FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/gdd_dio/gdd_dio.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: gdd_dio.h +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for the Protocol Stack Entity gdd_dio. +----------------------------------------------------------------------------- */ #ifndef GDD_DIO_H #define GDD_DIO_H /*==== INCLUDES =============================================================*/ #include "gdd_dio_data.h" /*==== CONSTS ===============================================================*/ #define VSI_CALLER GDD_DIO_handle, #define ENTITY_DATA gdd_dio_data #define ENCODE_OFFSET 0 /* Bitoffset for encoding/decoding */ #define hCommGDD_DIO gdd_dio_hCommGDD_DIO /* Communication handle */ /* Timer definitions */ #define T001 0 #define T002 1 /* Timer durations */ #define T001_VALUE 1000 /* 1 second */ #define T002_VALUE 3000 /* 3 seconds */ /* -------------- Trace classes specific to GDD_DIO entity -----------------*/ /* Trace class user 1 is used for tracing GDD and DIO signals */ #define TC_SIGNALS TC_USER1 /* Trace class user 2 is used for function traces of the function which are involved in the actual data flow. Since we expect these to be hit frequently, this special trace class has been created. */ #define TC_FUNC_DATA_FLOW TC_USER2 /* Trace class user 3 is for all functions in the "gdd_sys.h" header */ #define TC_SYS_INTERFACE TC_USER3 /* Set the following #define if a context switch in DTX is to be made. (i.e. a context switch to avoid calling a client into PSI */ /*#define GDD_MAKE_DTX_CONTEXT_SWITCH*/ #ifdef GDD_MAKE_DTX_CONTEXT_SWITCH /** Signals (internal to this entity) * The signal must also carry the connection handle, which is stored * in bit 7. This means that we currently limit our device range to 0..127 */ #define GDD_DIO_SIGNAL_SEND_DATA 0x00000000 #define GDD_DIO_SIGNAL_RECEIVE_DATA 0x00000080 #define GDD_DIO_SIGNAL_MASK 0x00000080 #define GDD_DIO_SIGNAL_CON_HANDLE_MASK 0xFFFFFF7F #endif /* GDD_MAKE_DTX_CONTEXT_SWITCH */ typedef struct { T_GDD_BUF * buf; T_GDD_CON_HANDLE con_handle; } T_GDD_DIO_SIGNAL_DATA; /*==== TYPES =================================================================*/ /* GDD_DIO global typedefs */ typedef struct /* T_GDD_DIO_DATA */ { /* Kernel service data */ T_GDD_DIO_KER_DATA ker; /** Connection service data array (one structure for each connection) */ T_GDD_DIO_CON_DATA * con_arr; /** Flag set when the con_arr memory was allocated in this entity */ BOOL con_arr_mem_allocated; /** Max number of connections that client wishes to open */ U16 max_con; /** External instnace id - passed in when calling gdd_init. */ T_GDD_INST_ID inst_id; /** DIO driver number */ T_GDD_DIO_DRV_NUM drv_num; /** DIO device range start (0 if not yet initialized by DIO IL) */ U32 device_range_start; /** DIO device range end (0 if not yet initialized by DIO IL) */ U32 device_range_end; /** DIO driver handle */ U16 drv_handle; /** DIO callback */ T_DRV_CB_FUNC signal_callback; } T_GDD_DIO_DATA; /*==== EXPORTS ===============================================================*/ short pei_create (T_PEI_INFO **info); #ifdef GDD_DIO_PEI_C /* Entity data base */ T_GDD_DIO_DATA gdd_dio_data_base [GDD_NUM_INSTS]; BOOL gdd_dio_init_flag [GDD_NUM_INSTS]; /* Communication handles */ T_HANDLE hCommGDD_DIO = VSI_ERROR; T_HANDLE GDD_DIO_handle; #else /* GDD_DIO_PEI_C */ extern T_GDD_DIO_DATA gdd_dio_data_base []; extern BOOL gdd_dio_init_flag []; extern T_HANDLE hCommGDD_DIO; extern T_HANDLE GDD_DIO_handle; #endif /* GDD_DIO_PEI_C */ #endif /* !GDD_DIO_H */