : send a config message to a entity

*/
#define CONFIG_STR 0x0

typedef struct
{
  char config_str[80];
} T_CONFIG_STR;


GLOBAL void psaMMI_ConfigPrim (T_HANDLE receiver_handle, 
                               char *config_msg)
{
  PALLOC (cfg_str, CONFIG_STR);

  D2P(cfg_str)->opc |= SYS_MASK;
  strcpy (cfg_str->config_str, config_msg);

  PSEND (receiver_handle, cfg_str);
}


/*==== EOF ========================================================*/