FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/psa_t30s.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : PSA_T30S +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module defines the signalling functions of the | protocol stack adapter for T30. +----------------------------------------------------------------------------- */ #if defined (DTI) || defined (FF_FAX) #ifndef PSA_T30S_C #define PSA_T30S_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "dti.h" #include "dti_conn_mng.h" #include "dti_cntrl_mng.h" #include "aci_fd.h" #include "aci.h" #include "psa.h" #include "psa_t30.h" #include "cmh.h" #include "cmh_t30.h" /*==== CONSTANTS ==================================================*/ /*==== TYPES ======================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Dti_Req | +-------------------------------------------------------------------+ PURPOSE : connect or disconnect T30 (depends on dti_conn). */ GLOBAL void psaT30_Dti_Req(T_DTI_CONN_LINK_ID link_id, UBYTE dti_conn) { T_DTI_CNTRL device_info; dti_cntrl_get_info_from_dti_id(EXTRACT_DTI_ID(link_id), &device_info); TRACE_FUNCTION ("psaT30_Dti_Req()"); { PALLOC (t30_dti_req, T30_DTI_REQ); t30_dti_req->dti_conn = dti_conn; if (device_info.dev_id EQ DTI_ENTITY_UART) strcpy((CHAR*)t30_dti_req->entity_name, UART_NAME); else if (device_info.dev_id EQ DTI_ENTITY_PSI) strcpy((CHAR*)t30_dti_req->entity_name, PSI_NAME); t30_dti_req->link_id = link_id; t30_dti_req->dti_direction = DTI_CHANNEL_TO_LOWER_LAYER; if (dti_conn EQ T30_CONNECT_DTI) { if (dti_cntrl_set_conn_parms(link_id, DTI_ENTITY_T30, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE) { return; } } PSENDX (T30, t30_dti_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Activate | +-------------------------------------------------------------------+ PURPOSE : activate T30. */ GLOBAL void psaT30_Activate (void) { TRACE_FUNCTION ("psaT30_Activate()"); { PALLOC (t30_activate_req, T30_ACTIVATE_REQ); t30_activate_req->trans_rate = t30ShrdPrm.trans_rate; t30_activate_req->half_rate = t30ShrdPrm.half_rate; t30_activate_req->threshold = t30ShrdPrm.threshold; t30_activate_req->frames_per_prim = t30ShrdPrm.frames_per_prim; t30_activate_req->bitorder = t30ShrdPrm.bitord; PSENDX (T30, t30_activate_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Capabilities | +-------------------------------------------------------------------+ PURPOSE : send selected capabilities. */ GLOBAL void psaT30_Capabilities (void) { TRACE_FUNCTION ("psaT30_Capabilities()"); { PALLOC (t30_cap_req, T30_CAP_REQ); memcpy (&t30_cap_req->hdlc_info, &t30ShrdPrm.hdlc_snd, sizeof (T_hdlc_info)); PSENDX (T30, t30_cap_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Config | +-------------------------------------------------------------------+ PURPOSE : t30 configuration. */ GLOBAL void psaT30_Config (void) { TRACE_FUNCTION ("psaT30_Config()"); { PALLOC (t30_config_req, T30_CONFIG_REQ); t30_config_req->hdlc_report = t30ShrdPrm.hdlc_report; t30_config_req->test_mode = t30ShrdPrm.test_mode; PSENDX (T30, t30_config_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Deactivate | +-------------------------------------------------------------------+ PURPOSE : deactivate T30. */ GLOBAL void psaT30_Deactivate (void) { if (t30ShrdPrm.T30_is_activated EQ FALSE) return; else t30ShrdPrm.T30_is_activated = FALSE; TRACE_FUNCTION ("psaT30_Deactivate()"); { PALLOC (t30_deactivate_req, T30_DEACTIVATE_REQ); PSENDX (T30, t30_deactivate_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Disconnect | +-------------------------------------------------------------------+ PURPOSE : disconnect request. */ GLOBAL void psaT30_Disconnect (void) { TRACE_FUNCTION ("psaT30_Disconnect()"); { PALLOC (t30_sgn_req, T30_SGN_REQ); t30_sgn_req->sgn = SGN_DCN; PSENDX (T30, t30_sgn_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Modify | +-------------------------------------------------------------------+ PURPOSE : modification of T30. */ GLOBAL void psaT30_Modify (void) { TRACE_FUNCTION ("psaT30_Modify()"); { PALLOC (t30_modify_req, T30_MODIFY_REQ); t30_modify_req->trans_rate = t30ShrdPrm.trans_rate; t30_modify_req->half_rate = t30ShrdPrm.half_rate; PSENDX (T30, t30_modify_req); } } /* +-------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : PSA_T30 | | ROUTINE : psaT30_Ppm | +-------------------------------------------------------------------+ PURPOSE : post-page message. */ GLOBAL SHORT psaT30_Ppm (void) { TRACE_FUNCTION ("psaT30_Ppm()"); { PALLOC (t30_sgn_req, T30_SGN_REQ); t30_sgn_req->sgn = t30ShrdPrm.sgn_snd; PSENDX (T30, t30_sgn_req); } return 0; } #endif /* DTI OR FF_FAX */ /*==== EOF ========================================================*/